#include <CGAL/Polyhedron_3.h>

Definition

A polyhedral surface Polyhedron_3 consists of vertices V, edges E, facets F and an incidence relation on them.

Each edge is represented by two halfedges with opposite orientations.

Vertices represent points in 3d-space. Edges are straight line segments between two endpoints. Facets are planar polygons without holes defined by the circular sequence of halfedges along their boundary. The polyhedral surface itself can have holes. The halfedges along the boundary of a hole are called border halfedges and have no incident facet. An edge is a border edge if one of its halfedges is a border halfedge. A surface is closed if it contains no border halfedges. A closed surface is a boundary representation for polyhedra in three dimensions. The convention is that the halfedges are oriented counterclockwise around facets as seen from the outside of the polyhedron. An implication is that the halfedges are oriented clockwise around the vertices. The notion of the solid side of a facet as defined by the halfedge orientation extends to polyhedral surfaces with border edges although they do not define a closed object. If normal vectors are considered for the facets, normals point outwards (following the right hand rule).

The strict definition can be found in [3]. One implication of this definition is that the polyhedral surface is always an orientable and oriented 2-manifold with border edges, i.e., the neighborhood of each point on the polyhedral surface is either homeomorphic to a disc or to a half disc, except for vertices where many holes and surfaces with boundary can join. Another implication is that the smallest representable surface is a triangle (for polyhedral surfaces with border edges) or a tetrahedron (for polyhedra). Boundary representations of orientable 2-manifolds are closed under Euler operations. They are extended with operations that create or close holes in the surface.

Other intersections besides the incidence relation are not allowed, although they are not automatically handled, since self intersections are not easy to check efficiently. Polyhedron_3 does only maintain the combinatorial integrity of the polyhedral surface (using Euler operations) and does not consider the coordinates of the points or any geometric information.

The class Polyhedron_3 can represent polyhedral surfaces as well as polyhedra. The interface is designed in such a way that it is easy to ignore border edges and work only with polyhedra.

The sequence of edges can be ordered in the data structure on request such that the sequence starts with the non-border edges and ends with the border edges. Border edges are then itself ordered such that the halfedge which is incident to the facet comes first and the halfedge incident to the hole comes thereafter. This normalization step counts simultaneously the number of border edges. This number is zero if and only if the surface is a closed polyhedron. Note that this class does not maintain this counter nor the halfedge order during further modifications. There is no automatic caching done for auxiliary information.

Parameters

The full template declaration of Polyhedron_3 states four template parameters:

template < class PolyhedronTraits_3,
           class PolyhedronItems_3 = CGAL::Polyhedron_items_3,
           template < class T, class I>
           class HalfedgeDS = CGAL::HalfedgeDS_default,
           class Alloc = CGAL_ALLOCATOR(int) >
class Polyhedron_3;

The first parameter requires a model of the PolyhedronTraits_3 concept as argument, for example CGAL::Polyhedron_traits_3. The second parameter expects a model of the PolyhedronItems_3 concept. By default, the class CGAL::Polyhedron_items_3 is preselected. The third parameter is a class template. A model of the HalfedgeDS concept is expected. By default, the class CGAL::HalfedgeDS_default is preselected, which is a list based implementation of the halfedge data structure. The fourth parameter Alloc requires a standard allocator for STL container classes. The rebind mechanism from Alloc will be used to create appropriate allocators internally. A default is provided with the macro CGAL_ALLOCATOR(int) from the <CGAL/memory.h> header file.

See Also: CGAL::Polyhedron_3::Vertex; CGAL::Polyhedron_3::Halfedge; CGAL::Polyhedron_3::Facet; PolyhedronTraits_3; CGAL::Polyhedron_traits_3<Kernel>; PolyhedronItems_3; CGAL::Polyhedron_items_3; HalfedgeDS; CGAL::HalfedgeDS_default; CGAL::Polyhedron_incremental_builder_3<HDS>; CGAL::Modifier_base.

Example

This example program instantiates a polyhedron using the default traits class and creates a tetrahedron.

File Polyhedron/polyhedron_prog_simple.cpp

#include <CGAL/Simple_cartesian.h>
#include <CGAL/Polyhedron_3.h>
typedef CGAL::Simple_cartesian<double>     Kernel;
typedef CGAL::Polyhedron_3<Kernel>         Polyhedron;
typedef Polyhedron::Halfedge_handle        Halfedge_handle;
int main() {
    Polyhedron P;
    Halfedge_handle h = P.make_tetrahedron();
    if ( P.is_tetrahedron(h))
        return 0;
    return 1;
}

Examples:: Polyhedron/polyhedron_prog_color.cpp, Polyhedron/polyhedron_prog_cube.cpp, Polyhedron/polyhedron_prog_incr_builder.cpp, Polyhedron/polyhedron_prog_normals.cpp, Polyhedron/polyhedron_prog_off.cpp, Polyhedron/polyhedron_prog_planes.cpp, Polyhedron/polyhedron_prog_simple.cpp, Polyhedron/polyhedron_prog_subdiv.cpp, Polyhedron/polyhedron_prog_tetra.cpp, Polyhedron/polyhedron_prog_vector.cpp, and Polyhedron_IO/polyhedron2vrml.cpp.

Classes
class	Facet
	A facet optionally stores a plane equation, and a reference to an incident halfedge that points to the facet. More...

class	Halfedge
	A halfedge is an oriented edge between two vertices. More...

class	Vertex
	A vertex optionally stores a point and a reference to an incident halfedge that points to the vertex. More...

Related Functions
(Note that these are not member functions.)
template<class PolyhedronTraits_3 >
std::istream &	operator>> (std::istream &in, CGAL::Polyhedron_3< PolyhedronTraits_3 > &P)

template<class PolyhedronTraits_3 >
std::ostream &	operator<< (std::ostream &out, CGAL::Polyhedron_3< PolyhedronTraits_3 > &P)

Types
typedef unspecified_type	Items
	items class selected for `PolyhedronItems_3`.

typedef unspecified_type	HalfedgeDS
	instantiated halfedge data structure.

typedef unspecified_type	size_type
	size type of `HalfedgeDS`.

typedef unspecified_type	difference_type
	difference type of `HalfedgeDS`.

typedef unspecified_type	iterator_category
	iterator category of `HalfedgeDS` for all iterators.

typedef unspecified_type	circulator_category
	circulator category of all circulators; bidirectional category if the `Items::Halfedge` provides a `Halfedge::prev()` member function, otherwise forward category.

typedef unspecified_type	allocator_type
	allocator type `Alloc`.

Handles, Iterators, and Circulators
The following handles, iterators, and circulators have appropriate non-mutable counterparts, i.e., `const_handle`, `const_iterator`, and `const_circulator`. The mutable types are assignable to their non-mutable counterparts. Both circulators are assignable to the `Halfedge_iterator`. The iterators are assignable to the respective handle types. Wherever the handles appear in function parameter lists, the corresponding iterators can be used as well. For convenience, the `Edge_iterator` enumerates every other halfedge. It is based on the `CGAL::N_step_adaptor` class. For convenience, the `Point_iterator` enumerates all points in the polyhedral surface in the same order as the `Vertex_iterator`, but with the value type `Point`. Similarly, a `Plane_iterator` is provided. All handles are model of `LessThanComparable` and `Hashable`, that is they can be used as keys in containers such as `std::map` and `boost::unordered_map`.
typedef unspecified_type	Point_3
	point stored in vertices.

typedef unspecified_type	Plane_3
	plane equation stored in facets (if supported).

typedef unspecified_type	Vertex_handle
	handle to vertex.

typedef unspecified_type	Halfedge_handle
	handle to halfedge.

typedef unspecified_type	Facet_handle
	handle to facet.

typedef unspecified_type	Vertex_iterator
	iterator over all vertices.

typedef unspecified_type	Halfedge_iterator
	iterator over all halfedges.

typedef unspecified_type	Facet_iterator
	iterator over all facets.

typedef unspecified_type	Halfedge_around_vertex_circulator
	circulator of halfedges around a vertex (cw).

typedef unspecified_type	Halfedge_around_facet_circulator
	circulator of halfedges around a facet (ccw).

typedef unspecified_type	Edge_iterator
	iterator over all edges (every other halfedge).

typedef unspecified_type	Point_iterator
	iterator over all points.

typedef unspecified_type	Plane_iterator
	iterator over all plane equations.

Types for Tagging Optional Features
The following types are equal to either `Tag_true` or `Tag_false` , depending on whether the named feature is supported or not.
typedef unspecified_type	Supports_vertex_halfedge
	`Vertex::halfedge()`.

typedef unspecified_type	Supports_vertex_point
	`Vertex::point()`.

typedef unspecified_type	Supports_halfedge_prev
	`Halfedge::prev()`.

typedef unspecified_type	Supports_halfedge_vertex
	`Halfedge::vertex()`.

typedef unspecified_type	Supports_halfedge_facet
	`Halfedge::facet()`.

typedef unspecified_type	Supports_facet_halfedge
	`Facet::halfedge()`.

typedef unspecified_type	Supports_facet_plane
	`Facet::plane()`.

typedef unspecified_type	Supports_removal
	supports removal of individual elements.

Creation
	Polyhedron_3 (const Traits &traits=Traits())
	Default constructor.

	Polyhedron_3 (size_type v, size_type h, size_type f, const Traits &traits=Traits())
	Constructor of a polyhedron with storage reserved for `v` vertices, `h` halfedges, and `f` facets. More...

void	reserve (size_type v, size_type h, size_type f)
	reserve storage for `v` vertices, `h` halfedges, and `f` facets. More...

Halfedge_handle	make_tetrahedron ()
	a tetrahedron is added to the polyhedral surface. More...

Halfedge_handle	make_tetrahedron (const Point &p1, const Point &p2, const Point &p3, const Point &p4)
	a tetrahedron is added to the polyhedral surface with its vertices initialized to `p1`, `p2`, `p3`, and `p4`. More...

Halfedge_handle	make_triangle ()
	a triangle with border edges is added to the polyhedral surface. More...

Halfedge_handle	make_triangle (const Point &p1, const Point &p2, const Point &p3)
	a triangle with border edges is added to the polyhedral surface with its vertices initialized to `p1`, `p2`, and `p3`. More...

Access Member Functions
bool	empty () const
	returns true if the polyhedron is empty.

size_type	size_of_vertices () const
	number of vertices.

size_type	size_of_halfedges () const
	number of halfedges (incl. border halfedges).

size_type	size_of_facets () const
	number of facets.

size_type	capacity_of_vertices () const
	space reserved for vertices.

size_type	capacity_of_halfedges () const
	space reserved for halfedges.

size_type	capacity_of_facets () const
	space reserved for facets.

size_t	bytes () const
	bytes used for the polyhedron.

size_t	bytes_reserved () const
	bytes reserved for the polyhedron.

allocator_type	get_allocator () const
	allocator object.

Vertex_iterator	vertices_begin ()
	iterator over all vertices.

Vertex_iterator	vertices_end ()
	past-the-end iterator.

Halfedge_iterator	halfedges_begin ()
	iterator over all halfedges.

Halfedge_iterator	halfedges_end ()
	past-the-end iterator.

Facet_iterator	facets_begin ()
	iterator over all facets (excluding holes).

Facet_iterator	facets_end ()
	past-the-end iterator.

Edge_iterator	edges_begin ()
	iterator over all edges.

Edge_iterator	edges_end ()
	past-the-end iterator.

Point_iterator	points_begin ()
	iterator over all points.

Point_iterator	points_end ()
	past-the-end iterator.

Plane_iterator	planes_begin ()
	iterator over all plane equations.

Plane_iterator	planes_end ()
	past-the-end iterator.

const Traits &	traits () const
	returns the traits class.

Combinatorial Predicates
bool	is_closed () const
	returns `true` if there are no border edges.

bool	is_pure_bivalent () const
	returns `true` if all vertices have exactly two incident edges.

bool	is_pure_trivalent () const
	returns `true` if all vertices have exactly three incident edges.

bool	is_pure_triangle () const
	returns `true` if all facets are triangles.

bool	is_pure_quad () const
	returns `true` if all facets are quadrilaterals.

bool	is_triangle (Halfedge_const_handle h) const
	`true` iff the connected component denoted by `h` is a triangle.

bool	is_tetrahedron (Halfedge_const_handle h) const
	`true` iff the connected component denoted by `h` is a tetrahedron.

Euler Operators (Combinatorial Modifications)
The following Euler operations modify consistently the combinatorial structure of the polyhedral surface. The geometry remains unchanged.
Halfedge_handle	split_facet (Halfedge_handle h, Halfedge_handle g)
	splits the facet incident to `h` and `g` into two facets with a new diagonal between the two vertices denoted by `h` and `g` respectively. More...

Halfedge_handle	join_facet (Halfedge_handle h)
	joins the two facets incident to `h`. More...

Halfedge_handle	split_vertex (Halfedge_handle h, Halfedge_handle g)
	splits the vertex incident to `h` and `g` into two vertices, the old vertex remains and a new copy is created, and connects them with a new edge. More...

Halfedge_handle	join_vertex (Halfedge_handle h)
	joins the two vertices incident to `h`. More...

Halfedge_handle	split_edge (Halfedge_handle h)
	splits the halfedge `h` into two halfedges inserting a new vertex that is a copy of `h->opposite()->vertex()`. More...

Halfedge_handle	flip_edge (Halfedge_handle h)
	performs an edge flip. More...

Halfedge_handle	create_center_vertex (Halfedge_handle h)
	barycentric triangulation of `h->facet()`. More...

Halfedge_handle	erase_center_vertex (Halfedge_handle g)
	reverses `create_center_vertex()`. More...

Euler Operators Modifying Genus
Halfedge_handle	split_loop (Halfedge_handle h, Halfedge_handle i, Halfedge_handle j)
	cuts the polyhedron into two parts along the cycle `(h,i,j)` (edge `j` runs on the backside of the three dimensional figure above). More...

Halfedge_handle	join_loop (Halfedge_handle h, Halfedge_handle g)
	glues the boundary of the two facets denoted by `h` and `g` together and returns `h`. More...

Modifying Facets and Holes
Halfedge_handle	make_hole (Halfedge_handle h)
	removes the incident facet of `h` and changes all halfedges incident to the facet into border edges. More...

Halfedge_handle	fill_hole (Halfedge_handle h)
	fills a hole with a newly created facet. More...

Halfedge_handle	add_vertex_and_facet_to_border (Halfedge_handle h, Halfedge_handle g)
	creates a new facet within the hole incident to `h` and `g` by connecting the tip of `g` with the tip of `h` with two new halfedges and a new vertex and filling this separated part of the hole with a new facet, such that the new facet is incident to `g`. More...

Halfedge_handle	add_facet_to_border (Halfedge_handle h, Halfedge_handle g)
	creates a new facet within the hole incident to `h` and `g` by connecting the vertex denoted by `g` with the vertex denoted by `h` with a new halfedge and filling this separated part of the hole with a new facet, such that the new facet is incident to `g`. More...

Erasing
void	erase_facet (Halfedge_handle h)
	removes the incident facet of `h` and changes all halfedges incident to the facet into border edges or removes them from the polyhedral surface if they were already border edges. More...

void	erase_connected_component (Halfedge_handle h)
	removes the vertices, halfedges, and facets that belong to the connected component of `h`. More...

unsigned int	keep_largest_connected_components (unsigned int nb_components_to_keep)
	Erases the small connected components and the isolated vertices. More...

void	clear ()
	removes all vertices, halfedges, and facets.

Operations with Border Halfedges
Advanced Halfedges incident to a hole are called border halfedges. A halfedge is a border edge if itself or its opposite halfedge are border halfedges. The only requirement to work with border halfedges is that the `Halfedge` class provides a member function `Halfedge::is_border()` returning a `bool`. Usually, the halfedge data structure supports facets and a `NULL` facet pointer will indicate a border halfedge, but this is not the only possibility. The `is_border()` predicate divides the edges into two classes, the border edges and the non-border edges. The following normalization reorganizes the sequential storage of the edges such that the non-border edges precede the border edges, and that for each border edge the latter one of the two halfedges is a border halfedge (the first one is a non-border halfedge in conformance with the polyhedral surface definition). The normalization stores the number of border halfedges and the halfedge iterator the border edges start at within the data structure. Halfedge insertion or removal and changing the border status of a halfedge invalidate these values. They are not automatically updated.
void	normalize_border ()
	sorts halfedges such that the non-border edges precede the border edges. More...

size_type	size_of_border_halfedges () const
	number of border halfedges. More...

size_type	size_of_border_edges () const
	number of border edges. More...

Halfedge_iterator	border_halfedges_begin ()
	halfedge iterator starting with the border edges. More...

Edge_iterator	border_edges_begin ()
	edge iterator starting with the border edges. More...

Miscellaneous
void	inside_out ()
	reverses facet orientations (incl. plane equations if supported).

bool	is_valid (bool verbose=false, int level=0) const
	returns `true` if the polyhedral surface is combinatorially consistent. More...

bool	normalized_border_is_valid (bool verbose=false) const
	returns `true` if the border halfedges are in normalized representation, which is when enumerating all halfedges with the iterator: The non-border edges precede the border edges and for border edges, the second halfedge is the border halfedge. More...

void	delegate (CGAL::Modifier_base< HDS > &m)
	This is an advanced function. More...

Constructor & Destructor Documentation

template<typename Traits >

CGAL::Polyhedron_3< Traits >::Polyhedron_3	(	size_type	v,
		size_type	h,
		size_type	f,
		const Traits &	traits = `Traits()`
	)

Constructor of a polyhedron with storage reserved for v vertices, h halfedges, and f facets.

The reservation sizes are a hint for optimizing storage allocation.

Member Function Documentation

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::add_facet_to_border	(	Halfedge_handle	h,
		Halfedge_handle	g
	)

creates a new facet within the hole incident to h and g by connecting the vertex denoted by g with the vertex denoted by h with a new halfedge and filling this separated part of the hole with a new facet, such that the new facet is incident to g.

Returns the halfedge of the new edge that is incident to the new facet.

Precondition: h->is_border(), g->is_border(), h != g, h->next() != g, and g can be reached along the same hole starting with h.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::add_vertex_and_facet_to_border	(	Halfedge_handle	h,
		Halfedge_handle	g
	)

creates a new facet within the hole incident to h and g by connecting the tip of g with the tip of h with two new halfedges and a new vertex and filling this separated part of the hole with a new facet, such that the new facet is incident to g.

Returns the halfedge of the new edge that is incident to the new facet and the new vertex.

Precondition: h->is_border(), g->is_border(), h != g, and g can be reached along the same hole starting with h.

template<typename Traits >

Edge_iterator CGAL::Polyhedron_3< Traits >::border_edges_begin ( )

edge iterator starting with the border edges.

The range [edges_begin(), border_edges_begin()) denotes all non-border edges. The range [border_edges_begin(), edges_end()) denotes all border edges.

Precondition: last normalize_border() call still valid, see above.

template<typename Traits >

Halfedge_iterator CGAL::Polyhedron_3< Traits >::border_halfedges_begin ( )

halfedge iterator starting with the border edges.

The range [halfedges_begin(), border_halfedges_begin()) denotes all non-border halfedges. The range [border_halfedges_begin(), halfedges_end()) denotes all border edges.

Precondition: last normalize_border() call still valid, see above.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::create_center_vertex ( Halfedge_handle h)

barycentric triangulation of h->facet().

Creates a new vertex, a copy of h->vertex(), and connects it to each vertex incident to h->facet() splitting h->facet() into triangles. h remains incident to the original facet, all other triangles are copies of this facet. Returns the halfedge h->next() after the operation, i.e., a halfedge pointing to the new vertex. The time is proportional to the size of the facet.

Precondition: h is not a border halfedge.

template<typename Traits >

void CGAL::Polyhedron_3< Traits >::delegate ( CGAL::Modifier_base< HDS > & m)

This is an advanced function.

Advanced

calls the Modifier_base::operator()() of the modifier m.

Precondition: The polyhedral surface must be valid when the modifier returns from execution.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::erase_center_vertex ( Halfedge_handle g)

reverses create_center_vertex().

Erases the vertex pointed to by g and all incident halfedges thereby merging all incident facets. Only g->facet() remains. The neighborhood of g->vertex() may not be triangulated, it can have larger facets. Returns the halfedge g->prev(). Thus, the invariant h == erase_center_vertex( create_center_vertex(h)) holds if h is not a border halfedge. The time is proportional to the sum of the size of all incident facets.

Precondition: None of the incident facets of g->vertex() is a hole. There are at least two distinct facets incident to the facets that are incident to g->vertex(). (This prevents the operation from collapsing a volume into two facets glued together with opposite orientations, such as would happen with any vertex of a tetrahedron.); Supports_removal must be CGAL::Tag_true.

template<typename Traits >

void CGAL::Polyhedron_3< Traits >::erase_connected_component ( Halfedge_handle h)

removes the vertices, halfedges, and facets that belong to the connected component of h.

Precondition: Supports_removal must be CGAL::Tag_true.

template<typename Traits >

void CGAL::Polyhedron_3< Traits >::erase_facet ( Halfedge_handle h)

removes the incident facet of h and changes all halfedges incident to the facet into border edges or removes them from the polyhedral surface if they were already border edges.

If this creates isolated vertices they get removed as well. See make_hole(h) for a more specialized variant.

Precondition: h->is_border() == false.; Supports_removal must be CGAL::Tag_true

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::fill_hole ( Halfedge_handle h)

fills a hole with a newly created facet.

Makes all border halfedges of the hole denoted by h incident to the new facet. Returns h.

Precondition: h.is_border().

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::flip_edge ( Halfedge_handle h)

performs an edge flip.

It returns h after rotating the edge h one vertex in the direction of the face orientation.

Precondition: h != Halfedge_handle() and both facets incident to h are triangles.

template<typename Traits >

bool CGAL::Polyhedron_3< Traits >::is_valid	(	bool	verbose = `false`,
		int	level = `0`
	)		const

returns true if the polyhedral surface is combinatorially consistent.

If verbose is true, statistics are printed to cerr. For level == 1 the normalization of the border edges is checked too. This method checks in particular level 3 of CGAL::Halfedge_data_structure_decorator::is_valid() from CGAL::HalfedgeDS_const_decorator and that each facet is at least a triangle and that the two incident facets of a non-border edge are distinct.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::join_facet ( Halfedge_handle h)

joins the two facets incident to h.

The facet incident to h->opposite() gets removed. Both facets might be holes. Returns the predecessor of h around the facet. The invariant join_facet( split_facet( h, g)) returns h and keeps the polyhedron unchanged. The time is proportional to the size of the facet removed and the time to compute h->prev().

Precondition: The degree of both vertices incident to h is at least three (no antennas).; Supports_removal must be CGAL::Tag_true.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::join_loop	(	Halfedge_handle	h,
		Halfedge_handle	g
	)

glues the boundary of the two facets denoted by h and g together and returns h.

Both facets and the vertices along the facet denoted by g gets removed. Both facets may be holes. The invariant join_loop( h, split_loop( h, i, j)) returns h and keeps the polyhedron unchanged.

Precondition: The facets denoted by h and g are different and have equal degree (i.e., number of edges).; Supports_removal must be CGAL::Tag_true.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::join_vertex ( Halfedge_handle h)

joins the two vertices incident to h.

The vertex denoted by h->opposite() gets removed. Returns the predecessor of h around the vertex, i.e., h->opposite()->prev(). The invariant join_vertex( split_vertex( h, g)) returns h and keeps the polyhedron unchanged. The time is proportional to the degree of the vertex removed and the time to compute h->prev() and h->opposite()->prev().

Precondition: The size of both facets incident to h is at least four (no multi-edges).; Supports_removal must be CGAL::Tag_true.

template<typename Traits >

unsigned int CGAL::Polyhedron_3< Traits >::keep_largest_connected_components ( unsigned int nb_components_to_keep)

Erases the small connected components and the isolated vertices.

Keep nb_components_to_keep largest connected components. Returns the number of connected components erased (ignoring isolated vertices).

The polyhedron type must support vertices, halfedges, and removal operations.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::make_hole ( Halfedge_handle h)

removes the incident facet of h and changes all halfedges incident to the facet into border edges.

Returns h. See erase_facet(h) for a more generalized variant.

Precondition: None of the incident halfedges of the facet is a border edge.; Supports_removal must be CGAL::Tag_true.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::make_tetrahedron ( )

a tetrahedron is added to the polyhedral surface.

Returns a halfedge of the tetrahedron.

Examples:: Polyhedron/polyhedron_prog_color.cpp, and Polyhedron/polyhedron_prog_simple.cpp.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::make_tetrahedron	(	const Point &	p1,
		const Point &	p2,
		const Point &	p3,
		const Point &	p4
	)

a tetrahedron is added to the polyhedral surface with its vertices initialized to p1, p2, p3, and p4.

Returns that halfedge of the tetrahedron which incident vertex is initialized to p1. The incident vertex of the next halfedge is p2, and the vertex thereafter is p3. The remaining fourth vertex is initialized to p4.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::make_triangle ( )

a triangle with border edges is added to the polyhedral surface.

Returns a non-border halfedge of the triangle.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::make_triangle	(	const Point &	p1,
		const Point &	p2,
		const Point &	p3
	)

a triangle with border edges is added to the polyhedral surface with its vertices initialized to p1, p2, and p3.

Returns that non-border halfedge of the triangle which incident vertex is initialized to p1. The incident vertex of the next halfedge is p2, and the vertex thereafter is p3.

template<typename Traits >

void CGAL::Polyhedron_3< Traits >::normalize_border ( )

sorts halfedges such that the non-border edges precede the border edges.

For each border edge the halfedge iterator will reference the halfedge incident to the facet right before the halfedge incident to the hole.

template<typename Traits >

bool CGAL::Polyhedron_3< Traits >::normalized_border_is_valid ( bool verbose = false) const

returns true if the border halfedges are in normalized representation, which is when enumerating all halfedges with the iterator: The non-border edges precede the border edges and for border edges, the second halfedge is the border halfedge.

The halfedge iterator border_halfedges_begin() denotes the first border edge. If verbose is true, statistics are printed to cerr.

template<typename Traits >

void CGAL::Polyhedron_3< Traits >::reserve	(	size_type	v,
		size_type	h,
		size_type	f
	)

reserve storage for v vertices, h halfedges, and f facets.

The reservation sizes are a hint for optimizing storage allocation. If the capacity is already greater than the requested size nothing happens. If the capacity changes all iterators and circulators might invalidate.

template<typename Traits >

size_type CGAL::Polyhedron_3< Traits >::size_of_border_edges ( ) const

number of border edges.

Since each border edge of a polyhedral surface has exactly one border halfedge, this number is equal to size_of_border_halfedges().

Precondition: last normalize_border() call still valid, see above.

template<typename Traits >

size_type CGAL::Polyhedron_3< Traits >::size_of_border_halfedges ( ) const

number of border halfedges.

Precondition: last normalize_border() call still valid, see above.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::split_edge ( Halfedge_handle h)

splits the halfedge h into two halfedges inserting a new vertex that is a copy of h->opposite()->vertex().

Is equivalent to split_vertex( h->prev(), h->opposite())->opposite(). The call of prev() can make this method slower than a direct call of split_vertex() if the previous halfedge is already known and computing it would be costly when the halfedge data structure does not support the prev() member function. Returns the new halfedge hnew pointing to the inserted vertex. The new halfedge is followed by the old halfedge, i.e., hnew->next() == h.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::split_facet	(	Halfedge_handle	h,
		Halfedge_handle	g
	)

splits the facet incident to h and g into two facets with a new diagonal between the two vertices denoted by h and g respectively.

The second (new) facet is a copy of the first facet. Returns h->next() after the operation, i.e., the new diagonal. The new face is to the right of the new diagonal, the old face is to the left. The time is proportional to the distance from h to g around the facet.

Precondition: h and g are incident to the same facet. h != g (no loops). h->next() != g and g->next() != h (no multi-edges).

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::split_loop	(	Halfedge_handle	h,
		Halfedge_handle	i,
		Halfedge_handle	j
	)

cuts the polyhedron into two parts along the cycle (h,i,j) (edge j runs on the backside of the three dimensional figure above).

Three new vertices (one copy for each vertex in the cycle) and three new halfedges (one copy for each halfedge in the cycle), and two new triangles are created. h,i,j will be incident to the first new triangle. The return value will be the halfedge incident to the second new triangle which is the copy of h-opposite().

Precondition: h, i, j denote distinct, consecutive vertices of the polyhedron and form a cycle: i.e., h->vertex() == i->opposite()->vertex(), \( \ldots\) , j->vertex() == h->opposite()->vertex(). The six facets incident to (h,i,j) are all distinct.

template<typename Traits >

Halfedge_handle CGAL::Polyhedron_3< Traits >::split_vertex	(	Halfedge_handle	h,
		Halfedge_handle	g
	)

splits the vertex incident to h and g into two vertices, the old vertex remains and a new copy is created, and connects them with a new edge.

Let hnew be h->next()->opposite() after the split, i.e., a halfedge of the new edge. The split regroups the halfedges around the two vertices. The halfedge sequence hnew, g->next()->opposite(), \( \ldots\) , h remains around the old vertex, while the halfedge sequence hnew->opposite(), h->next()->opposite() (before the split), \( \ldots\) , g is regrouped around the new vertex. The split returns hnew, i.e., the new halfedge incident to the old vertex. The time is proportional to the distance from h to g around the vertex.

Precondition: h and g are incident to the same vertex. h != g (antennas are not allowed).

Note: A special application of the split is split_vertex(h,h->next()->opposite()) which is equivalent to an edge split of the halfedge h->next() that creates a new vertex on the halfedge h->next(). See also split_edge(h) below.

Definition

Classes

Related Functions

Types

Handles, Iterators, and Circulators

Types for Tagging Optional Features

Creation

Access Member Functions

Combinatorial Predicates

Euler Operators (Combinatorial Modifications)

Euler Operators Modifying Genus

Modifying Facets and Holes

Erasing

Operations with Border Halfedges

Miscellaneous

Constructor & Destructor Documentation

Member Function Documentation