2D Alpha Shapes

Assume we are given a set $$*S* of points in 2D or 3D and we'd like to
have something like ``the shape formed by these points.'' This is
quite a vague notion and there are probably many possible
interpretations, the $$-shape being one of them. Alpha shapes
can be used for shape reconstruction from a dense unorganized set of
data points. Indeed, an $$-shape is demarcated by a frontier,
which is a linear approximation of the original shape [BB97].

As mentionned in Edelsbrunner's and Mücke's paper [EM94],
one can intuitively think of an $$-shape as the
following. Imagine a huge mass of ice-cream making up the space $$* ^{3}*
and containing the points as ``hard'' chocolate pieces. Using one of
these sphere-formed ice-cream spoons we carve out all parts of the
ice-cream block we can reach without bumping into chocolate pieces,
thereby even carving out holes in the inside (eg. parts not reachable
by simply moving the spoon from the outside). We will eventually end
up with a (not necessarily convex) object bounded by caps, arcs and
points. If we now straighten all ``round'' faces to triangles and line
segments, we have an intuitive description of what is called the
$$-shape of $$

And what is $$ in the game? $$ is the squared radius of the
carving spoon. A very small value will allow us to eat up all of the
ice-cream except the chocolate points themselves. Thus we already see
that the $$-shape degenerates to the point-set $$*S* for
$$* 0*. On the other hand, a huge value of $$
will prevent us even from moving the spoon between two points since
it's way too large. So we will never spoon up ice-cream lying in the
inside of the convex hull of $$*S*, and hence the $$-shape for
$$* * is the convex hull of $$*S*.^{1}

We distinguish two versions of alpha shapes. *Basic alpha shapes*
are based on the Delaunay triangulation. *Weighted alpha shapes*
are based on its generalization, the regular triangulation, replacing
the euclidean distance by the power to weighted points.

There is a close connection between alpha shapes and the underlying
triangulations. More precisely, the $$-complex of $$*S* is a
subcomplex of this triangulation of $$*S*, containing the $$-exposed
$$*k*-simplices, $$*0 k d*. A simplex is $$-exposed, if there is an
open disk (resp. ball) of radius $$*sqrt()* through the vertices of the
simplex that does not contain any other point of $$*S*, for the metric used in
the computation of the underlying triangulation. The corresponding
$$-shape is defined as the underlying interior space of the
$$-complex (see [EM94]).

In general, an $$-complex is a non-connected and non-pure polytope, it
means, that one $$*k*-simplex, $$*0 k d-1* is not necessary adjacent to
a $$*(k+1)*-simplex.

The $$-shapes of $$*S* form a discrete family, even though they
are defined for all real numbers $$ with $$*0 *. Thus, we can represent the entire family of $$-shapes
of $$*S* by the underlying triangulation of $$*S*. In this representation
each $$*k*-simplex of the underlying triangulation is associated with an
interval that specifies for which values of $$ the $$*k*-simplex
belongs to the $$-shape. Relying on this fact, the family of
$$-shapes can be computed efficiently and relatively
easily. Furthermore, we can select an appropriate $$-shape from a
finite number of different $$-shapes and corresponding
$$-values.

The class *CGAL::Alpha_shape_2<Dt>* represents the family of
$$-shapes of points in a plane for *all* positive
$$. It maintains the underlying triangulation *Dt* which
represents connectivity and order among squared radius of its faces. Each
$$*k*-dimensional face of the *Dt* is associated with an interval
that specifies for which values of $$ the face belongs to the
$$-shape. There are links between the intervals and the
$$*k*-dimensional faces of the triangulation.

The class *CGAL::Alpha_shape_2<Dt>* provides functions to set and
get the current $$-value, as well as an iterator that enumerates
the $$-values where the $$-shape changes.

It provides iterators to enumerate the vertices and edges that are in the $$-shape, and functions that allow to classify vertices, edges and faces with respect to the $$-shape. They can be in the interior of a face that belongs or does not belong to the $$-shape. They can be singular/regular, that is be on the boundary of the $$-shape, but not incident/incident to a triangle of the $$-complex.

Finally, it provides a function to determine the $$-value such that the $$-shape satisfies the following two properties, or at least the second one if there is no such $$ that both are satisfied:

(i) The number of components equals a number of your choice and

(ii) all data points are either on the boundary or in the interior of the regularized version of
the $$-shape (no singular edges).

The current implementation is static, that is after its construction
points cannot be inserted or removed.

We currently do not specify concepts for the underlying triangulation
type. Models that work for a basic alpha-shape are the classes
*CGAL::Delaunay_triangulation_2* and
*CGAL::Triangulation_hierarchy_2* templatized with a Delaunay
triangulation. A model that works for a weighted alpha-shape is
the class *CGAL::Regular_triangulation_2*.

The triangulation needs a geometric traits class as argument.
The requirements of this class are described in the
concept *CGAL::AlphaShapeTraits_2* for which
the CGAL kernels
and *CGAL::Weighted_alpha_shape_euclidean_traits_2* are models.

There are no requirements on the triangulation data structure.
However it must be parameterized with
vertex and face classes, which are model of the concepts
*AlphaShapeVertex_2* and *AlphaShapeFace_2*,
by default the classes *CGAL::Alpha_shape_vertex_base_2<Gt>*
and *CGAL::Alpha_shape_face_base_2<Tf>*.

The basic alpha shape needs a Delaunay triangulation as
underlying triangulation *Dt*. The Delaunay triangulation class is
parameterized with a geometric and a triangulation data structure traits.

For the geometric traits class we can use a CGAL kernel.

For the triangulation data structure traits, we have to
choose the vertex and face classes needed for alpha shapes,
namely *CGAL::Alpha_shape_vertex_base_2<Gt, Dv>* and *CGAL::Alpha_shape_face_base_2<Gt,Df>*.
As default vertex and face type they use *CGAL::Triangulation_vertex_base_2<Gt>*
and *CGAL::Triangulation_face_base_2<Gt>* respectively.

The following code sniplet shows how to obtain a basic alpha shape type.

typedef CGAL::Cartesian<double> K; typedef CGAL::Alpha_shape_vertex_base_2<K> Av; typedef CGAL::Triangulation_face_base_2<K> Tf; typedef CGAL::Alpha_shape_face_base_2<K,Tf> Af; typedef CGAL::Triangulation_default_data_structure_2<K,Av,Af> Tds; typedef CGAL::Delaunay_triangulation_2<K,Tds> Dt; typedef CGAL::Alpha_shape_2<Dt> Alpha_shape_2;

When the input data set is huge, say more than 10.000 points, it pays off to use a triangulation hierarchy. It has the same API as the Delaunay triangulation and differs only in the types of the vertices and faces. Therefore, the only part that changes are the typedefs in the beginning.

typedef CGAL::Cartesian<double> K; typedef CGAL::Alpha_shape_vertex_base_2<K> Avb; typedef CGAL::Triangulation_hierarchy_vertex_base_2<Avb> Av typedef CGAL::Triangulation_face_base_2<K> Tf; typedef CGAL::Alpha_shape_face_base_2<K,Tf> Af; typedef CGAL::Triangulation_default_data_structure_2<K,Av,Af> Tds; typedef CGAL::Delaunay_triangulation_2<K,Tds> Dt; typedef CGAL::Triangulation_hierarchy_2<Dt> Ht; typedef CGAL::Alpha_shape_2<Ht> Alpha_shape_2;

A weighted alpha shape
, needs a regular triangulation as
underlying triangulation *Dt*, and it needs a particular
face class, namely *CGAL::Regular_triangulation_face_base_2<Gt>*.
Note that there is no special weighted alpha shape class.

typedef CGAL::Cartesian<double> K; typedef CGAL::Weighted_alpha_shape_euclidean_traits_2<K> Gt; typedef CGAL::Alpha_shape_vertex_base_2<Gt> Av; typedef CGAL::Regular_triangulation_face_base_2<Gt> Rf; typedef CGAL::Alpha_shape_face_base_2<Gt,Rf> Af; typedef CGAL::Triangulation_default_data_structure_2<Gt,Av,Af> Tds; typedef CGAL::Regular_triangulation_2<Gt,Tds> Rt; typedef CGAL::Alpha_shape_2<Rt> Alpha_shape_2;

^{1} | ice cream, ice cream!!! The wording of this introductory paragraphs is borrowed from Kaspar Fischer's `` Introduction to Alpha Shapes'' which can be found at http://n.ethz.ch/student/fischerk/alphashapes/as/index.html. The picture has been taken from Walter Luh's homepage at http://www.stanford.edu/&wtilde;luh/cs448b/alphashapes.html. |

Next: Reference Manual

CGAL Open Source Project.
Release 3.2.1.
13 July 2006.