There are several overloaded function templates called intersection() that compute the intersection of two or more polygons and insert the resulting polygons with holes into a container via an output iterator.

A function template in this group that accepts two input polygons has one of the following signatures:

1.1.	`OutputIterator intersection(const Type1& pgn1, const Type2& pgn2, OutputIterator oi, UsePolylines = Tag_true());`
1.2.	`OutputIterator intersection(const Type1& pgn1, const Type2& pgn2, OutputIterator oi);`
2.	`OutputIterator intersection(const Type1& pgn1, const Type2& pgn2, OutputIterator oi, const GpsTraits& traits);`

There are also function templates that accept one or two ranges of input polygons:

3.1.	`OutputIterator intersection(InputIterator begin, InputIterator end, OutputIterator oi, UsePolylines = Tag_true());`
3.2.	`OutputIterator intersection(InputIterator begin, InputIterator end, OutputIterator oi);`
4.	`OutputIterator intersection(InputIterator begin, InputIterator end, OutputIterator oi, const GpsTraits& traits);`
5.1.	`OutputIterator intersection(InputIterator1 begin1, InputIterator1 end1, InputIterator2 begin2, InputIterator2 end2, OutputIterator oi, UsePolylines = Tag_true());`
5.2.	`OutputIterator intersection(InputIterator1 begin1, InputIterator1 end1, InputIterator2 begin2, InputIterator2 end2, OutputIterator oi);`
6.	`OutputIterator intersection(InputIterator1 begin1, InputIterator1 end1, InputIterator2 begin2, InputIterator2 end2, OutputIterator oi, const GpsTraits& traits);`

Template Parameters

UsePolylines determines whether the boundaries of the input polygons are treated as cyclic sequences of single ( \(x\)-monotone) segments or as cyclic sequences of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, the input polygons are converted to general polygons bounded by polylines before the operation is actually performed. Then, the resulting general polygons with holes are converted back to standard polygons with holes. If substituted with CGAL::Tag_false, the input polygons are used as is. Refer to Traits Selection for more information.

Parameters

oi	the output iterator for the result.

The types Type1 and Type2 of the parameters and of InputIterator1::value_type and InputIterator2::value_type must be convertible to the types specified in a row in the table below, respectively. The 3rd column specifies the corresponding dereference type of the output iterator.
The types that apply to signatures (1.1.) and (5.1.) above are restricted to those listed in rows 1–4 in the table below.
The types that apply to signatures (1.2.) and (5.2.) above are restricted to those listed in rows 5–8 in the table below.
The type of InputIterator::value_type in (3.1.) above must be convertible to either Polygon_2 or Polygon_with_holes_2.
The type of InputIterator::value_type in (3.2.) above must be convertible to either General_polygon_2 or General_polygon_with_holes_2.

	`Type1`	`Type2`	Dereference Type of `oi`
1	`Polygon_2`	`Polygon_2`	`Polygon_with_holes_2`
2	`Polygon_2`	`Polygon_with_holes_2`	`Polygon_with_holes_2`
3	`Polygon_with_holes_2`	`Polygon_2`	`Polygon_with_holes_2`
4	`Polygon_with_holes_2`	`Polygon_with_holes_2`	`Polygon_with_holes_2`
5	`General_polygon_2`	`General_polygon_2`	`General_polygon_with_holes_2`
6	`General_polygon_2`	`General_polygon_with_holes_2`	`General_polygon_with_holes_2`
7	`General_polygon_with_holes_2`	`General_polygon_2`	`General_polygon_with_holes_2`
8	`General_polygon_with_holes_2`	`General_polygon_with_holes_2`	`General_polygon_with_holes_2`

Parameters

pgn1,pgn2	the input polygons.
(end,begin)	a range of input polygons.
(end1,begin1)	the first range of input polygons.
(end2,begin2)	the second range of input polygons.
oi	the output iterator for the result.
traits	an optional traits object.

See also: CGAL::complement(); CGAL::do_intersect(); CGAL::join(); CGAL::difference(); CGAL::symmetric_difference()

Functions
template<typename Kernel , typename Container , typename OutputIterator >
OutputIterator	CGAL::intersection (const Polygon_2< Kernel, Container > &pgn1, const Polygon_2< Kernel, Container > &pgn2, OutputIterator oi)
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator , typename UsePolylines >
OutputIterator	CGAL::intersection (const Polygon_2< Kernel, Container > &pgn1, const Polygon_2< Kernel, Container > &pgn2, OutputIterator oi, UsePolylines=Tag_true())
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator >
OutputIterator	CGAL::intersection (const Polygon_2< Kernel, Container > &pgn1, const Polygon_with_holes_2< Kernel, Container > &pgn2, OutputIterator oi)
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator , typename UsePolylines >
OutputIterator	CGAL::intersection (const Polygon_2< Kernel, Container > &pgn1, const Polygon_with_holes_2< Kernel, Container > &pgn2, OutputIterator oi, UsePolylines=Tag_true())
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator >
OutputIterator	CGAL::intersection (const Polygon_with_holes_2< Kernel, Container > &pgn1, const Polygon_2< Kernel, Container > &pgn2, OutputIterator oi)
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<ctypename Kernel, ctypename Container, ctypename OutputIterator, typename UsePolylines >
OutputIterator	CGAL::intersection (const Polygon_with_holes_2< Kernel, Container > &pgn1, const Polygon_2< Kernel, Container > &pgn2, OutputIterator oi, UsePolylines=Tag_true())
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator >
OutputIterator	CGAL::intersection (const Polygon_with_holes_2< Kernel, Container > &pgn1, const Polygon_with_holes_2< Kernel, Container > &pgn2, OutputIterator oi)
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator , typename UsePolylines >
OutputIterator	CGAL::intersection (const Polygon_with_holes_2< Kernel, Container > &pgn1, const Polygon_with_holes_2< Kernel, Container > &pgn2, OutputIterator oi, UsePolylines=Tag_true())
	computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename ArrTraits , typename OutputIterator >
OutputIterator	CGAL::intersection (const General_polygon_2< ArrTraits > &pgn1, const General_polygon_2< ArrTraits > &pgn2, OutputIterator oi)
	computes the intersection of two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename ArrTraits , typename OutputIterator >
OutputIterator	CGAL::intersection (const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &pgn1, const General_polygon_2< ArrTraits > &pgn2, OutputIterator oi)
	computes the intersection of two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename ArrTraits , typename OutputIterator >
OutputIterator	CGAL::intersection (const General_polygon_2< ArrTraits > &pgn1, const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &pgn2, OutputIterator oi)
	computes the intersection of two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename Polygon , typename OutputIterator >
OutputIterator	CGAL::intersection (const General_polygon_with_holes_2< Polygon > &pgn1, const General_polygon_with_holes_2< Polygon > &pgn2, OutputIterator oi)
	computes the intersection of two general polygons with holes and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename InputIterator , typename OutputIterator >
OutputIterator	CGAL::intersection (InputIterator begin, InputIterator end, OutputIterator oi)
	Given a range of polygons (resp. More...

template<typename InputIterator , typename OutputIterator , typename UsePolylines >
OutputIterator	CGAL::intersection (InputIterator begin, InputIterator end, OutputIterator oi, UsePolylines=Tag_true())
	Given a range of polygons (resp. More...

template<typename InputIterator1 , typename InputIterator2 , typename OutputIterator >
OutputIterator	CGAL::intersection (InputIterator1 begin1, InputIterator1 end1, InputIterator2 begin2, InputIterator2 end2, OutputIterator oi)
	Given a range of polygons (resp. More...

template<typename InputIterator1 , typename InputIterator2 , typename OutputIterator , typename UsePolylines >
OutputIterator	CGAL::intersection (InputIterator1 begin1, InputIterator1 end1, InputIterator2 begin2, InputIterator2 end2, OutputIterator oi, UsePolylines=Tag_true())
	Given a range of polygons (resp. More...

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const Polygon_2< Kernel, Container > &pgn1, const Polygon_2< Kernel, Container > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const Polygon_2< Kernel, Container > &pgn1, const Polygon_with_holes_2< Kernel, Container > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const Polygon_with_holes_2< Kernel, Container > &pgn1, const Polygon_2< Kernel, Container > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two polygons and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const Polygon_with_holes_2< Kernel, Container > &pgn1, const Polygon_with_holes_2< Kernel, Container > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two polygons with holes and inserts the resulting polygons with holes into a container via an output iterator. More...

template<typename ArrTraits , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const General_polygon_2< ArrTraits > &pgn1, const General_polygon_2< ArrTraits > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename ArrTraits , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &pgn1, const General_polygon_2< ArrTraits > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename ArrTraits , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const General_polygon_2< ArrTraits > &pgn1, const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename Polygon , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (const General_polygon_with_holes_2< Polygon > &pgn1, const General_polygon_with_holes_2< Polygon > &pgn2, OutputIterator oi, const GpsTraits &traits)
	computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator. More...

template<typename InputIterator , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (InputIterator begin, InputIterator end, OutputIterator oi, const GpsTraits &traits)
	Given a range of polygons (resp. More...

template<typename InputIterator1 , typename InputIterator2 , typename OutputIterator , typename GpsTraits >
OutputIterator	CGAL::intersection (InputIterator1 begin1, InputIterator1 end1, InputIterator2 begin2, InputIterator2 end2, OutputIterator oi, const GpsTraits &traits)
	Given a range of polygons (resp. More...

Function Documentation

◆ intersection() [1/26]

template<typename Kernel , typename Container , typename OutputIterator >

OutputIterator CGAL::intersection	(	const Polygon_2< Kernel, Container > &	pgn1,
		const Polygon_2< Kernel, Container > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [2/26]

template<typename Kernel , typename Container , typename OutputIterator , typename UsePolylines >

OutputIterator CGAL::intersection	(	const Polygon_2< Kernel, Container > &	pgn1,
		const Polygon_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		UsePolylines	= `Tag_true()`
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Template Parameters

UsePolylines determines whether the boundary of pgn is treated as a cyclic sequence of single ( \(x\)-monotone) segments or as a cyclic sequence of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, pgn is converted to a general polygon bounded by polylines before the operation is actually performed. Then, the resulting general polygon with holes is converted back to a standard polygon. If substituted with CGAL::Tag_false, pgn is used as is. Refer to Traits Selection for more information.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [3/26]

template<typename Kernel , typename Container , typename OutputIterator >

OutputIterator CGAL::intersection	(	const Polygon_2< Kernel, Container > &	pgn1,
		const Polygon_with_holes_2< Kernel, Container > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [4/26]

template<typename Kernel , typename Container , typename OutputIterator , typename UsePolylines >

OutputIterator CGAL::intersection	(	const Polygon_2< Kernel, Container > &	pgn1,
		const Polygon_with_holes_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		UsePolylines	= `Tag_true()`
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Template Parameters

UsePolylines determines whether the boundaries of pgn is treated as cyclic sequences of single ( \(x\)-monotone) segments or as cyclic sequences of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, pgn is converted to a general polygon with holes bounded by polylines before the operation is actually performed. Then, the resulting general polygons with holes are converted back to a standard polygon with holes. If substituted with CGAL::Tag_false, pgn is used as is. Refer to Traits Selection for more information.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [5/26]

template<typename Kernel , typename Container , typename OutputIterator >

OutputIterator CGAL::intersection	(	const Polygon_with_holes_2< Kernel, Container > &	pgn1,
		const Polygon_2< Kernel, Container > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [6/26]

template<ctypename Kernel, ctypename Container, ctypename OutputIterator, typename UsePolylines >

OutputIterator CGAL::intersection	(	const Polygon_with_holes_2< Kernel, Container > &	pgn1,
		const Polygon_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		UsePolylines	= `Tag_true()`
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Template Parameters

UsePolylines determines whether the boundaries of pgn1 and pgn2 are treated as cyclic sequences of single ( \(x\)-monotone) segments or as a cyclic sequences of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, pgn1 and pgn2 are converted to a general polygons bounded by polylines before the operation is actually performed. Then, the resulting general polygons with holes are converted back to standard polygons with holes. If substituted with CGAL::Tag_false, pgn1 and pgn2 are used as is. Refer to Traits Selection for more information.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [7/26]

template<typename Kernel , typename Container , typename OutputIterator >

OutputIterator CGAL::intersection	(	const Polygon_with_holes_2< Kernel, Container > &	pgn1,
		const Polygon_with_holes_2< Kernel, Container > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [8/26]

template<typename Kernel , typename Container , typename OutputIterator , typename UsePolylines >

OutputIterator CGAL::intersection	(	const Polygon_with_holes_2< Kernel, Container > &	pgn1,
		const Polygon_with_holes_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		UsePolylines	= `Tag_true()`
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Template Parameters

UsePolylines determines whether the boundaries of pgn1 and pgn2 are treated as cyclic sequences of single ( \(x\)-monotone) segments or as a cyclic sequences of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, pgn1 and pgn2 are converted to a general polygon and a general polygon with holes, respectively, bounded by polylines before the operation is actually performed. Then, the resulting general polygons with holes are converted back to standard polygons with holes. If substituted with CGAL::Tag_false, pgn1 and pgn2 are used as is. Refer to Traits Selection for more information.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [9/26]

template<typename ArrTraits , typename OutputIterator >

OutputIterator CGAL::intersection	(	const General_polygon_2< ArrTraits > &	pgn1,
		const General_polygon_2< ArrTraits > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<General_polygon_2<ArrTraits>>`.

Returns: the past-the-end iterator of the output container.

Precondition: ArrTraits must be a model of the concept ArrangementDirectionalXMonotoneTraits_2.

◆ intersection() [10/26]

template<typename ArrTraits , typename OutputIterator >

OutputIterator CGAL::intersection	(	const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &	pgn1,
		const General_polygon_2< ArrTraits > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<General_polygon_2<ArrTraits>>`.

Returns: the past-the-end iterator of the output container.

Precondition: ArrTraits must be a model of the concept ArrangementDirectionalXMonotoneTraits_2.

◆ intersection() [11/26]

template<typename ArrTraits , typename OutputIterator >

OutputIterator CGAL::intersection	(	const General_polygon_2< ArrTraits > &	pgn1,
		const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<General_polygon_2<ArrTraits>>`.

Returns: the past-the-end iterator of the output container.

Precondition: ArrTraits must be a model of the concept ArrangementDirectionalXMonotoneTraits_2.

◆ intersection() [12/26]

template<typename Polygon , typename OutputIterator >

OutputIterator CGAL::intersection	(	const General_polygon_with_holes_2< Polygon > &	pgn1,
		const General_polygon_with_holes_2< Polygon > &	pgn2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection of two general polygons with holes and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<Polygon>`.

Returns: the past-the-end iterator of the output container.

◆ intersection() [13/26]

template<typename InputIterator , typename OutputIterator >

OutputIterator CGAL::intersection	(	InputIterator	begin,
		InputIterator	end,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

Given a range of polygons (resp.

general polygons) or a range of polygons with holes (resp. general polygons with holes) computes the intersection of all polygons in the range and inserts the resulting polygons with holes (resp. general polygons with holes) into a container via an output iterator.

Parameters

begin	the first iterator of the input range. Its value type is either `Polygon_2` (resp. `General_polygon_2`) or `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
end	the past-the-end iterator of the input range. Its value type is either `Polygon_2` (resp. `General_polygon_2`) or `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2` (resp. `General_polygons_with_holes_2`).

Returns: the past-the-end iterator of the output container.

◆ intersection() [14/26]

template<typename InputIterator , typename OutputIterator , typename UsePolylines >

OutputIterator CGAL::intersection	(	InputIterator	begin,
		InputIterator	end,
		OutputIterator	oi,
		UsePolylines	= `Tag_true()`
	)

#include <CGAL/Boolean_set_operations_2.h>

Given a range of polygons (resp.

general polygons) or a range of polygons with holes (resp. general polygons with holes) computes the intersection of all polygons in the range and inserts the resulting polygons with holes (resp. general polygons with holes) into a container via an output iterator.

Template Parameters

UsePolylines determines whether the boundaries of the polygons in the input range are treated as cyclic sequences of single ( \(x\)-monotone) segments or as a cyclic sequences of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, the input polygons are converted to general polygon with holes , bounded by polylines before the operation is actually performed. Then, the resulting general polygons with holes are converted back to standard polygons with holes. If substituted with CGAL::Tag_false, pgn1 and pgn2 are used as is. Refer to Traits Selection for more information.

Parameters

begin	the first iterator of the input range. Its value type is either `Polygon_2` (resp. `General_polygon_2`) or `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
end	the past-the-end iterator of the input range. Its value type is either `Polygon_2` (resp. `General_polygon_2`) or `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2` (resp. `General_polygons_with_holes_2`).

Returns: the past-the-end iterator of the output container.

◆ intersection() [15/26]

template<typename InputIterator1 , typename InputIterator2 , typename OutputIterator >

OutputIterator CGAL::intersection	(	InputIterator1	begin1,
		InputIterator1	end1,
		InputIterator2	begin2,
		InputIterator2	end2,
		OutputIterator	oi
	)

#include <CGAL/Boolean_set_operations_2.h>

Given a range of polygons (resp.

general polygons) and a range of polygons with holes (resp. general polygons with holes) computes the intersection of all polygons in the two ranges and inserts the resulting polygons with holes (resp. general polygons with holes) into a container via an output iterator.

Parameters

begin1	the first iterator of the 1st input range. Its value type is `Polygon_2` (resp. `General_polygon_2`).
end1	the past-the-end iterator of the 1st input range. Its value type is `Polygon_2` (resp. `General_polygon_2`).
begin2	the first iterator of the 2nd input range. Its value type is `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
end2	the past-the-end iterator of the 2nd input range. Its value type is `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2` (resp. `General_polygons_with_holes_2`).

Returns: the past-the-end iterator of the output container.

◆ intersection() [16/26]

template<typename InputIterator1 , typename InputIterator2 , typename OutputIterator , typename UsePolylines >

OutputIterator CGAL::intersection	(	InputIterator1	begin1,
		InputIterator1	end1,
		InputIterator2	begin2,
		InputIterator2	end2,
		OutputIterator	oi,
		UsePolylines	= `Tag_true()`
	)

#include <CGAL/Boolean_set_operations_2.h>

Given a range of polygons (resp.

general polygons) and a range of polygons with holes (resp. general polygons with holes) computes the intersection of all polygons in the two ranges and inserts the resulting polygons with holes (resp. general polygons with holes) into a container via an output iterator.

Template Parameters

UsePolylines determines whether the boundaries of the polygons in the input ranges are treated as cyclic sequences of single ( \(x\)-monotone) segments or as a cyclic sequences of ( \(x\)-monotone) polylines. If substituted with CGAL::Tag_true, which is the default, the input polygons are converted to general polygon with holes , bounded by polylines before the operation is actually performed. Then, the resulting general polygons with holes are converted back to standard polygons with holes. If substituted with CGAL::Tag_false, pgn1 and pgn2 are used as is. Refer to Traits Selection for more information.

Parameters

begin1	the first iterator of the 1st input range. Its value type is `Polygon_2` (resp. `General_polygon_2`).
end1	the past-the-end iterator of the 1st input range. Its value type is `Polygon_2` (resp. `General_polygon_2`).
begin2	the first iterator of the 2nd input range. Its value type is `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
end2	the past-the-end iterator of the 2nd input range. Its value type is `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2` (resp. `General_polygons_with_holes_2`).

Returns: the past-the-end iterator of the output container.

◆ intersection() [17/26]

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const Polygon_2< Kernel, Container > &	pgn1,
		const Polygon_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [18/26]

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const Polygon_2< Kernel, Container > &	pgn1,
		const Polygon_with_holes_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [19/26]

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const Polygon_with_holes_2< Kernel, Container > &	pgn1,
		const Polygon_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two polygons and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [20/26]

template<typename Kernel , typename Container , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const Polygon_with_holes_2< Kernel, Container > &	pgn1,
		const Polygon_with_holes_2< Kernel, Container > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two polygons with holes and inserts the resulting polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2<Kernel, Container>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [21/26]

template<typename ArrTraits , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const General_polygon_2< ArrTraits > &	pgn1,
		const General_polygon_2< ArrTraits > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<General_polygon_2<ArrTraits>>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: ArrTraits must be a model of the concept ArrangementDirectionalXMonotoneTraits_2.; GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [22/26]

template<typename ArrTraits , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &	pgn1,
		const General_polygon_2< ArrTraits > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<General_polygon_2<ArrTraits>>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: ArrTraits must be a model of the concept ArrangementDirectionalXMonotoneTraits_2.; GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [23/26]

template<typename ArrTraits , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const General_polygon_2< ArrTraits > &	pgn1,
		const General_polygon_with_holes_2< General_polygon_2< ArrTraits >> &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<General_polygon_2<ArrTraits>>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: ArrTraits must be a model of the concept ArrangementDirectionalXMonotoneTraits_2.; GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [24/26]

template<typename Polygon , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	const General_polygon_with_holes_2< Polygon > &	pgn1,
		const General_polygon_with_holes_2< Polygon > &	pgn2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

computes the intersection between two general polygons and inserts the resulting general polygons with holes into a container via an output iterator.

Parameters

pgn1	the 1st input polygon.
pgn2	the 2nd input polygon.
oi	the output iterator for the result. Its dereference type must be convertible to `General_polygon_with_holes_2<Polygon>`.
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [25/26]

template<typename InputIterator , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	InputIterator	begin,
		InputIterator	end,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

Given a range of polygons (resp.

general polygons) or a range of polygons with holes (resp. general polygons with holes) computes the intersection of all polygons in the range and inserts the resulting polygons with holes (resp. general polygons with holes) into a container via an output iterator.

Parameters

begin	the first iterator of the input range. Its value type is either `Polygon_2` (resp. `General_polygon_2`) or `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
end	the past-the-end iterator of the input range. Its value type is either `Polygon_2` (resp. `General_polygon_2`) or `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2` (resp. `General_polygons_with_holes_2`).
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

◆ intersection() [26/26]

template<typename InputIterator1 , typename InputIterator2 , typename OutputIterator , typename GpsTraits >

OutputIterator CGAL::intersection	(	InputIterator1	begin1,
		InputIterator1	end1,
		InputIterator2	begin2,
		InputIterator2	end2,
		OutputIterator	oi,
		const GpsTraits &	traits
	)

#include <CGAL/Boolean_set_operations_2.h>

Given a range of polygons (resp.

general polygons) and a range of polygons with holes (resp. general polygons with holes) computes the intersection between all polygons in the two ranges and inserts the resulting polygons with holes (resp. general polygons with holes) into a container via an output iterator.

Parameters

begin1	the first iterator of the 1st input range. Its value type is `Polygon_2` (resp. `General_polygon_2`).
end1	the past-the-end iterator of the 1st input range. Its value type is `Polygon_2` (resp. `General_polygon_2`).
begin2	the first iterator of the 2nd input range. Its value type is `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
end2	the past-the-end iterator of the 2nd input range. Its value type is `Polygon_with_holes_2` (resp. `General_polygon_with_holes_2`).
oi	the output iterator for the result. Its dereference type must be convertible to `Polygon_with_holes_2` (resp. `General_polygons_with_holes_2`).
traits	a traits object.

Returns: the past-the-end iterator of the output container.

Precondition: GpsTraits must be a model of GeneralPolygonSetTraits_2.

Functions

Function Documentation

◆ intersection() [1/26]

◆ intersection() [2/26]

◆ intersection() [3/26]

◆ intersection() [4/26]

◆ intersection() [5/26]

◆ intersection() [6/26]

◆ intersection() [7/26]

◆ intersection() [8/26]

◆ intersection() [9/26]

◆ intersection() [10/26]

◆ intersection() [11/26]

◆ intersection() [12/26]

◆ intersection() [13/26]

◆ intersection() [14/26]

◆ intersection() [15/26]

◆ intersection() [16/26]

◆ intersection() [17/26]

◆ intersection() [18/26]

◆ intersection() [19/26]

◆ intersection() [20/26]

◆ intersection() [21/26]

◆ intersection() [22/26]

◆ intersection() [23/26]

◆ intersection() [24/26]

◆ intersection() [25/26]

◆ intersection() [26/26]