Functions to triangulate faces, and to refine and fair regions of a polygon mesh.

Functions
template<typename TriangleMesh , typename FaceRange , typename FaceOutputIterator , typename VertexOutputIterator , typename NamedParameters >
std::pair< FaceOutputIterator, VertexOutputIterator >	CGAL::Polygon_mesh_processing::refine (TriangleMesh &tmesh, const FaceRange &faces, FaceOutputIterator faces_out, VertexOutputIterator vertices_out, const NamedParameters &np)
	refines a region of a triangle mesh More...

template<typename TriangleMesh , typename VertexRange , typename NamedParameters >
bool	CGAL::Polygon_mesh_processing::fair (TriangleMesh &tmesh, const VertexRange &vertices, const NamedParameters &np)
	fairs a region on a triangle mesh. More...

template<typename PolygonMesh , typename FaceRange , typename NamedParameters >
void	CGAL::Polygon_mesh_processing::isotropic_remeshing (const FaceRange &faces, const double &target_edge_length, PolygonMesh &pmesh, const NamedParameters &np)
	remeshes a triangulated region of a polygon mesh. More...

template<typename PolygonMesh , typename EdgeRange , typename NamedParameters >
void	CGAL::Polygon_mesh_processing::split_long_edges (const EdgeRange &edges, const double &max_length, PolygonMesh &pmesh, const NamedParameters &np)
	splits the edges listed in `edges` into sub-edges that are not longer than the given threshold `max_length`. More...

template<typename PolygonMesh , typename NamedParameters >
bool	CGAL::Polygon_mesh_processing::triangulate_face (typename boost::graph_traits< PolygonMesh >::face_descriptor f, PolygonMesh &pmesh, const NamedParameters &np)
	triangulates a single face of a polygon mesh. More...

template<typename FaceRange , typename PolygonMesh , typename NamedParameters >
bool	CGAL::Polygon_mesh_processing::triangulate_faces (FaceRange face_range, PolygonMesh &pmesh, const NamedParameters &np)
	triangulates given faces of a polygon mesh. More...

template<typename PolygonMesh , typename NamedParameters >
bool	CGAL::Polygon_mesh_processing::triangulate_faces (PolygonMesh &pmesh, const NamedParameters &np)
	triangulates all faces of a polygon mesh. More...

Function Documentation

template<typename TriangleMesh , typename VertexRange , typename NamedParameters >

bool CGAL::Polygon_mesh_processing::fair	(	TriangleMesh &	tmesh,
		const VertexRange &	vertices,
		const NamedParameters &	np
	)

fairs a region on a triangle mesh.

The points of the selected vertices are relocated to yield an as-smooth-as-possible surface patch, based on solving a linear bi-Laplacian system with boundary constraints, described in [3]. The optional parameter fairing_continuity gives the ability to control the tangential continuity Cⁿ of the output mesh.

The region described by vertices might contain multiple disconnected components. Note that the mesh connectivity is not altered in any way, only vertex locations get updated.

Fairing might fail if fixed vertices, which are used as boundary conditions, do not suffice to solve constructed linear system.

Note that if the vertex range to which fairing is applied contains all the vertices of the triangle mesh, fairing does not fail, but the mesh gets shrinked to CGAL::ORIGIN.

Template Parameters

TriangleMesh	a model of `FaceGraph` and `MutableFaceGraph` that has an internal property map for `CGAL::vertex_point_t`
VertexRange	a range of vertex descriptors of `TriangleMesh`, model of `Range`. Its iterator type is `InputIterator`.
NamedParameters	a sequence of Named Parameters

Parameters

tmesh	the triangle mesh with patches to be faired
vertices	the vertices of the patches to be faired (the positions of only those vertices will be changed)
np	optional sequence of Named Parameters among the ones listed below

Named Parameters

vertex_point_map	the property map with the points associated to the vertices of `tmesh`
fairing_continuity	tangential continuity of the output surface patch. The larger `fairing_continuity` gets, the more fixed vertices are required
sparse_linear_solver	an instance of the sparse linear solver used for fairing

Returns: true if fairing is successful, otherwise no vertices are relocated

Precondition: is_triangle_mesh(tmesh)

Warning: This function involves linear algebra, that is computed using a non-exact floating-point arithmetic.

#include <CGAL/Polygon_mesh_processing/fair.h>

Examples:: Polygon_mesh_processing/refine_fair_example.cpp.

template<typename PolygonMesh , typename FaceRange , typename NamedParameters >

void CGAL::Polygon_mesh_processing::isotropic_remeshing	(	const FaceRange &	faces,
		const double &	target_edge_length,
		PolygonMesh &	pmesh,
		const NamedParameters &	np
	)

remeshes a triangulated region of a polygon mesh.

This operation sequentially performs edge splits, edge collapses, edge flips, tangential relaxation and projection to the initial surface to generate a smooth mesh with a prescribed edge length.

Template Parameters

PolygonMesh	model of `MutableFaceGraph` that has an internal property map for `CGAL::vertex_point_t`. The descriptor types `boost::graph_traits<PolygonMesh>::face_descriptor` and `boost::graph_traits<PolygonMesh>::halfedge_descriptor` must be models of `Hashable`. If `PolygonMesh`has an internal property map for `CGAL::face_index_t`, then it should be initialized
FaceRange	range of `boost::graph_traits<PolygonMesh>::face_descriptor`, model of `Range`. Its iterator type is `InputIterator`.
NamedParameters	a sequence of Named Parameters

Parameters

pmesh	a polygon mesh with triangulated surface patches to be remeshed
faces	the range of triangular faces defining one or several surface patches to be remeshed
target_edge_length	the edge length that is targetted in the remeshed patch
np	optional sequence of Named Parameters among the ones listed below

Precondition: if constraints protection is activated, the constrained edges should not be longer than 4/3*target_edge_length

Named Parameters

geom_traits	a geometric traits class instance, model of `Kernel`. Exact constructions kernels are not supported by this function.
vertex_point_map	the property map with the points associated to the vertices of `pmesh`. Instance of a class model of `ReadWritePropertyMap`.
number_of_iterations	the number of iterations for the sequence of atomic operations performed (listed in the above description)
edge_is_constrained_map	a property map containing the constrained-or-not status of each edge of `pmesh`. A constrained edge can be splitted or collapsed, but not flipped, nor its endpoints moved by smoothing. Note that patch boundary edges (i.e. incident to only one face in the range) are always considered as constrained edges.
vertex_is_constrained_map	a property map containing the constrained-or-not status of each vertex of `pmesh`. A constrained vertex cannot be modified at all during remeshing
protect_constraints	If `true`, the edges set as constrained in `edge_is_constrained_map` (or by default the boundary edges) are not splitted nor collapsed during remeshing. Note that around constrained edges that have their length higher than twice `target_edge_length`, remeshing will fail to provide good quality results. It can even fail to terminate because of cascading vertex insertions.
face_patch_map	a property map with the patch id's associated to the faces of `faces`. Instance of a class model of `ReadWritePropertyMap`. It gets updated during the remeshing process while new faces are created.
number_of_relaxation_steps	the number of iterations of tangential relaxation that are performed at each iteration of the remeshing process
relax_constraints	If `true`, the end vertices of the edges set as constrained in `edge_is_constrained_map` and boundary edges move along the constrained polylines they belong to.

See Also: split_long_edges()

#include <CGAL/Polygon_mesh_processing/remesh.h>

Examples:: Polygon_mesh_processing/isotropic_remeshing_example.cpp.

template<typename TriangleMesh , typename FaceRange , typename FaceOutputIterator , typename VertexOutputIterator , typename NamedParameters >

std::pair<FaceOutputIterator, VertexOutputIterator> CGAL::Polygon_mesh_processing::refine	(	TriangleMesh &	tmesh,
		const FaceRange &	faces,
		FaceOutputIterator	faces_out,
		VertexOutputIterator	vertices_out,
		const NamedParameters &	np
	)

refines a region of a triangle mesh

Template Parameters

TriangleMesh	model of `MutableFaceGraph` that has an internal property map for `CGAL::vertex_point_t`
FaceRange	range of face descriptors, model of `Range`. Its iterator type is `InputIterator`.
FaceOutputIterator	model of `OutputIterator` holding `boost::graph_traits<TriangleMesh>::face_descriptor` for patch faces
VertexOutputIterator	model of `OutputIterator` holding `boost::graph_traits<TriangleMesh>::vertex_descriptor` for patch vertices
NamedParameters	a sequence of Named Parameters

Parameters

tmesh	triangle mesh with patches to be refined
faces	the range of faces defining the patches to refine
faces_out	output iterator into which descriptors of new faces are recorded
vertices_out	output iterator into which descriptors of new vertices are recorded
np	optional sequence of Named Parameters among the ones listed below

Named Parameters

vertex_point_map	the property map with the points associated to the vertices of `tmesh` Instance of a class model of `ReadWritePropertyMap`
density_control_factor	factor to control density of the output mesh, where larger values lead to denser refinements. The density of vertices of `faces_out` is this factor times higher than the vertices of `faces.`

Returns: pair of faces_out and vertices_out

Precondition: is_triangle_mesh(tmesh)

#include <CGAL/Polygon_mesh_processing/refine.h>

Examples:: Polygon_mesh_processing/refine_fair_example.cpp.

template<typename PolygonMesh , typename EdgeRange , typename NamedParameters >

void CGAL::Polygon_mesh_processing::split_long_edges	(	const EdgeRange &	edges,
		const double &	max_length,
		PolygonMesh &	pmesh,
		const NamedParameters &	np
	)

splits the edges listed in edges into sub-edges that are not longer than the given threshold max_length.

Note this function is useful to split constrained edges before calling isotropic_remeshing() with protection of constraints activated (to match the constrained edge length required by the remeshing algorithm to be guaranteed to terminate)

Template Parameters

PolygonMesh	model of `MutableFaceGraph` that has an internal property map for `CGAL::vertex_point_t`.
EdgeRange	range of `boost::graph_traits<PolygonMesh>::edge_descriptor`, model of `Range`. Its iterator type is `InputIterator`.
NamedParameters	a sequence of Named Parameters

Parameters

pmesh	a polygon mesh
edges	the range of edges to be split if they are longer than given threshold
max_length	the edge length above which an edge from `edges` is split into to sub-edges
np	optional Named Parameters described below

Named Parameters

vertex_point_map the property map with the points associated to the vertices of pmesh. Instance of a class model of ReadWritePropertyMap.

See Also: isotropic_remeshing()

#include <CGAL/Polygon_mesh_processing/remesh.h>

Examples:: Polygon_mesh_processing/isotropic_remeshing_example.cpp.

template<typename PolygonMesh , typename NamedParameters >

bool CGAL::Polygon_mesh_processing::triangulate_face	(	typename boost::graph_traits< PolygonMesh >::face_descriptor	f,
		PolygonMesh &	pmesh,
		const NamedParameters &	np
	)

triangulates a single face of a polygon mesh.

This function depends on the package 2D Triangulation

Template Parameters

PolygonMesh	a model of `FaceListGraph` and `MutableFaceGraph` that has an internal property map for `boost::vertex_point_t`
NamedParameters	a sequence of Named Parameters

Parameters

f	face to be triangulated
pmesh	the polygon mesh to which the face to be triangulated belongs
np	optional sequence of Named Parameters among the ones listed below

Named Parameters

vertex_point_map	the property map with the points associated to the vertices of `pmesh`
geom_traits	a geometric traits class instance

Returns: true if the face has been triangulated.

#include <CGAL/Polygon_mesh_processing/triangulate_faces.h>

template<typename FaceRange , typename PolygonMesh , typename NamedParameters >

bool CGAL::Polygon_mesh_processing::triangulate_faces	(	FaceRange	face_range,
		PolygonMesh &	pmesh,
		const NamedParameters &	np
	)

triangulates given faces of a polygon mesh.

This function depends on the package 2D Triangulation

Template Parameters

FaceRange	range of `boost::graph_traits<PolygonMesh>::face_descriptor`, model of `Range`. Its iterator type is `InputIterator`.
PolygonMesh	a model of `FaceListGraph` and `MutableFaceGraph` that has an internal property map for `boost::vertex_point_t`
NamedParameters	a sequence of Named Parameters

Parameters

face_range	the range of faces to be triangulated
pmesh	the polygon mesh to be triangulated
np	optional sequence of Named Parameters among the ones listed below

Named Parameters

vertex_point_map	the property map with the points associated to the vertices of `pmesh`
geom_traits	a geometric traits class instance

Returns: true if all the faces have been triangulated.

See Also: triangulate_face()

#include <CGAL/Polygon_mesh_processing/triangulate_faces.h>

Examples:: Polygon_mesh_processing/triangulate_faces_example.cpp.

template<typename PolygonMesh , typename NamedParameters >

bool CGAL::Polygon_mesh_processing::triangulate_faces	(	PolygonMesh &	pmesh,
		const NamedParameters &	np
	)

triangulates all faces of a polygon mesh.

This function depends on the package 2D Triangulation

Template Parameters

PolygonMesh	a model of `FaceListGraph` and `MutableFaceGraph` that has an internal property map for `boost::vertex_point_t`
NamedParameters	a sequence of Named Parameters

Parameters

pmesh	the polygon mesh to be triangulated
np	optional sequence of Named Parameters among the ones listed below

Named Parameters

vertex_point_map	the property map with the points associated to the vertices of `pmesh`
geom_traits	a geometric traits class instance

Returns: true if all the faces have been triangulated.

See Also: triangulate_face()

#include <CGAL/Polygon_mesh_processing/triangulate_faces.h>