#include <CGAL/Periodic_3_triangulation_3.h>

Definition

The class Periodic_triangulation_3 represents a 3-dimensional triangulation of a point set in \( \mathbb T_c^3\).

Template Parameters

PT	must be a model of the `Periodic_3DelaunayTriangulationTraits_3` concept.
TDS	must be a model of `TriangulationDataStructure_3` concept with some additional functionality in cells and vertices. Its default value is `Triangulation_data_structure_3<Triangulation_vertex_base_3<PT,Periodic_3_triangulation_ds_vertex_base_3<>>,Triangulation_cell_base_3<PT,Periodic_3_triangulation_ds_cell_base_3<>>>`.

See Also: Periodic_3_Delaunay_triangulation_3

Related Functions
(Note that these are not member functions.)
istream &	operator>> (istream &is, Periodic_3_triangulation_3 &t)
	Reads a triangulation from `is` and stores it in `t`. More...

ostream &	operator<< (ostream &os, const Periodic_3_triangulation_3 &t)
	Writes the triangulation `t` into `os`. More...

Types
typedef PT	Geometric_traits

typedef TDS	Triangulation_data_structure

typedef Geometric_traits::Periodic_3_offset_3	Offset

typedef Geometric_traits::Iso_cuboid_3	Iso_cuboid
	A type representing an axis-aligned cuboid. More...

typedef array< int, 3 >	Covering_sheets
	Integer triple to store the number of sheets in each direction of space.

typedef Geometric_traits::Point_3	Point

typedef Geometric_traits::Segment_3	Segment

typedef Geometric_traits::Triangle_3	Triangle

typedef Geometric_traits::Tetrahedron_3	Tetrahedron

typedef std::pair< Point, Offset >	Periodic_point
	Represents a point-offset pair. More...

typedef array< Periodic_point, 2 >	Periodic_segment

typedef array< Periodic_point, 3 >	Periodic_triangle

typedef array< Periodic_point, 4 >	Periodic_tetrahedron

Only vertices ( \( 0\)-faces) and cells ( \( 3\)-faces) are stored. Edges ( \( 1\)-faces) and facets ( \( 2\)-faces) are not explicitly represented and thus there are no corresponding classes (see Section Representation).
typedef Triangulation_data_structure::Vertex	Vertex

typedef Triangulation_data_structure::Cell	Cell

typedef Triangulation_data_structure::Edge	Edge

typedef Triangulation_data_structure::Facet	Facet

The vertices and faces of the triangulations are accessed through `handles`, `iterators` and `circulators`. A handle is a type which supports the two dereference operators and `operator->`. The Handle concept is documented in the support library. Iterators and circulators are bidirectional and non-mutable. The edges and facets of the triangulation can also be visited through iterators and circulators which are bidirectional and non-mutable. Iterators and circulators are convertible to the corresponding handles, thus the user can pass them directly as arguments to the functions.
typedef Triangulation_data_structure::Vertex_handle	Vertex_handle
	handle to a vertex

typedef Triangulation_data_structure::Cell_handle	Cell_handle
	handle to a cell

typedef Triangulation_data_structure::size_type	size_type
	Size type (an unsigned integral type)

typedef Triangulation_data_structure::difference_type	difference_type
	Difference type (a signed integral type)

typedef Triangulation_data_structure::Cell_iterator	Cell_iterator
	iterator over cells

typedef Triangulation_data_structure::Facet_iterator	Facet_iterator
	iterator over facets

typedef Triangulation_data_structure::Edge_iterator	Edge_iterator
	iterator over edges

typedef Triangulation_data_structure::Vertex_iterator	Vertex_iterator
	iterator over vertices

typedef unspecified_type	Unique_vertex_iterator
	iterator over the vertices whose corresponding points lie in the original domain, i.e. for each set of periodic copies the `Unique_vertex_iterator` iterates over exactly one representative.

typedef Triangulation_data_structure::Cell_circulator	Cell_circulator
	circulator over all cells incident to a given edge

typedef Triangulation_data_structure::Facet_circulator	Facet_circulator
	circulator over all facets incident to a given edge

Geometric Iterators:
typedef unspecified_type	Periodic_tetrahedron_iterator
	iterator over the tetrahedra corresponding to cells of the triangulation.

typedef unspecified_type	Periodic_triangle_iterator
	iterator over the triangles corresponding to facets of the triangulation.

typedef unspecified_type	Periodic_segment_iterator
	iterator over the segments corresponding to edges of the triangulation.

typedef unspecified_type	Periodic_point_iterator
	iterator over the points corresponding to vertices of the triangulation.

Enums
enum	Locate_type { VERTEX =0, EDGE, FACET, CELL, EMPTY }
	The enum `Locate_type` is defined by `Periodic_3_triangulation_3` to specify which case occurs when locating a point in the triangulation. More...

enum	Iterator_type { STORED =0, UNIQUE, STORED_COVER_DOMAIN, UNIQUE_COVER_DOMAIN }
	The enum `Iterator_type` is defined by `Periodic_3_triangulation_3` to specify the behavior of geometric iterators. More...

Creation
	Periodic_3_triangulation_3 (const Iso_cuboid &domain=Iso_cuboid(0, 0, 0, 1, 1, 1), const Geometric_traits &traits=Geometric_traits())
	Introduces an empty triangulation `t` with `domain` as original domain. More...

	Periodic_3_triangulation_3 (const Periodic_3_triangulation_3 &tr)
	Copy constructor. More...

Assignment
Periodic_3_triangulation_3 &	operator= (const Periodic_3_triangulation_3 &tr)
	The triangulation `tr` is duplicated, and modifying the copy after the duplication does not modify the original. More...

void	swap (Periodic_3_triangulation_3 &tr)
	The triangulations `tr` and `t` are swapped. More...

void	clear ()
	Deletes all vertices and all cells of `t`.

template<class PT , class TDS1 , class TDS2 >
bool	operator== (const Periodic_3_triangulation_3< PT, TDS1 > &t1, const Periodic_3_triangulation_3< PT, TDS2 > &t2)
	Equality operator. More...

template<class PT , class TDS1 , class TDS2 >
bool	operator!= (const Periodic_3_triangulation_3< PT, TDS1 > &t1, const Periodic_3_triangulation_3< PT, TDS2 > &t2)
	The opposite of `operator==`.

Access Functions
const Geometric_traits &	geom_traits () const
	Returns a const reference to the geometric traits object.

const Triangulation_data_structure &	tds () const
	Returns a const reference to the triangulation data structure.

Iso_cuboid	domain () const
	Returns the original domain.

Covering_sheets	number_of_sheets () const
	This is an advanced function. More...

Non const access
void	set_domain (const Iso_cuboid dom)
	This is an advanced function. More...

Triangulation_data_structure &	tds ()
	This is an advanced function. More...

Non-constant-time queries and conversions
bool	is_extensible_triangulation_in_1_sheet_h1 () const
	The current triangulation remains a triangulation in the 1-sheeted covering space even after adding points if this method returns `true`. More...

bool	is_extensible_triangulation_in_1_sheet_h2 () const
	The same as `is_extensible_triangulation_in_1_sheet_h1()` but with a more precise heuristic, i.e. it might answer `true` in cases in which `is_extensible_triangulation_in_1_sheet_h1()` would not. More...

bool	is_triangulation_in_1_sheet () const
	Returns `true` if the current triangulation would still be a triangulation in the 1-sheeted covering space, returns `false` otherwise.

void	convert_to_1_sheeted_covering () const
	Converts the current triangulation into the same periodic triangulation in the 1-sheeted covering space. More...

void	convert_to_27_sheeted_covering () const
	Converts the current triangulation into the same periodic triangulation in the 27-sheeted covering space. More...

size_type	number_of_vertices () const
	Returns the number of vertices. More...

size_type	number_of_cells () const
	Returns the number of cells. More...

size_type	number_of_stored_vertices () const
	Returns the number of vertices in the data structure. More...

size_type	number_of_stored_cells () const
	Returns the number of cells in the data structure. More...

Non-constant-time access functions
size_type	number_of_edges () const
	Returns the number of edges. More...

size_type	number_of_facets () const
	Returns the number of facets. More...

size_type	number_of_stored_edges () const
	Returns the number of edges in the data structure. More...

size_type	number_of_stored_facets () const
	Returns the number of facets in the data structure. More...

Geometric Access Functions
Periodic_point	periodic_point (const Vertex_handle v) const
	Returns the periodic point given by vertex `v`. More...

Periodic_point	periodic_point (const Cell_handle c, int i) const
	If `t` is represented in the 1-sheeted covering space, this function returns the periodic point given by the \( i\)-th vertex of cell `c`, that is the point in the original domain and the offset of the vertex in `c`. More...

Periodic_segment	periodic_segment (const Cell_handle c, int i, int j) const
	Returns the periodic segment formed by the two point-offset pairs corresponding to the two vertices of edge `(c,i,j)`. More...

Periodic_segment	periodic_segment (const Edge &e) const
	Same as the previous method for edge `e`.

Periodic_triangle	periodic_triangle (const Cell_handle c, int i) const
	Returns the periodic triangle formed by the three point-offset pairs corresponding to the three vertices of facet `(c,i)`. More...

Periodic_triangle	periodic_triangle (const Facet &f) const
	Same as the previous method for facet `f`.

Periodic_tetrahedron	periodic_tetrahedron (const Cell_handle c) const
	Returns the periodic tetrahedron formed by the four point-offset pairs corresponding to the four vertices of `c`.

Note that a traits class providing exact constructions should be used in order to guarantee the following operations to be exact (as opposed to computing the triangulation only, which requires only exact predicates).
Point	point (const Periodic_point &p) const
	Converts the `Periodic_point` `s` (point-offset pair) to the corresponding `Point` in \( \mathbb R^3\).

Segment	segment (const Periodic_segment &s) const
	Converts the `Periodic_segment` `s` to a `Segment`.

Triangle	triangle (const Periodic_triangle &t) const
	Converts the `Periodic_triangle` `t` to a `Triangle`.

Tetrahedron	tetrahedron (const Periodic_tetrahedron &t) const
	Converts the `Periodic_tetrahedron` `t` to a `Tetrahedron`.

Queries
bool	is_vertex (const Point &p, Vertex_handle &v) const
	Tests whether `p` is a vertex of `t` by locating `p` in the triangulation. More...

bool	is_vertex (Vertex_handle v) const
	Tests whether `v` is a vertex of `t`.

bool	is_edge (Vertex_handle u, Vertex_handle v, Cell_handle &c, int &i, int &j) const
	Tests whether `(u,v)` is an edge of `t`. More...

bool	is_edge (Vertex_handle u, const Offset &offu, Vertex_handle v, const Offset &offv, Cell_handle &c, int &i, int &j) const
	Tests whether `((u,offu),(v,offu))` is an edge of `t`. More...

bool	is_facet (Vertex_handle u, Vertex_handle v, Vertex_handle w, Cell_handle &c, int &i, int &j, int &k) const
	Tests whether `(u,v,w)` is a facet of `t`. More...

bool	is_facet (Vertex_handle u, const Offset &offu, Vertex_handle v, const Offset &offv, Vertex_handle w, const Offset &offw, Cell_handle &c, int &i, int &j, int &k) const
	Tests whether `((u,offu),(v,offv),(w,offw))` is a facet of `t`. More...

bool	is_cell (Cell_handle c) const
	Tests whether `c` is a cell of `t`.

bool	is_cell (Vertex_handle u, Vertex_handle v, Vertex_handle w, Vertex_handle x, Cell_handle &c, int &i, int &j, int &k, int &l) const
	Tests whether `(u,v,w,x)` is a cell of `t`. More...

bool	is_cell (Vertex_handle u, Vertex_handle v, Vertex_handle w, Vertex_handle x, Cell_handle &c) const
	Tests whether `(u,v,w,x)` is a cell of `t` and computes this cell `c`. More...

bool	is_cell (Vertex_handle u, const Offset &offu, Vertex_handle v, const Offset &offv, Vertex_handle w, const Offset &offw, Vertex_handle x, const Offset &offx, Cell_handle &c, int &i, int &j, int &k, int &l) const
	Tests whether `((u,offu),(v,offv),(w,offv),(x,offx))` is a cell of `t`. More...

bool	is_cell (Vertex_handle u, const Offset &offu, Vertex_handle v, const Offset &offv, Vertex_handle w, const Offset &offw, Vertex_handle x, const Offset &offx, Cell_handle &c) const
	Tests whether `((u,offu),(v,offv),(w,offv),(x,offx))` is a cell of `t` and computes this cell `c`. More...

There is a method `has_vertex` in the cell class. The analogous methods for facets are defined here.
bool	has_vertex (const Facet &f, Vertex_handle v, int &j) const
	If `v` is a vertex of `f`, then `j` is the index of `v` in the cell `f.first`, and the method returns `true`.

bool	has_vertex (Cell_handle c, int i, Vertex_handle v, int &j) const
	Same for facet `(c,i)`. More...

bool	has_vertex (const Facet &f, Vertex_handle v) const

bool	has_vertex (Cell_handle c, int i, Vertex_handle v) const
	Same as the first two methods, but these two methods do not return the index of the vertex.

The following three methods test whether two facets have the same vertices.
bool	are_equal (Cell_handle c, int i, Cell_handle n, int j) const

bool	are_equal (const Facet &f, const Facet &g) const

bool	are_equal (const Facet &f, Cell_handle n, int j) const

Point Location
The class `Periodic_3_triangulation_3` provides three functions to locate a given point with respect to a triangulation. It provides also functions to test if a given point is inside a face or not. Note that the class `Periodic_3_Delaunay_triangulation_3` also provides a `nearest_vertex()` function.
Cell_handle	locate (const Point &query, Cell_handle start=Cell_handle()) const
	Returns the cell that contains the query in its interior. More...

Cell_handle	locate (const Point &query, Locate_type &lt, int &li, int &lj, Cell_handle start=Cell_handle()) const
	The \( k\)-face that contains `query` in its interior is returned, by means of the cell returned together with `lt`, which is set to the locate type of the query (`VERTEX, EDGE, FACET, CELL`) and two indices `li` and `lj` that specify the \( k\)-face of the cell containing `query`. More...

Bounded_side	side_of_cell (const Point &p, Cell_handle c, Locate_type &lt, int &li, int &lj) const
	Returns a value indicating on which side of the oriented boundary of `c` the point `p` lies. More...

Cell, Face, Edge and Vertex Iterators
The following iterators allow the user to visit cells, facets, edges and vertices of the stored triangulation, i.e. in case of computing in a multiply sheeted covering space all stored periodic copies of each item are returned. These iterators are non-mutable, bidirectional and their value types are respectively `Cell`, `Facet`, `Edge` and `Vertex`. They are all invalidated by any change in the triangulation.
Vertex_iterator	vertices_begin () const
	Starts at an arbitrary vertex. More...

Vertex_iterator	vertices_end () const
	Past-the-end iterator.

Edge_iterator	edges_begin () const
	Starts at an arbitrary edge. More...

Edge_iterator	edges_end () const
	Past-the-end iterator.

Facet_iterator	facets_begin () const
	Starts at an arbitrary facet. More...

Facet_iterator	facets_end () const
	Past-the-end iterator.

Cell_iterator	cells_begin () const
	Starts at an arbitrary cell. More...

Cell_iterator	cells_end () const
	Past-the-end iterator.

Unique_vertex_iterator	unique_vertices_begin () const
	Starts at an arbitrary vertex. More...

Unique_vertex_iterator	unique_vertices_end () const
	Past-the-end iterator.

Geometric Iterators
The following iterators allow the user to obtain geometric primitives corresponding to cells, facets, edges, and vertices of the triangulation. These iterators are non-mutable, bidirectional and their value types are respectively `Periodic_point`, `Periodic_segment`, `Periodic_triangle`, and `Periodic_tetrahedron`. They are all invalidated by any change in the triangulation. If the periodic triangulation is not computed in the 1-sheeted covering space, these iterators can be used to retain only the geometric primitives in the original domain. This can be controlled using the enum `Iterator_type`. The four different modes of the geometric iterators: STORED, STORED_COVER_DOMAIN, UNIQUE, UNIQUE_COVER_DOMAIN. Note that in case of computing in the 1-sheeted covering space, STORED and UNIQUE give the same result.
Periodic_point_iterator	periodic_points_begin (Iterator_type it=STORED) const
	Iterates over the points of the triangulation. More...

Periodic_point_iterator	periodic_points_end (Iterator_type it=STORED) const
	Past-the-end iterator. More...

Periodic_segment_iterator	periodic_segments_begin (Iterator_type it=STORED) const
	Iterates over the segments of the triangulation. More...

Periodic_segment_iterator	periodic_segments_end (Iterator_type it=STORED) const
	Past-the-end iterator. More...

Periodic_triangle_iterator	periodic_triangles_begin (Iterator_type it=STORED) const
	Iterates over the triangles of the triangulation. More...

Periodic_triangle_iterator	periodic_triangles_end (Iterator_type it=STORED) const
	Past-the-end iterator. More...

Periodic_tetrahedron_iterator	periodic_tetrahedra_begin (Iterator_type it=STORED) const
	Iterates over the tetrahedra of the triangulation. More...

Periodic_tetrahedron_iterator	periodic_tetrahedra_end (Iterator_type it=STORED) const
	Past-the-end iterator. More...

Cell and Facet Circulators
The following circulators respectively visit all cells or all facets incident to a given edge. They are non-mutable and bidirectional. They are invalidated by any modification of one of the cells traversed.
Cell_circulator	incident_cells (Edge e) const
	Starts at an arbitrary cell incident to `e`.

Cell_circulator	incident_cells (Cell_handle c, int i, int j) const
	As above for edge `(i,j)` of `c`.

Cell_circulator	incident_cells (Edge e, Cell_handle start) const
	Starts at cell `start`. More...

Cell_circulator	incident_cells (Cell_handle c, int i, int j, Cell_handle start) const
	As above for edge `(i,j)` of `c`.

Facet_circulator	incident_facets (Edge e) const
	Starts at an arbitrary facet incident to `e`.

Facet_circulator	incident_facets (Cell_handle c, int i, int j) const
	As above for edge `(i,j)` of `c`.

Facet_circulator	incident_facets (Edge e, Facet start) const
	Starts at facet `start`. More...

Facet_circulator	incident_facets (Edge e, Cell_handle start, int f) const
	Starts at facet of index `f` in `start`.

Facet_circulator	incident_facets (Cell_handle c, int i, int j, Facet start) const
	As above for edge `(i,j)` of `c`.

Facet_circulator	incident_facets (Cell_handle c, int i, int j, Cell_handle start, int f) const
	As above for edge `(i,j)` of `c` and facet `(start,f)`.

Traversal of the Incident Cells and Facets, and the Adjacent Vertices of a Given Vertex
template<class OutputIterator >
OutputIterator	incident_cells (Vertex_handle v, OutputIterator cells) const
	Copies the `Cell_handle`s of all cells incident to `v` to the output iterator `cells`. More...

template<class OutputIterator >
OutputIterator	incident_facets (Vertex_handle v, OutputIterator facets) const
	Copies the `Facet`s incident to `v` to the output iterator `facets`. More...

template<class OutputIterator >
OutputIterator	incident_edges (Vertex_handle v, OutputIterator edges) const
	Copies the `Edge`s incident to `v` to the output iterator `edges`. More...

template<class OutputIterator >
OutputIterator	adjacent_vertices (Vertex_handle v, OutputIterator vertices) const
	Copies the `Vertex_handle`s of all vertices adjacent to `v` to the output iterator `vertices`. More...

size_type	degree (Vertex_handle v) const
	Returns the degree of a vertex, that is, the number of adjacent vertices. More...

Traversal Between Adjacent Cells
int	mirror_index (Cell_handle c, int i) const
	Returns the index of `c` in its \( i^{th}\) neighbor. More...

Vertex_handle	mirror_vertex (Cell_handle c, int i) const
	Returns the vertex of the \( i^{th}\) neighbor of `c` that is opposite to `c`. More...

Facet	mirror_facet (Facet f) const
	Returns the same facet viewed from the other adjacent cell.

Checking
Advanced The responsibility of keeping a valid triangulation belongs to the user when using advanced operations allowing a direct manipulation of cells and vertices. We provide the user with the following methods to help debugging.
bool	is_valid (bool verbose=false) const
	Checks the combinatorial validity of the triangulation. More...

bool	is_valid (Cell_handle c, bool verbose=false) const
	Checks the combinatorial validity of the cell by calling the `is_valid` method of the `Triangulation_data_structure` cell class. More...

Member Typedef Documentation

template<typename PT, typename TDS>

typedef Geometric_traits::Iso_cuboid_3 CGAL::Periodic_3_triangulation_3< PT, TDS >::Iso_cuboid

A type representing an axis-aligned cuboid.

It must be a model of PT::Iso_cuboid_3. Used to represent the original domain.

template<typename PT, typename TDS>

typedef std::pair< Point, Offset > CGAL::Periodic_3_triangulation_3< PT, TDS >::Periodic_point

Represents a point-offset pair.

The point in the pair lies in the original domain.

Constructor & Destructor Documentation

template<typename PT, typename TDS>

CGAL::Periodic_3_triangulation_3< PT, TDS >::Periodic_3_triangulation_3	(	const Iso_cuboid &	domain = `Iso_cuboid(0, 0, 0, 1, 1, 1)`,
		const Geometric_traits &	traits = `Geometric_traits()`
	)

Introduces an empty triangulation t with domain as original domain.

Precondition: domain is a cube.

template<typename PT, typename TDS>

CGAL::Periodic_3_triangulation_3< PT, TDS >::Periodic_3_triangulation_3 ( const Periodic_3_triangulation_3< PT, TDS > & tr)

Copy constructor.

All vertices and faces are duplicated.

Member Function Documentation

template<typename PT, typename TDS>

template<class OutputIterator >

OutputIterator CGAL::Periodic_3_triangulation_3< PT, TDS >::adjacent_vertices	(	Vertex_handle	v,
		OutputIterator	vertices
	)		const

Copies the Vertex_handles of all vertices adjacent to v to the output iterator vertices.

Returns the resulting output iterator.

Precondition: v \( \neq\) Vertex_handle(), t.is_vertex(v).

template<typename PT, typename TDS>

Cell_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::cells_begin ( ) const

Starts at an arbitrary cell.

Iterates over all cells. Returns cells_end() if t.number_of_vertices() \( =0\).

template<typename PT, typename TDS>

void CGAL::Periodic_3_triangulation_3< PT, TDS >::convert_to_1_sheeted_covering ( ) const

Converts the current triangulation into the same periodic triangulation in the 1-sheeted covering space.

Attention: It is not recommended to interfere with the built-in covering management. Especially a premature conversion to the 1-sheeted covering space might lead to problems when modifying the triangulation later.

template<typename PT, typename TDS>

void CGAL::Periodic_3_triangulation_3< PT, TDS >::convert_to_27_sheeted_covering ( ) const

Converts the current triangulation into the same periodic triangulation in the 27-sheeted covering space.

Attention: It is not recommended to interfere with the built-in covering management. Especially a premature conversion to the 1-sheeted covering space might lead to problems when modifying the triangulation later.

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::degree ( Vertex_handle v) const

Returns the degree of a vertex, that is, the number of adjacent vertices.

Precondition: v \( \neq\) Vertex_handle(), t.is_vertex(v).

template<typename PT, typename TDS>

Edge_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::edges_begin ( ) const

Starts at an arbitrary edge.

Iterates over all edges. Returns edges_end() if t.number_of_vertices() \( =0\).

template<typename PT, typename TDS>

Facet_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::facets_begin ( ) const

Starts at an arbitrary facet.

Iterates over all facets. Returns facets_end() if t.number_of_vertices() \( =0\).

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::has_vertex	(	Cell_handle	c,
		int	i,
		Vertex_handle	v,
		int &	j
	)		const

Same for facet (c,i).

Computes the index j of v in c.

template<typename PT, typename TDS>

Cell_circulator CGAL::Periodic_3_triangulation_3< PT, TDS >::incident_cells	(	Edge	e,
		Cell_handle	start
	)		const

Starts at cell start.

Precondition: start is incident to e.

template<typename PT, typename TDS>

template<class OutputIterator >

OutputIterator CGAL::Periodic_3_triangulation_3< PT, TDS >::incident_cells	(	Vertex_handle	v,
		OutputIterator	cells
	)		const

Copies the Cell_handles of all cells incident to v to the output iterator cells.

Returns the resulting output iterator.

Precondition: v \( \neq\) Vertex_handle(), t.is_vertex(v).

template<typename PT, typename TDS>

template<class OutputIterator >

OutputIterator CGAL::Periodic_3_triangulation_3< PT, TDS >::incident_edges	(	Vertex_handle	v,
		OutputIterator	edges
	)		const

Copies the Edges incident to v to the output iterator edges.

Returns the resulting output iterator.

Precondition: v \( \neq\) Vertex_handle(), t.is_vertex(v).

template<typename PT, typename TDS>

Facet_circulator CGAL::Periodic_3_triangulation_3< PT, TDS >::incident_facets	(	Edge	e,
		Facet	start
	)		const

Starts at facet start.

Precondition: start is incident to e.

template<typename PT, typename TDS>

template<class OutputIterator >

OutputIterator CGAL::Periodic_3_triangulation_3< PT, TDS >::incident_facets	(	Vertex_handle	v,
		OutputIterator	facets
	)		const

Copies the Facets incident to v to the output iterator facets.

Returns the resulting output iterator.

Precondition: v \( \neq\) Vertex_handle(), t.is_vertex(v).

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_cell	(	Vertex_handle	u,
		Vertex_handle	v,
		Vertex_handle	w,
		Vertex_handle	x,
		Cell_handle &	c,
		int &	i,
		int &	j,
		int &	k,
		int &	l
	)		const

Tests whether (u,v,w,x) is a cell of t.

If the cell c is found, the method computes the indices i, j, k and l of the vertices u, v, w and x in c, in this order.

Precondition: u, v, w and x are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_cell	(	Vertex_handle	u,
		Vertex_handle	v,
		Vertex_handle	w,
		Vertex_handle	x,
		Cell_handle &	c
	)		const

Tests whether (u,v,w,x) is a cell of t and computes this cell c.

Precondition: u, v, w and x are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_cell	(	Vertex_handle	u,
		const Offset &	offu,
		Vertex_handle	v,
		const Offset &	offv,
		Vertex_handle	w,
		const Offset &	offw,
		Vertex_handle	x,
		const Offset &	offx,
		Cell_handle &	c,
		int &	i,
		int &	j,
		int &	k,
		int &	l
	)		const

Tests whether ((u,offu),(v,offv),(w,offv),(x,offx)) is a cell of t.

If the cell c is found, the method computes the indices i, j, k and l of the vertices u, v, w and x in c, in this order.

Precondition: u, v, w and x are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_cell	(	Vertex_handle	u,
		const Offset &	offu,
		Vertex_handle	v,
		const Offset &	offv,
		Vertex_handle	w,
		const Offset &	offw,
		Vertex_handle	x,
		const Offset &	offx,
		Cell_handle &	c
	)		const

Tests whether ((u,offu),(v,offv),(w,offv),(x,offx)) is a cell of t and computes this cell c.

Precondition: u, v, w and x are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_edge	(	Vertex_handle	u,
		Vertex_handle	v,
		Cell_handle &	c,
		int &	i,
		int &	j
	)		const

Tests whether (u,v) is an edge of t.

If the edge is found, it gives a cell c having this edge and the indices i and j of the vertices u and v in c, in this order.

Precondition: u and v are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_edge	(	Vertex_handle	u,
		const Offset &	offu,
		Vertex_handle	v,
		const Offset &	offv,
		Cell_handle &	c,
		int &	i,
		int &	j
	)		const

Tests whether ((u,offu),(v,offu)) is an edge of t.

If the edge is found, it gives a cell c having this edge and the indices i and j of the vertices u and v in c, in this order.

Precondition: u and v are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_extensible_triangulation_in_1_sheet_h1 ( ) const

The current triangulation remains a triangulation in the 1-sheeted covering space even after adding points if this method returns true.

This test relies on a heuristic, i.e. if it answers false nothing is known. This test runs in constant-time when not computing in the 1-sheeted covering space. (This test uses the length of the longest edge in the triangulation as a criterion [1].)

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_extensible_triangulation_in_1_sheet_h2 ( ) const

The same as is_extensible_triangulation_in_1_sheet_h1() but with a more precise heuristic, i.e. it might answer true in cases in which is_extensible_triangulation_in_1_sheet_h1() would not.

However, it is much less time efficient when not computing in the 1-sheeted covering space. (This test uses the diameter of the largest empty ball in the input point set as a criterion [1].)

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_facet	(	Vertex_handle	u,
		Vertex_handle	v,
		Vertex_handle	w,
		Cell_handle &	c,
		int &	i,
		int &	j,
		int &	k
	)		const

Tests whether (u,v,w) is a facet of t.

If the facet is found, it computes a cell c having this facet and the indices i, j and k of the vertices u, v and w in c, in this order.

Precondition: u, v and w are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_facet	(	Vertex_handle	u,
		const Offset &	offu,
		Vertex_handle	v,
		const Offset &	offv,
		Vertex_handle	w,
		const Offset &	offw,
		Cell_handle &	c,
		int &	i,
		int &	j,
		int &	k
	)		const

Tests whether ((u,offu),(v,offv),(w,offw)) is a facet of t.

If the facet is found, it computes a cell c having this facet and the indices i, j and k of the vertices u, v and w in c, in this order.

Precondition: u, v and w are vertices of t.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_valid ( bool verbose = false) const

Checks the combinatorial validity of the triangulation.

Checks also the validity of its geometric embedding (see Section Representation). When verbose is set to true, messages describing the first invalidity encountered are printed.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_valid	(	Cell_handle	c,
		bool	verbose = `false`
	)		const

Checks the combinatorial validity of the cell by calling the is_valid method of the Triangulation_data_structure cell class.

Also checks the geometric validity of c, if c is finite. (See Section Representation.)

When verbose is set to true, messages are printed to give a precise indication of the kind of invalidity encountered.

template<typename PT, typename TDS>

bool CGAL::Periodic_3_triangulation_3< PT, TDS >::is_vertex	(	const Point &	p,
		Vertex_handle &	v
	)		const

Tests whether p is a vertex of t by locating p in the triangulation.

If p is found, the associated vertex v is given.

template<typename PT, typename TDS>

Cell_handle CGAL::Periodic_3_triangulation_3< PT, TDS >::locate	(	const Point &	query,
		Cell_handle	start = `Cell_handle()`
	)		const

Returns the cell that contains the query in its interior.

If query lies on a facet, an edge or on a vertex, one of the cells having query on its boundary is returned.

The optional argument start is used as a starting place for the search.

Precondition: query lies in the original domain domain.

template<typename PT, typename TDS>

Cell_handle CGAL::Periodic_3_triangulation_3< PT, TDS >::locate	(	const Point &	query,
		Locate_type &	lt,
		int &	li,
		int &	lj,
		Cell_handle	start = `Cell_handle()`
	)		const

The \( k\)-face that contains query in its interior is returned, by means of the cell returned together with lt, which is set to the locate type of the query (VERTEX, EDGE, FACET, CELL) and two indices li and lj that specify the \( k\)-face of the cell containing query.

If the \( k\)-face is a cell, li and lj have no meaning; if it is a facet (resp. vertex), li gives the index of the facet (resp. vertex) and lj has no meaning; if it is an edge, li and lj give the indices of its vertices.

If there is no vertex in the triangulation yet, lt is set to EMPTY and locate returns the default constructed handle.

The optional argument start is used as a starting place for the search.

Precondition: query lies in the original domain domain.

template<typename PT, typename TDS>

int CGAL::Periodic_3_triangulation_3< PT, TDS >::mirror_index	(	Cell_handle	c,
		int	i
	)		const

Returns the index of c in its \( i^{th}\) neighbor.

Precondition: \( i \in\{0, 1, 2, 3\}\).

template<typename PT, typename TDS>

Vertex_handle CGAL::Periodic_3_triangulation_3< PT, TDS >::mirror_vertex	(	Cell_handle	c,
		int	i
	)		const

Returns the vertex of the \( i^{th}\) neighbor of c that is opposite to c.

Precondition: \( i \in\{0, 1, 2, 3\}\).

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_cells ( ) const

Returns the number of cells.

Counts all cells that are representatives of the same tetrahedron in \( \mathbb T_c^3\) as one cell.

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_edges ( ) const

Returns the number of edges.

Counts all edges that are representatives of the same segment in \( \mathbb T_c^3\) as one edge.

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_facets ( ) const

Returns the number of facets.

Counts all facets that are representatives of the same triangle in \( \mathbb T_c^3\) as one facet.

template<typename PT, typename TDS>

Covering_sheets CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_sheets ( ) const

This is an advanced function.

Advanced

Returns the number of sheets of the covering space the triangulation is currently computed in.

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_stored_cells ( ) const

Returns the number of cells in the data structure.

This is the same as the number of sheets times number_of_cells().

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_stored_edges ( ) const

Returns the number of edges in the data structure.

This is the same as the number of sheets times number_of_edges().

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_stored_facets ( ) const

Returns the number of facets in the data structure.

This is the same as the number of sheets times number_of_facets().

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_stored_vertices ( ) const

Returns the number of vertices in the data structure.

This is the same as the number of sheets times number_of_vertices().

template<typename PT, typename TDS>

size_type CGAL::Periodic_3_triangulation_3< PT, TDS >::number_of_vertices ( ) const

Returns the number of vertices.

Counts all vertices that are representatives of the same point in \( \mathbb T_c^3\) as one vertex.

template<typename PT, typename TDS>

Periodic_3_triangulation_3& CGAL::Periodic_3_triangulation_3< PT, TDS >::operator= ( const Periodic_3_triangulation_3< PT, TDS > & tr)

The triangulation tr is duplicated, and modifying the copy after the duplication does not modify the original.

The previous triangulation held by t is deleted.

template<typename PT, typename TDS>

Periodic_point CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_point ( const Vertex_handle v) const

Returns the periodic point given by vertex v.

If t is represented in the 1-sheeted covering space, the offset is always zero. Otherwise v can correspond to a periodic copy outside domain of an input point.

template<typename PT, typename TDS>

Periodic_point CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_point	(	const Cell_handle	c,
		int	i
	)		const

If t is represented in the 1-sheeted covering space, this function returns the periodic point given by the \( i\)-th vertex of cell c, that is the point in the original domain and the offset of the vertex in c.

If t is represented in the 27-sheeted covering space, this offset is possibly added to another offset determining the periodic copy.

Precondition: \( i \in\{0,1,2,3\}\)

template<typename PT, typename TDS>

Periodic_point_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_points_begin ( Iterator_type it = STORED) const

Iterates over the points of the triangulation.

Its behavior is defined by the Iterator_type it as described on CGAL::Periodic_3_triangulation_3::Iterator_type.

template<typename PT, typename TDS>

Periodic_point_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_points_end ( Iterator_type it = STORED) const

Past-the-end iterator.

Note that to match another Periodic_point_iterator both must have the same Iterator_type it.

template<typename PT, typename TDS>

Periodic_segment CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_segment	(	const Cell_handle	c,
		int	i,
		int	j
	)		const

Returns the periodic segment formed by the two point-offset pairs corresponding to the two vertices of edge (c,i,j).

Precondition: \( i,j \in\{0,1,2,3\}\), \( i\neq j\)

template<typename PT, typename TDS>

Periodic_segment_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_segments_begin ( Iterator_type it = STORED) const

Iterates over the segments of the triangulation.

Its behavior is defined by the Iterator_type it as described on CGAL::Periodic_3_triangulation_3::Iterator_type.

template<typename PT, typename TDS>

Periodic_segment_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_segments_end ( Iterator_type it = STORED) const

Past-the-end iterator.

Note that to match another Periodic_segment_iterator both must have the same Iterator_type it.

template<typename PT, typename TDS>

Periodic_tetrahedron_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_tetrahedra_begin ( Iterator_type it = STORED) const

Iterates over the tetrahedra of the triangulation.

Its behavior is defined by the Iterator_type it as described on CGAL::Periodic_3_triangulation_3::Iterator_type.

template<typename PT, typename TDS>

Periodic_tetrahedron_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_tetrahedra_end ( Iterator_type it = STORED) const

Past-the-end iterator.

Note that to match another Periodic_tetrahedron_iterator both must have the same Iterator_type it.

template<typename PT, typename TDS>

Periodic_triangle CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_triangle	(	const Cell_handle	c,
		int	i
	)		const

Returns the periodic triangle formed by the three point-offset pairs corresponding to the three vertices of facet (c,i).

The triangle is oriented so that its normal points to the inside of cell c.

Precondition: \( i \in\{0,1,2,3\}\)

template<typename PT, typename TDS>

Periodic_triangle_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_triangles_begin ( Iterator_type it = STORED) const

Iterates over the triangles of the triangulation.

Its behavior is defined by the Iterator_type it as described on CGAL::Periodic_3_triangulation_3::Iterator_type.

template<typename PT, typename TDS>

Periodic_triangle_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::periodic_triangles_end ( Iterator_type it = STORED) const

Past-the-end iterator.

Note that to match another Periodic_triangle_iterator both must have the same Iterator_type it.

template<typename PT, typename TDS>

void CGAL::Periodic_3_triangulation_3< PT, TDS >::set_domain ( const Iso_cuboid dom)

This is an advanced function.

Advanced

Changes the domain. Note that this function calls clear(), i.e., it erases the existing triangulation.

template<typename PT, typename TDS>

Bounded_side CGAL::Periodic_3_triangulation_3< PT, TDS >::side_of_cell	(	const Point &	p,
		Cell_handle	c,
		Locate_type &	lt,
		int &	li,
		int &	lj
	)		const

Returns a value indicating on which side of the oriented boundary of c the point p lies.

More precisely, it returns:

ON_BOUNDED_SIDE if p is inside the cell.
ON_BOUNDARY if p on the boundary of the cell. Then lt together with li and lj give the precise location on the boundary. (See the descriptions of the locate methods.)
ON_UNBOUNDED_SIDE if p lies outside the cell.
Precondition
query lies in the original domain domain.

template<typename PT, typename TDS>

void CGAL::Periodic_3_triangulation_3< PT, TDS >::swap ( Periodic_3_triangulation_3< PT, TDS > & tr)

The triangulations tr and t are swapped.

t.swap(tr) should be preferred to t = tr or to t(tr) if tr is deleted after that. Indeed, there is no copy of cells and vertices, thus this method runs in constant time.

template<typename PT, typename TDS>

Triangulation_data_structure& CGAL::Periodic_3_triangulation_3< PT, TDS >::tds ( )

This is an advanced function.

Advanced

Returns a reference to the triangulation data structure.

The responsibility of keeping a valid triangulation belongs to the user when using advanced operations allowing a direct manipulation of the tds. This method is mainly a help for users implementing their own triangulation algorithms.

template<typename PT, typename TDS>

Unique_vertex_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::unique_vertices_begin ( ) const

Starts at an arbitrary vertex.

Iterates over all vertices whose corresponding points lie in the original domain, i.e. for each set of periodic copies the Unique_vertex_iterator iterates over exactly one representative. Returns unique_vertices_end() if t.number_of_vertices() \( =0\).

template<typename PT, typename TDS>

Vertex_iterator CGAL::Periodic_3_triangulation_3< PT, TDS >::vertices_begin ( ) const

Starts at an arbitrary vertex.

Iterates over all vertices. Returns vertices_end() if t.number_of_vertices() \( =0\).

Friends And Related Function Documentation

template<typename PT, typename TDS>

ostream & operator<<	(	ostream &	os,
		const Periodic_3_triangulation_3< PT, TDS > &	t
	)

The information in the iostream is:

the original domain
the number of sheets of the covering space as in number_of_sheets()
the number of vertices
the non-combinatorial information of vertices (point resp. point-offset pairs, etc.)
the number of cells
the indices of the vertices of each cell
the indices of the neighbors of each cell, where the index corresponds to the preceding list of cells
the offsets corresponding to the vertices of the cells
the non-combinatorial information of each cell

template<typename PT, typename TDS>

template<class PT , class TDS1 , class TDS2 >

bool operator==	(	const Periodic_3_triangulation_3< PT, TDS1 > &	t1,
		const Periodic_3_triangulation_3< PT, TDS2 > &	t2
	)

Returns true iff there exist a bijection between the vertices of t1 and those of t2 and a bijection between the cells of t1 and those of t2, which preserve the geometry of the triangulation, that is, the points of each corresponding pair of vertices are equal, and the tetrahedra corresponding to each pair of cells are equal (up to a permutation of their vertices).

template<typename PT, typename TDS>

istream & operator>>	(	istream &	is,
		Periodic_3_triangulation_3< PT, TDS > &	t
	)

Precondition: is has the below described format.

The information in the iostream is:

the original domain
the number of sheets of the covering space as in number_of_sheets()
the number of vertices
the non-combinatorial information of vertices (point resp. point-offset pairs, etc.)
the number of cells
the indices of the vertices of each cell
the indices of the neighbors of each cell, where the index corresponds to the preceding list of cells
the offsets corresponding to the vertices of the cells
the non-combinatorial information of each cell

Definition

Related Functions

Types

Geometric Iterators:

Enums

Creation

Assignment

Access Functions

Non const access

Non-constant-time queries and conversions

Non-constant-time access functions

Geometric Access Functions

Queries

Point Location

Cell, Face, Edge and Vertex Iterators

Geometric Iterators

Cell and Facet Circulators

Traversal of the Incident Cells and Facets, and the Adjacent Vertices of a Given Vertex

Traversal Between Adjacent Cells

Checking

Member Typedef Documentation

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation