CGAL 4.12  3D Fast Intersection and Distance Computation (AABB Tree)

The AABB tree component offers a static data structure and algorithms to perform efficient intersection and distance queries against sets of finite 3D geometric objects. The set of geometric objects stored in the data structure can be queried for intersection detection, intersection computation and distance. The intersection queries can be of any type, provided that the corresponding intersection predicates and constructors are implemented in the traits class. The distance queries are limited to point queries. Examples of intersection queries include line objects (rays, lines, segments) against sets of triangles, or plane objects (planes, triangles) against sets of segments. An example of a distance query consists of finding the closest point from a point query to a set of triangles.
Note that this component is not suited to the problem of finding all intersecting pairs of objects. We refer to the component Intersecting Sequences of dD Isooriented Boxes which can find all intersecting pairs of isooriented boxes.
The AABB tree data structure takes as input an iterator range of geometric data, which is then converted into primitives. From these primitives a hierarchy of axisaligned bounding boxes (AABBs) is constructed and used to speed up intersection and distance queries. Each primitive gives access to both one input geometric object (socalled datum) and one reference id to this object. A typical example primitive wraps a 3D triangle as datum and a face handle of a polyhedral surface as id. Each intersection query can return the intersection objects (e.g., 3D points or segments for ray queries) as well as the id (here the face handle) of the intersected primitives. Similarly, each distance query can return the closest point from the point query as well as the id of the closest primitive.
The main entry point to the component is the class AABB_tree
which represents a static AABB tree constructed from an iterator range of geometric data. Once instantiated an AABB tree can be queried for intersection and distance queries.
Intersections. Assume for example that the tree contains triangle primitives. The tree can be queried for intersection against line objects (rays, segments or line) in various ways. We distinguish intersection tests which do not construct any intersection objects, from intersections which construct the intersection objects.
Tests:
AABB_tree::do_intersect()
tests if the input primitives are intersected by the query. This function is fast as it involves only predicates and stops after the first encountered intersection.AABB_tree::number_of_intersected_primitives()
counts all intersected primitives.AABB_tree::all_intersected_primitives()
enumerates all intersected primitives ids without constructing the corresponding intersection objects.AABB_tree::any_intersected_primitive()
returns the first encountered intersecting primitive id (if any) without constructing the corresponding intersection object, and stops after the first encountered intersection. Note that the traversal order of the tree is such that first herein does not refer to any particular ordering of the intersections with respect to the query.AABB_tree::first_intersected_primitive()
returns the intersecting primitive id (if any) of the corresponding intersection object that is closest to the source of the ray.Constructions:
AABB_tree::all_intersections()
detects and constructs all intersection objects with the input primitives.AABB_tree::any_intersection()
detects and constructs the first encountered intersection and constructs the corresponding object. This function is fast as it stops after the first encountered intersection.AABB_tree::first_intersection()
detects and constructs the intersection object that is closest to the source of the ray.Distance. An AABB tree computes the closest point from a given point query to the input primitives through the function AABB_tree::closest_point()
. In addition, it can compute the id of the closest primitive from a given point query through the function AABB_tree::closest_point_and_primitive()
, i.e., the id of the primitive which realizes the minimum distance from the point query. The AABB tree uses a secondary search structure to speed up the distance queries. The construction of this secondary structure should be requested by the user by a call to AABB_tree::accelerate_distance_queries()
before the first the distance computation. This data structure is not generated by default because it is used only for distance computations.
CGAL::AABB_traits
with a Kernel from CGAL, having degenerate triangles or segments in the AABBtree will results in an undefined behavior or a crash.In the following example a set of 3D triangles is stored in a list. The AABB primitive wraps a triangle as datum
and an iterator in the list as id
. We compute the number of input triangles intersected by a ray query, as well as the closest point and the squared distance from a point query.
File AABB_tree/AABB_triangle_3_example.cpp
In the following example the AABB primitive wraps a facet handle of a triangle polyhedral surface as id
and the corresponding 3D triangle as geometric object. From a segment query we test the intersections, then compute the number of intersections, compute the first encountered intersection (generally a point), compute all intersections (where each intersection is a pair of one CGAL object and one primitive id  here a face handle) and compute all intersected primitives. The latter involves only tests and no predicates and is hence faster than computing all intersections. We also compute the first encountered intersection with a plane query, which is generally a segment. We finally compute the first intersection along a ray.
File AABB_tree/AABB_polyhedron_facet_intersection_example.cpp
In the following example we load a closed polyhedral surface and perform a ray shooting query from the centroid of each face, orthogonally to the face towards the interior. As the centroid is computed with floating point arithmetic the first face hit by the ray may be the face of the centroid. The skip functor takes care of ignoring the face.
File AABB_tree/AABB_ray_shooting_example.cpp
In the following example the AABB primitive wraps a facet handle of a triangle polyhedral surface as id
and the corresponding 3D triangle as geometric object. From a point query we compute the squared distance, the closest point as well as the closest point and primitive id. The latter returns a pair composed of a point and a face handle.
File AABB_tree/AABB_polyhedron_facet_distance_example.cpp
In the following example the segments are stored into a list, and the AABB primitive wraps a segment as datum
and an iterator in the list as id
. We compute the number of intersections with plane and triangles queries, and the closest point from a point query.
File AABB_tree/AABB_segment_3_example.cpp
In the following example the AABB primitive wraps a halfedge handle as id
and generates a 3D segment on the fly, each time its method datum
is called. We compute the number of intersections with a triangle query and the closest point from a point query.
File AABB_tree/AABB_polyhedron_edge_example.cpp
The AABB tree is a static data structure, but it allows to insert primitives, and will internally rebuild triggered by the first query, or because the user calls the AABB_tree::build()
method. The following example illustrates this for two polyhedral surfaces.
File AABB_tree/AABB_insertion_example.cpp
The AABB tree example folder contains three examples of trees constructed with customize primitives. In AABB_custom_example.cpp the primitive contains triangles which are defined by three pointers to custom points. In AABB_custom_triangle_soup_example.cpp all input triangles are stored into a single array so as to form a triangle soup. The primitive internally uses a boost::iterator_adaptor
so as to provide the three functions AABBPrimitive::id()
, AABBPrimitive::datum()
, and AABBPrimitive::reference_point()
) required by the primitive concept. In AABB_custom_indexed_triangle_set_example.cpp the input is an indexed triangle set stored through two arrays: one array of points and one array of indices which refer to the point array. Here also the primitive internally uses a boost::iterator_adaptor
.
We provide some performance numbers for the case where the AABB tree contains a set of polyhedron triangle facets. We measure the tree construction time, the memory occupancy and the number of queries per second for a variety of intersection and distance queries. The machine used is a PC running Windows XP64 with an Intel CPU Core2 Extreme clocked at 3.06 GHz with 4GB of RAM. By default the kernel used is Simple_cartesian<double>
(the fastest in our experiments). The program has been compiled with Visual C++ 2005 compiler with the O2 option which maximizes speed.
The surface triangle mesh chosen for benchmarking the tree construction is the knot model (14,400 triangles) depicted by Figure 80.2. We measure the tree construction time (both AABB tree alone and AABB tree with internal KDtree) for this model as well as for three denser versions subdivided through the Loop subdivision scheme which multiplies the number of triangles by four.
Number of triangles  Construction (in ms)  Construction with internal KDtree (in ms) 

14,400  156  157 
57,600  328  328 
230,400  1,141  1,437 
921,600  4,813  5,953 
When using the polyhedron triangle facet primitive (defined in AABB_polyhedron_triangle_primitive.h
) the AABB tree occupies approximately 61 bytes per primitive (without constructing the internal KDtree). It increases to approximately 150 bytes per primitive when constructing the internal KDtree with one reference point per primitive (the default mode when calling the function AABB_tree::accelerate_distance_queries()
). Note that the polyhedron facet primitive primitive stores only one facet handle as primitive id and computes on the fly a 3D triangle from the facet handle stored internally. When explicitly storing a 3D triangle in the primitive the tree occupies approximately 140 bytes per primitive instead of 60 (without constructing the internal KDtree).
The following table provides orders of memory occupancy in MBytes for an increasing number of triangles. As the internal KDtree used to accelerate the distance queries dominates the memory occupancy, we recommend to specify for large models a lower number of reference point (evenly distributed) to construct the internal KDtree through the function AABB_tree::accelerate_distance_queries()
which takes an iterator range as input.
Number of triangles  AABB tree (in MBytes)  AABB tree with internal KDtree (in MBytes) 

18,400  1.10  2.76 
102,400  6.33  14.73 
1,022,400  59.56  151.31 
1,822,400  108.34  291.84 
The following table measures the number of intersection queries per second on the 14,400 triangle version of the knot mesh model for ray, line, segment and plane queries. Each ray query is generated by choosing a random source point within the mesh bounding box and a random vector. A line or segment query is generated by choosing two random points inside the bounding box. A plane query is generated by picking a random point inside the bounding box and a random normal vector. Note that a plane query generally intersects many triangles of the input surface mesh. This explains the low performance numbers for the intersection functions which enumerate all intersections.
Function  Segment  Ray  Line  Plane 

AABB_tree::do_intersect()  187,868  185,649  206,096  377,969 
AABB_tree::any_intersected_primitive()  190,684  190,027  208,941  360,337 
AABB_tree::any_intersection()  147,468  143,230  148,235  229,336 
AABB_tree::number_of_intersected_primitives()  64,389  52,943  54,559  7,906 
AABB_tree::all_intersected_primitives()  65,553  54,838  53,183  5,693 
AABB_tree::all_intersections()  46,507  38,471  36,374  2,644 
Curve of Figure 80.2 plots the number of queries per second (here the AABB_tree::all_intersections()
function with random segment queries) against the number of input triangles for the knot triangle surface mesh.
The following table measures the number of AABB_tree::all_intersections()
queries per second against several kernels. We use the 14,400 triangle version of the knot mesh model for random segment queries. Note how the Simple_cartesian
kernel is substantially faster than the Cartesian
kernel.
Kernel  Queries/s (all_intersections() with segment queries) 

Simple_cartesian<double>  46,507 
Simple_cartesian<float>  43,187 
Cartesian<double>  5,335 
Cartesian<float>  5,522 
Exact_predicates_inexact_constructions_kernel  18,411 
The surface triangle mesh chosen for benchmarking distances is again the knot model in four increasing resolutions obtained through Loop subdivision. In the following table we first measure the tree construction time (which includes the construction of the internal KDtree data structure used to accelerate the distance queries by up to one order of magnitude in our experiments). We then measure the number of queries per second for the three types distance queries (AABB_tree::closest_point()
, AABB_tree::squared_distance()
and AABB_tree::closest_point_and_primitive()
) from point queries randomly chosen inside the bounding box.
Nb triangles  Construction (ms)  Closest_point()  Squared_distance()  Closest_point_and_primitive() 

14,400  157.000  45,132  45,626  45,770 
57,600  328.000  21,589  21,312  21,137 
230,400  1.437  11,063  10,962  11,086 
921,600  5.953  5,636  5,722  5,703 
The experiments described above are neither exhaustive nor conclusive as we have chosen one specific case where the input primitives are the facets of a triangle surface polyhedron. Nevertheless we now provide some general observations and advices about how to put the AABB tree to use with satisfactory performances. While the tree construction times and memory occupancy do not fluctuate much in our experiments depending on the input surface triangle mesh, the performance expressed in number of queries varies greatly depending on a complex combination of criteria: type of kernel, number of input primitives, distribution of primitives in space, type of function queried, type of query and location of query in space.
Simple_cartesian
kernel parameterized with the double precision number type. In applications where the intersection and distance execution times are crucial it is possible to use this kernel for the AABB tree in combination with a more robust kernel for the main data structure.AABB_tree::do_intersect()
, AABB_tree::number_of_intersected_primitives()
, AABB_tree::any_intersected_primitive()
, AABB_tree::all_intersected_primitives()
) are faster than the ones which explicitly construct the intersections (AABB_tree::any_intersection()
and AABB_tree::all_intersections()
).AABB_tree::accelerate_distance_queries()
, it is preferable to specify a query point already close to the surface triangle mesh so that the query traverses only few AABBs of the tree. For a large number of primitive data (greater than 2M faces in our experiments) however we noticed that it is not necessary (and sometimes even slower) to use all reference points when constructing the KDtree. In these cases we recommend to specify trough the function AABB_tree::accelerate_distance_queries()
fewer reference points (typically not more than 100K) evenly distributed over the input primitives.The AABB tree construction is initialized by computing the AABB of the whole set of input primitives. All primitives are then sorted along the longest coordinate axis of this box, and the primitives are separated into two equal size sets. This procedure is applied recursively until an AABB contains a single primitive. The tree is leafless as presented in OPCODE
[1]. An intersection query traverses the tree by computing intersection tests only with respect to the AABBs during traversal, and with respect to the input primitives at the end of traversal (in the leafs of the tree).
The reference id is not used internally but simply used by the AABB tree to refer to the primitive in the results provided to the user. It follows that, while in most cases each reference id corresponds to a unique primitive, this is not a requirement of the component. This way a user may use these reference ids as labels, each of them being shared by several geometric objects.
A distance query between a query point q
and the input primitives is turned into a ball query centered at q
. The ball traverses the tree while recursively querying intersections with the AABBs, and computes the closest point p
from the query point to the input primitives at the leafs of the tree. The ball radius is then shrunk to the distance between p
and q
for all remaining recursive traversals of the tree. Efficiency is achieved through setting the initial ball radius to a small value still guaranteed to intersect the input primitives. This is achieved by constructing through the function AABB_tree::accelerate_distance_queries()
an internal secondary data structure which provides a good hint to the algorithm at the beginning of the traversal.
Camille Wormser and Pierre Alliez started working on a data structure for efficient collision detection in 2007. The generic design for implementing both intersection and distance queries, and for generic queries and primitives was developed by Camille Wormser. In 2009, Pierre Alliez, Stéphane Tayeb and Camille Wormser made the implementation CGALcompliant, with the help of Laurent Rineau for optimizing the tree construction. The authors wish to thank Andreas Fabri, Jane Tournois, Mariette Yvinec and Sylvain Lefèbvre for helpful comments and discussions.