#include <CGAL/Regular_triangulation_2.h>

Inherits from

Definition

The class Regular_triangulation_2 is designed to maintain the regular triangulation of a set of weighted points.

Let \( { PW} = \{(p_i, w_i), i = 1, \ldots , n \}\) be a set of weighted points where each \( p_i\) is a point and each \( w_i\) is a scalar called the weight of point \( p_i\). Alternatively, each weighted point \( (p_i, w_i)\) can be regarded as a two dimensional sphere with center \( p_i\) and radius \( r_i=\sqrt{w_i}\).

The power diagram of the set \( { PW}\) is a planar partition such that each cell corresponds to sphere \( (p_i, w_i)\) of \( { PW}\) and is the locus of points \( p\) whose power with respect to \( (p_i, w_i)\) is less than its power with respect to any other sphere \( (p_j, w_j)\) in \( { PW}\). The dual of this diagram is a triangulation whose domain covers the convex hull of the set \( { P}= \{ p_i, i = 1, \ldots , n \}\) of center points and whose vertices are a subset of \( { P}\). Such a triangulation is called a regular triangulation. The three points \( p_i, p_j\) and \( p_k\) of \( { P}\) form a triangle in the regular triangulation of \( { PW}\) iff there is a point \( p\) of the plane whose powers with respect to \( (p_i, w_i)\), \( (p_j, w_j)\) and \( (p_k, w_k)\) are equal and less than the power of \( p\) with respect to any other sphere in \( { PW}\).

Let us defined the power product of two weighted points \( (p_i, w_i)\) and \( (p_j, w_j)\) as:

\[ \Pi(p_i, w_i,p_j, w_j) = p_ip_j ^2 - w_i - w_j . \]

\( \Pi(p_i, w_i,p_j, 0)\) is simply the power of point \( p_j\) with respect to the sphere \( (p_i, w_i)\), and two weighted points are said to be orthogonal if their power product is null. The power circle of three weighted points \( (p_i, w_i)\), \( (p_j, w_j)\) and \( (p_k, w_k)\) is defined as the unique circle \( (\pi, \omega)\) orthogonal to \( (p_i, w_i)\), \( (p_j, w_j)\) and \( (p_k, w_k)\).

The regular triangulation of the sets \( { PW}\) satisfies the following regular property (which just reduces to the Delaunay property when all the weights are null): a triangle \( p_ip_jp_k\) of the regular triangulation of \( { PW}\) is such that the power product of any weighted point \( (p_l, w_l)\) of \( { PW}\) with the power circle of \( (p_i, w_i)\), \( (p_j, w_j)\) is \( (p_k, w_k)\) is positive or null. We call power test of the weighted point \( (p_l, w_l)\) with respect to the face \( p_ip_jp_k\), the predicates testing the sign of the power product of \( (p_l, w_l)\) with respect to the power circle of \( (p_i, w_i)\), \( (p_j, w_j)\) is \( (p_k, w_k)\). This power product is given by the following determinant

\[ \left| \begin{array}{cccc} 1 & x_i & y_i & x_i ^2 + y_i ^2 - w_i \\ 1 & x_j & y_j & x_j ^2 + y_j ^2 - w_j \\ 1 & x_k & y_k & x_k ^2 + y_k ^2 - w_k \\ 1 & x_l & y_l & x_l ^2 + y_l ^2 - w_l \end{array} \right| \]

A pair of neighboring faces \( p_ip_jp_k\) and \( p_ip_jp_l\) is said to be locally regular (with respect to the weights in \( { PW}\)) if the power test of \( (p_l,w_l)\) with respect to \( p_ip_jp_k\) is positive. A classical result of computational geometry establishes that a triangulation of the convex hull of \( { P}\) such that any pair of neighboring faces is regular with respect to \( { PW}\), is a regular triangulation of \( { PW}\).

Alternatively, the regular triangulation of the weighted points set \( { PW}\) can be obtained as the projection on the two dimensional plane of the convex hull of the set of three dimensional points \( { P'}= \{ (p_i,p_i ^2 - w_i ), i = 1, \ldots , n \}\).

The vertices of the regular triangulation of a set of weighted points \( { PW}\) form only a subset of the set of center points of \( { PW}\). Therefore the insertion of a weighted point in a regular triangulation does not necessarily imply the creation of a new vertex. If the new inserted point does not appear as a vertex in the regular triangulation, it is said to be hidden.

Hidden points are stored in special vertices called hidden vertices. A hidden point is considered as hidden by the facet of the triangulation where its point component is located : in fact, the hidden point can appear as vertex of the triangulation only if this facet is removed. Each face of a regular triangulation stores the list of hidden vertices whose points are located in the facet. When a facet is removed, points hidden by this facet are reinserted in the triangulation.

Template Parameters

Traits is the geometric traits parameter and must be a model of the concept RegularTriangulationTraits_2. The concept RegularTriangulationTraits_2 refines the concept TriangulationTraits_2 by adding the type Weighted_point_2 to describe weighted points and the type Power_side_of_oriented_power_circle_2 to perform power tests on weighted points.

Tds must be a model of TriangulationDataStructure_2. The face base of a regular triangulation has to be a model of the concept RegularTriangulationFaceBase_2. while the vertex base class has to be a model of RegularTriangulationVertexBase_2. CGAL provides a default instantiation for the Tds parameter by the class Triangulation_data_structure_2 < Regular_triangulation_vertex_base_2<Traits>, Regular_triangulation_face_base_2<Traits> >.

See Also: CGAL::Triangulation_2<Traits,Tds>; TriangulationDataStructure_2; RegularTriangulationTraits_2; RegularTriangulationFaceBase_2; RegularTriangulationVertexBase_2; CGAL::Regular_triangulation_face_base_2<Traits>; CGAL::Regular_triangulation_vertex_base_2<Traits>

Examples:: Triangulation_2/info_insert_with_pair_iterator_regular_2.cpp, and Triangulation_2/regular.cpp.

Types
typedef Traits::Distance	Distance

typedef Traits::Line	Line

typedef Traits::Ray	Ray

typedef Traits::Point_2	Bare_point

typedef Traits::Weighted_point_2	Weighted_point

typedef unspecified_type	All_vertices_iterator
	An iterator that allows to enumerate the vertices that are not hidden.

typedef unspecified_type	Finite_vertices_iterator
	An iterator that allows to enumerate the finite vertices that are not hidden.

typedef unspecified_type	Hidden_vertices_iterator
	An iterator that allows to enumerate the hidden vertices.

Creation
	Regular_triangulation_2 (const Traits &gt=Traits())
	Introduces an empty regular triangulation.

	Regular_triangulation_2 (const Regular_triangulation_2 &rt)
	Copy constructor.

template<class InputIterator >
Regular_triangulation_2 < Traits, Tds >	Regular_triangulation_2 (InputIterator first, InputIterator last, Traits gt=Traits())
	Equivalent to constructing an empty triangulation with the optional traits class argument and calling insert(first,last).

Insertion and Removal
Vertex_handle	insert (const Weighted_point &p, Face_handle f=Face_handle())
	inserts weighted point `p` in the regular triangulation. More...

Vertex_handle	insert (const Weighted_point &p, Locate_type lt, Face_handle loc, int li)
	insert a weighted point `p` whose bare-point is assumed to be located in `lt,loc,li`. More...

Vertex_handle	push_back (const Point &p)
	Equivalent to `insert(p)`.

template<class InputIterator >
std::ptrdiff_t	insert (InputIterator first, InputIterator last)
	inserts the weighted points in the range `[first,last)`. More...

template<class WeightedPointWithInfoInputIterator >
std::ptrdiff_t	insert (WeightedPointWithInfoInputIterator first, WeightedPointWithInfoInputIterator last)
	inserts the weighted points in the range `[first,last)`. More...

void	remove (Vertex_handle v)
	removes the vertex from the triangulation.

Queries
template<class OutputItFaces , class OutputItBoundaryEdges , class OutputItHiddenVertices >
CGAL::Triple< OutputItFaces, OutputItBoundaryEdges, OutputItHiddenVertices >	get_conflicts_and_boundary_and_hidden_vertices (const Weighted_point &p, OutputItFaces fit, OutputItBoundaryEdges eit, OutputItHiddenVertices vit, Face_handle start) const
	outputs the faces, boundary edges, and hidden vertices of the conflict zone of point `p` to output iterators. More...

template<class OutputItFaces , class OutputItBoundaryEdges >
std::pair< OutputItFaces, OutputItBoundaryEdges >	get_conflicts_and_boundary (const Weighted_point &p, OutputItFaces fit, OutputItBoundaryEdges eit, Face_handle start) const
	outputs the faces and boundary edges of the conflict zone of point `p` to output iterators. More...

template<class OutputItFaces , class OutputItHiddenVertices >
std::pair< OutputItFaces, OutputItHiddenVertices >	get_conflicts_and_hidden_vertices (const Weighted_point &p, OutputItFaces fit, OutputItHiddenVertices vit, Face_handle start) const
	outputs the faces and hidden vertices of the conflict zone of point `p` to output iterators. More...

template<class OutputItBoundaryEdges , class OutputItHiddenVertices >
std::pair < OutputItBoundaryEdges, OutputItHiddenVertices >	get_boundary_of_conflicts_and_hidden_vertices (const Weighted_point &p, OutputItBoundaryEdges eit, OutputItHiddenVertices vit, Face_handle start) const
	outputs the boundary edges and hidden vertices of the conflict zone of point `p` to output iterators. More...

template<class OutputItFaces >
OutputItFaces	get_conflicts (const Point &p, OutputItFaces fit, Face_handle start) const
	outputs the faces of the conflict zone of point `p` to output iterators. More...

template<class OutputItBoundaryEdges >
OutputItBoundaryEdges	get_boundary_of_conflicts (const Point &p, OutputItBoundaryEdges eit, Face_handle start) const
	outputs the boundary edges of the conflict zone of `p` in counterclockwise order where each edge is described through the incident face which is not in conflict with `p`. More...

template<class OutputItHiddenVertices >
OutputItHiddenVertices	get_hidden_vertices (const Point &p, OutputItHiddenVertices vit, Face_handle start) const
	outputs the hidden vertices of the conflict zone of `p` into an output iterator. More...

Vertex_handle	nearest_power_vertex (Bare_point p) const
	Returns the vertex of the triangulation which is nearest to `p` with respect to the power distance. More...

Access Functions
int	number_of_vertices () const
	returns the number of finite vertices that are not hidden.

int	number_of_hidden_vertices () const
	returns the number of hidden vertices.

Hidden_vertices_iterator	hidden_vertices_begin () const
	starts at an arbitrary hidden vertex.

Hidden_vertices_iterator	hidden_vertices_end () const
	past the end iterator for the sequence of hidden vertices.

Finite_vertices_iterator	finite_vertices_begin () const
	starts at an arbitrary unhidden finite vertex

Finite_vertices_iterator	finite_vertices_end () const
	Past-the-end iterator.

All_vertices_iterator	all_vertices_end () const
	starts at an arbitrary unhidden vertex.

All_vertices_iterator	all_vertices_begin () const
	past the end iterator.

Dual Power Diagram
The following member functions provide the elements of the dual power diagram.
Point	weighted_circumcenter (const Face_handle &f) const
	returns the center of the circle orthogonal to the three weighted points corresponding to the vertices of face `f`. More...

Point	dual (const Face_handle &f) const
	same as weighted_circumcenter.

Object	dual (const Edge &e) const
	If both incident faces are finite, returns a segment whose endpoints are the duals of each incident face. More...

Object	dual (const Edge_circulator &ec) const
	Idem.

Object	dual (const Edge_iterator &ei) const
	Idem.

template<class Stream >
Stream &	draw_dual (Stream &ps)
	output the dual power diagram to stream `ps`.

Predicates
Oriented_side	power_test (Face_handle f, const Weighted_point &p) const
	Returns the power test of `p` with respect to the power circle associated with `f`.

Miscellaneous
bool	is_valid (bool verbose=false, int level=0) const
	Tests the validity of the triangulation as a `Triangulation_2` and additionally test the regularity of the triangulation. More...

Additional Inherited Members
Public Types inherited from CGAL::Triangulation_2< Traits, Tds >
enum	Locate_type { VERTEX =0, EDGE, FACE, OUTSIDE_CONVEX_HULL, OUTSIDE_AFFINE_HULL }
	specifies which case occurs when locating a point in the triangulation. More...

typedef Tds::Vertex_handle	Vertex_handle
	handle to a vertex.

typedef Tds::Face_handle	Face_handle
	handle to a face.

typedef Tds::Face_iterator	All_faces_iterator
	iterator over all faces.

typedef Tds::Edge_iterator	All_edges_iterator
	iterator over all edges.

typedef Tds::Vertex_iterator	All_vertices_iterator
	iterator over all vertices.

typedef unspecified_type	Finite_faces_iterator
	iterator over finite faces.

typedef unspecified_type	Finite_edges_iterator
	iterator over finite edges.

typedef unspecified_type	Finite_vertices_iterator
	iterator over finite vertices.

typedef unspecified_type	Point_iterator
	iterator over the points corresponding the finite vertices of the triangulation.

typedef unspecified_type	Line_face_circulator
	circulator over all faces intersected by a line.

typedef unspecified_type	Face_circulator
	circulator over all faces incident to a given vertex.

typedef unspecified_type	Edge_circulator
	circulator over all edges incident to a given vertex.

typedef unspecified_type	Vertex_circulator
	circulator over all vertices incident to a given vertex.

typedef Traits	Geom_traits
	the traits class.

typedef Tds	Triangulation_data_structure
	the triangulation data structure type.

typedef Traits::Point_2	Point
	the point type.

typedef Traits::Segment_2	Segment
	the segment type.

typedef Traits::Triangle_2	Triangle
	the triangle type.

typedef Tds::Vertex	Vertex
	the vertex type.

typedef Tds::Face	Face
	the face type.

typedef Tds::Edge	Edge
	the edge type.

typedef Tds::size_type	size_type
	Size type (an unsigned integral type).

typedef Tds::difference_type	difference_type
	Difference type (a signed integral type).

Public Member Functions inherited from CGAL::Triangulation_2< Traits, Tds >
	Triangulation_2 (const Traits &gt=Traits())
	Introduces an empty triangulation.

	Triangulation_2 (const Triangulation_2 &tr)
	Copy constructor. More...

Triangulation_2	operator= (const Triangulation_2< Traits, Tds > &tr)
	Assignment. More...

void	swap (Triangulation_2 &tr)
	The triangulations `tr` and `*this` are swapped. More...

void	clear ()
	Deletes all faces and finite vertices resulting in an empty triangulation.

int	dimension () const
	Returns the dimension of the convex hull.

size_type	number_of_vertices () const
	Returns the number of finite vertices.

size_type	number_of_faces () const
	Returns the number of finite faces.

Face_handle	infinite_face () const
	a face incident to the infinite vertex.

Vertex_handle	infinite_vertex () const
	the infinite vertex.

Vertex_handle	finite_vertex () const
	a vertex distinct from the infinite vertex.

const Geom_traits &	geom_traits () const
	Returns a const reference to the triangulation traits object.

const TriangulationDataStructure_2 &	tds () const
	Returns a const reference to the triangulation data structure.

TriangulationDataStructure_2 &	tds ()
	Returns a reference to the triangulation data structure.

bool	is_infinite (Vertex_handle v) const
	`true` iff `v` is the infinite vertex.

bool	is_infinite (Face_handle f) const
	`true` iff face `f` is infinite.

bool	is_infinite (Face_handle f, int i) const
	`true` iff edge `(f,i)` is infinite.

bool	is_infinite (Edge e) const
	`true` iff edge `e` is infinite.

bool	is_infinite (Edge_circulator ec) const
	`true` iff edge `*ec` is infinite.

bool	is_infinite (All_edges_iterator ei) const
	`true` iff edge `*ei` is infinite.

bool	is_edge (Vertex_handle va, Vertex_handle vb)
	`true` if there is an edge having `va` and `vb` as vertices.

bool	is_edge (Vertex_handle va, Vertex_handle vb, Face_handle &fr, int &i)
	as above. More...

bool	includes_edge (Vertex_handle va, Vertex_handle vb, Vertex_handle &vbr, Face_handle &fr, int &i)
	`true` if the line segment from `va` to `vb` includes an edge `e` incident to `va`. More...

bool	is_face (Vertex_handle v1, Vertex_handle v2, Vertex_handle v3)
	`true` if there is a face having `v1`, `v2` and `v3` as vertices.

bool	is_face (Vertex_handle v1, Vertex_handle v2, Vertex_handle v3, Face_handle &fr)
	as above. More...

Face_handle	locate (const Point &query, Face_handle f=Face_handle()) const
	If the point `query` lies inside the convex hull of the points, a face that contains the query in its interior or on its boundary is returned. More...

Face_handle	inexact_locate (const Point &query, Face_handle start=Face_handle()) const
	Same as `locate()` but uses inexact predicates. More...

Face_handle	locate (const Point &query, Locate_type &lt, int &li, Face_handle h=Face_handle()) const
	Same as above. More...

Oriented_side	oriented_side (Face_handle f, const Point &p) const
	Returns on which side of the oriented boundary of `f` lies the point `p`. More...

Oriented_side	side_of_oriented_circle (Face_handle f, const Point &p)
	Returns on which side of the circumcircle of face `f` lies the point `p`. More...

void	flip (Face_handle f, int i)
	Exchanges the edge incident to `f` and `f->neighbor(i)` with the other diagonal of the quadrilateral formed by `f` and `f->neighbor(i)`. More...

Vertex_handle	insert (const Point &p, Face_handle f=Face_handle())
	Inserts point `p` in the triangulation and returns the corresponding vertex. More...

Vertex_handle	insert (const Point &p, Locate_type lt, Face_handle loc, int li)
	Same as above except that the location of the point `p` to be inserted is assumed to be given by `(lt,loc,i)` (see the description of the `locate` method above.)

Vertex_handle	push_back (const Point &p)
	Equivalent to `insert(p)`.

template<class InputIterator >
std::ptrdiff_t	insert (InputIterator first, InputIterator last)
	Inserts the points in the range `[first,last)`. More...

void	remove (Vertex_handle v)
	Removes the vertex from the triangulation. More...

Vertex_handle	move_if_no_collision (Vertex_handle v, const Point &p)
	if there is not already another vertex placed on `p`, the triangulation is modified such that the new position of vertex `v` is `p`, and `v` is returned. More...

Vertex_handle	move (Vertex_handle v, const Point &p)
	same as above if there is no collision. More...

Vertex_handle	insert_first (const Point &p)
	Inserts the first finite vertex .

Vertex_handle	insert_second (const Point &p)
	Inserts the second finite vertex .

Vertex_handle	insert_in_face (const Point &p, Face_handle f)
	Inserts vertex `v` in face `f`. More...

Vertex_handle	insert_in_edge (const Point &p, Face_handle f, int i)
	Inserts vertex v in edge `i` of `f`. More...

Vertex_handle	insert_outside_convex_hull (const Point &p, Face_handle f)
	Inserts a point which is outside the convex hull but in the affine hull. More...

Vertex_handle	insert_outside_affine_hull (const Point &p)
	Inserts a point which is outside the affine hull.

void	remove_degree_3 (Vertex_handle v)
	Removes a vertex of degree three. More...

void	remove_second (Vertex_handle v)
	Removes the before last finite vertex.

void	remove_first (Vertex_handle v)
	Removes the last finite vertex.

template<class EdgeIt >
Vertex_handle	star_hole (Point p, EdgeIt edge_begin, EdgeIt edge_end)
	creates a new vertex `v` and use it to star the hole whose boundary is described by the sequence of edges `[edge_begin, edge_end)`. More...

template<class EdgeIt , class FaceIt >
Vertex_handle	star_hole (Point p, EdgeIt edge_begin, EdgeIt edge_end, FaceIt face_begin, FaceIt face_end)
	same as above, except that the algorithm first recycles faces in the sequence `[face_begin, face_end)` and create new ones only when the sequence is exhausted. More...

Finite_vertices_iterator	finite_vertices_begin () const
	Starts at an arbitrary finite vertex.

Finite_vertices_iterator	finite_vertices_end () const
	Past-the-end iterator.

Finite_edges_iterator	finite_edges_begin () const
	Starts at an arbitrary finite edge.

Finite_edges_iterator	finite_edges_end () const
	Past-the-end iterator.

Finite_faces_iterator	finite_faces_begin () const
	Starts at an arbitrary finite face.

Finite_faces_iterator	finite_faces_end () const
	Past-the-end iterator.

Point_iterator	points_begin () const

Point_iterator	points_end () const
	Past-the-end iterator.

All_vertices_iterator	all_vertices_begin () const
	Starts at an arbitrary vertex.

All_vertices_iterator	all_vertices_end () const
	Past-the-end iterator.

All_edges_iterator	all_edges_begin () const
	Starts at an arbitrary edge.

All_edges_iterator	all_edges_end () const
	Past-the-end iterator.

All_faces_iterator	all_faces_begin () const
	Starts at an arbitrary face.

All_faces_iterator	all_faces_end () const
	Past-the-end iterator.

Line_face_circulator	line_walk (const Point &p, const Point &q, Face_handle f=Face_handle()) const
	This function returns a circulator that allows to visit the faces intersected by the line `pq`. More...

Face_circulator	incident_faces (Vertex_handle v) const
	Starts at an arbitrary face incident to `v`.

Face_circulator	incident_faces (Vertex_handle v, Face_handle f) const
	Starts at face `f`. More...

Edge_circulator	incident_edges (Vertex_handle v) const
	Starts at an arbitrary edge incident to `v`.

Edge_circulator	incident_edges (Vertex_handle v, Face_handle f) const
	Starts at the first edge of `f` incident to `v`, in counterclockwise order around `v`. More...

Vertex_circulator	incident_vertices (Vertex_handle v) const
	Starts at an arbitrary vertex incident to `v`.

Vertex_circulator	incident_vertices (Vertex_handle v, Face_handle f)
	Starts at the first vertex of `f` adjacent to `v` in counterclockwise order around `v`. More...

Vertex_handle	mirror_vertex (Face_handle f, int i) const
	returns the vertex of the \( i^{th}\) neighbor of `f` that is opposite to `f`. More...

int	mirror_index (Face_handle f, int i) const
	returns the index of `f` in its \( i^{th}\) neighbor. More...

Edge	mirror_edge (Edge e) const
	returns the same edge seen from the other adjacent face. More...

int	ccw (int i) const
	Returns \( i+1\) modulo 3. More...

int	cw (int i) const
	Returns \( i+2\) modulo 3. More...

Triangle	triangle (Face_handle f) const
	Returns the triangle formed by the three vertices of `f`. More...

Segment	segment (Face_handle f, int i) const
	Returns the line segment formed by the vertices `ccw(i)` and `cw(i)` of face `f`. More...

Segment	segment (const Edge &e) const
	Returns the line segment corresponding to edge `e`. More...

Segment	segment (const Edge_circulator &ec) const
	Returns the line segment corresponding to edge `*ec`. More...

Segment	segment (const Edge_iterator &ei) const
	Returns the line segment corresponding to edge `*ei`. More...

Point	circumcenter (Face_handle f) const
	Compute the circumcenter of the face pointed to by f. More...

void	set_infinite_vertex (const Vertex_handle &v)
	This is an advanced function. More...

bool	is_valid (bool verbose=false, int level=0) const
	Checks the combinatorial validity of the triangulation and also the validity of its geometric embedding. More...

Public Member Functions inherited from CGAL::Triangulation_cw_ccw_2
	Triangulation_cw_ccw_2 ()
	default constructor.

int	ccw (const int i) const
	returns the index of the neighbor or vertex that is next to the neighbor or vertex with index `i` in counterclockwise order around a face.

int	cw (const int i) const
	returns the index of the neighbor or vertex that is next to the neighbor or vertex with index `i` in counterclockwise order around a face.

Related Functions inherited from CGAL::Triangulation_2< Traits, Tds >
ostream &	operator<< (ostream &os, const Triangulation_2< Traits, Tds > &T)
	Inserts the triangulation into the stream `os`. More...

istream &	operator>> (istream &is, const Triangulation_2< Traits, Tds > &T)
	Reads a triangulation from stream `is` and assigns it to the triangulation. More...

Member Function Documentation

template<typename Traits , typename Tds >

Object CGAL::Regular_triangulation_2< Traits, Tds >::dual ( const Edge & e) const

If both incident faces are finite, returns a segment whose endpoints are the duals of each incident face.

If only one incident face is finite, returns a ray whose endpoint is the dual of the finite incident face and supported by the line which is the bisector of the edge's endpoints. If both incident faces are infinite, returns the line which is the bisector of the edge's endpoints otherwise.

template<typename Traits , typename Tds >

template<class OutputItBoundaryEdges >

OutputItBoundaryEdges CGAL::Regular_triangulation_2< Traits, Tds >::get_boundary_of_conflicts	(	const Point &	p,
		OutputItBoundaryEdges	eit,
		Face_handle	start
	)		const

outputs the boundary edges of the conflict zone of p in counterclockwise order where each edge is described through the incident face which is not in conflict with p.

The function returns the resulting output iterator.

template<typename Traits , typename Tds >

template<class OutputItBoundaryEdges , class OutputItHiddenVertices >

std::pair<OutputItBoundaryEdges,OutputItHiddenVertices> CGAL::Regular_triangulation_2< Traits, Tds >::get_boundary_of_conflicts_and_hidden_vertices	(	const Weighted_point &	p,
		OutputItBoundaryEdges	eit,
		OutputItHiddenVertices	vit,
		Face_handle	start
	)		const

outputs the boundary edges and hidden vertices of the conflict zone of point p to output iterators.

See get_conflicts_and_boundary_and_hidden_vertices() for details. The function returns in a std::pair the resulting output iterators.

template<typename Traits , typename Tds >

template<class OutputItFaces >

OutputItFaces CGAL::Regular_triangulation_2< Traits, Tds >::get_conflicts	(	const Point &	p,
		OutputItFaces	fit,
		Face_handle	start
	)		const

outputs the faces of the conflict zone of point p to output iterators.

The function returns the resulting output iterator.

Precondition: dimension()==2.

template<typename Traits , typename Tds >

template<class OutputItFaces , class OutputItBoundaryEdges >

std::pair<OutputItFaces,OutputItBoundaryEdges> CGAL::Regular_triangulation_2< Traits, Tds >::get_conflicts_and_boundary	(	const Weighted_point &	p,
		OutputItFaces	fit,
		OutputItBoundaryEdges	eit,
		Face_handle	start
	)		const

outputs the faces and boundary edges of the conflict zone of point p to output iterators.

See get_conflicts_and_boundary_and_hidden_vertices() for details.

The function returns in a std::pair the resulting output iterators.

Precondition: dimension()==2.

template<typename Traits , typename Tds >

template<class OutputItFaces , class OutputItBoundaryEdges , class OutputItHiddenVertices >

CGAL::Triple<OutputItFaces,OutputItBoundaryEdges,OutputItHiddenVertices> CGAL::Regular_triangulation_2< Traits, Tds >::get_conflicts_and_boundary_and_hidden_vertices	(	const Weighted_point &	p,
		OutputItFaces	fit,
		OutputItBoundaryEdges	eit,
		OutputItHiddenVertices	vit,
		Face_handle	start
	)		const

outputs the faces, boundary edges, and hidden vertices of the conflict zone of point p to output iterators.

Template Parameters

OutputItFaces	is an output iterator with `Face_handle` as value type.
OutputItBoundaryEdges	is an output iterator with `Edge` as value type.
OutputItHiddenVertices	is an output iterator with `Vertex_handle` as value type.

This member function outputs in the container pointed to by fit the faces which are in conflict with point p, i.e., the faces whose power circles have negative power wrt. p. It outputs in the container pointed to by eit the boundary of the zone in conflict with p. It inserts the vertices that would be hidden by p into the container pointed to by vit. The boundary edges of the conflict zone are output in counter-clockwise order and each edge is described through its incident face which is not in conflict with p. The function returns in a CGAL::Triple the resulting output iterators.

Precondition: dimension()==2.

template<typename Traits , typename Tds >

template<class OutputItFaces , class OutputItHiddenVertices >

std::pair<OutputItFaces,OutputItHiddenVertices> CGAL::Regular_triangulation_2< Traits, Tds >::get_conflicts_and_hidden_vertices	(	const Weighted_point &	p,
		OutputItFaces	fit,
		OutputItHiddenVertices	vit,
		Face_handle	start
	)		const

outputs the faces and hidden vertices of the conflict zone of point p to output iterators.

See get_conflicts_and_boundary_and_hidden_vertices() for details. The function returns in a std::pair the resulting output iterators.

Precondition: dimension()==2.

template<typename Traits , typename Tds >

template<class OutputItHiddenVertices >

OutputItHiddenVertices CGAL::Regular_triangulation_2< Traits, Tds >::get_hidden_vertices	(	const Point &	p,
		OutputItHiddenVertices	vit,
		Face_handle	start
	)		const

outputs the hidden vertices of the conflict zone of p into an output iterator.

The function returns the resulting output iterator.

template<typename Traits , typename Tds >

Vertex_handle CGAL::Regular_triangulation_2< Traits, Tds >::insert	(	const Weighted_point &	p,
		Face_handle	f = `Face_handle()`
	)

inserts weighted point p in the regular triangulation.

If the point p does not appear as a vertex of the triangulation, the returned vertex is a hidden vertex. If given the parameter f is used as an hint for the place to start the location process of point p.

template<typename Traits , typename Tds >

Vertex_handle CGAL::Regular_triangulation_2< Traits, Tds >::insert	(	const Weighted_point &	p,
		Locate_type	lt,
		Face_handle	loc,
		int	li
	)

insert a weighted point p whose bare-point is assumed to be located in lt,loc,li.

See the description of member function Triangulation_2::locate().

template<typename Traits , typename Tds >

template<class InputIterator >

std::ptrdiff_t CGAL::Regular_triangulation_2< Traits, Tds >::insert	(	InputIterator	first,
		InputIterator	last
	)

inserts the weighted points in the range [first,last).

It returns the difference of the number of vertices between after and before the insertions (it may be negative due to hidden points). Note that this function is not guaranteed to insert the weighted points following the order of InputIterator, as spatial_sort() is used to improve efficiency.

Template Parameters

InputIterator must be an input iterator with the value type Weighted_point.

template<typename Traits , typename Tds >

template<class WeightedPointWithInfoInputIterator >

std::ptrdiff_t CGAL::Regular_triangulation_2< Traits, Tds >::insert	(	WeightedPointWithInfoInputIterator	first,
		WeightedPointWithInfoInputIterator	last
	)

inserts the weighted points in the range [first,last).

It returns the difference of the number of vertices between after and before the insertions (it may be negative due to hidden points). Note that this function is not guaranteed to insert the weighted points following the order of WeightedPointWithInfoInputIterator, as spatial_sort is used to improve efficiency. Given a pair (p,i), the vertex v storing p also stores i, that is v.point() == p and v.info() == i. If several pairs have the same point, only one vertex is created, one of the objects of type Vertex::Info will be stored in the vertex.

Precondition: Vertex must be model of the concept TriangulationVertexBaseWithInfo_2.

Template Parameters

WeightedPointWithInfoInputIterator must be an input iterator with value type std::pair<Weighted_point,Vertex::Info>.

template<typename Traits , typename Tds >

bool CGAL::Regular_triangulation_2< Traits, Tds >::is_valid	(	bool	verbose = `false`,
		int	level = `0`
	)		const

Tests the validity of the triangulation as a Triangulation_2 and additionally test the regularity of the triangulation.

This method is useful to debug regular triangulation algorithms implemented by the user.

template<typename Traits , typename Tds >

Vertex_handle CGAL::Regular_triangulation_2< Traits, Tds >::nearest_power_vertex ( Bare_point p) const

Returns the vertex of the triangulation which is nearest to p with respect to the power distance.

This means that the power of the query point p with respect to the weighted point in the nearest vertex is smaller than the power of p with respect to the weighted point in any other vertex. Ties are broken arbitrarily. The default constructed handle is returned if the triangulation is empty.

template<typename Traits , typename Tds >

Point CGAL::Regular_triangulation_2< Traits, Tds >::weighted_circumcenter ( const Face_handle & f) const

returns the center of the circle orthogonal to the three weighted points corresponding to the vertices of face f.

Precondition: f is not infinite.

Inherits from

Definition

Types

Creation

Insertion and Removal

Queries

Access Functions

Dual Power Diagram

Predicates

Miscellaneous

Additional Inherited Members

Member Function Documentation