CGAL 5.4.3 - Polygon Mesh Processing
User Manual

Authors
Sébastien Loriot, Mael Rouxel-Labbé, Jane Tournois, Ilker O. Yaz
neptun_head.jpg

Introduction

This package implements a collection of methods and classes for polygon mesh processing, ranging from basic operations on simplices, to complex geometry processing algorithms. The implementation of this package mainly follows algorithms and references given in Botsch et al.'s book on polygon mesh processing [4].

Polygon Mesh

A polygon mesh is a consistent and orientable surface mesh, that can have one or more boundaries. The faces are simple polygons. The edges are segments. Each edge connects two vertices, and is shared by two faces (including the null face for boundary edges). A polygon mesh can have any number of connected components, and also some self-intersections. In this package, a polygon mesh is considered to have the topology of a 2-manifold.

API

This package follows the BGL API described in CGAL and the Boost Graph Library. It can thus be used either with Polyhedron_3, Surface_mesh, or any class model of the concept FaceGraph. Each function or class of this package details the requirements on the input polygon mesh.

Named Parameters are used to deal with optional parameters. The page Named Parameters describes their usage.

Outline

The algorithms described in this manual are organized in sections:

  • Meshing : meshing algorithms, including triangulation of non-triangulated meshes, refinement, optimization by fairing, isotropic remeshing of triangulated surface meshes and smoothing algorithms.
  • Corefinement and Boolean Operations : methods to corefine triangle meshes and to compute boolean operations out of corefined closed triangle meshes.
  • Hole Filling : available hole filling algorithms, which can possibly be combined with refinement and fairing.
  • Predicates : predicates that can be evaluated on the processed polygon. mesh, which includes point location and self intersection tests.
  • Orientation : checking or fixing the orientation of a polygon soup.
  • Combinatorial Repairing : repair of polygon meshes and polygon soups.
  • Computing Normals : normal computation at vertices and on faces of a polygon mesh.
  • Slicer : functor able to compute the intersections of a polygon mesh with arbitrary planes (slicer).
  • Connected Components : methods to deal with connected components of a polygon mesh (extraction, marks, removal, ...).

Reading and Writing Polygon Meshes

In all functions of this package, the polygon meshes are required to be models of the graph concepts defined in the package CGAL and the Boost Graph Library Reference. Using common graph concepts enables having common input/output functions for all the models of these concepts. The page I/O Functions provides an exhaustive description of the available I/O functions. In addition, this package offers the function CGAL::Polygon_mesh_processing::IO::read_polygon_mesh(), which can perform some reparation if the input data do not represent a manifold surface.

Meshing

A surface patch can be refined by inserting new vertices and flipping edges to get a triangulation. Using a criterion presented in [8], the density of triangles near the boundary of the patch is approximated by the refinement function. The validity of the mesh is enforced by flipping edges. An edge is flipped only if the opposite edge does not exist in the original mesh and if no degenerate triangles are generated.

A region of the surface mesh (e.g. the refined region), can be faired to obtain a tangentially continuous and smooth surface patch. The region to be faired is defined as a range of vertices that are relocated. The fairing step minimizes a linear bi-Laplacian system with boundary constraints, described in [3]. The visual results of aforementioned steps are depicted by Figure 66.10 (c and d).

API

Meshing

Refinement and fairing functions can be applied to an arbitrary region on a triangle mesh, using :

Fairing needs a sparse linear solver and we recommend the use of Eigen 3.2 or later. Note that fairing might fail if fixed vertices, which are used as boundary conditions, do not suffice to solve the constructed linear system.

Many algorithms require as input meshes in which all the faces have the same degree, or even are triangles. Hence, one may want to triangulate all polygon faces of a mesh.

This package provides the function CGAL::Polygon_mesh_processing::triangulate_faces() that triangulates all faces of the input polygon mesh. An approximated support plane is chosen for each face, orthogonal to the normal vector computed by CGAL::Polygon_mesh_processing::compute_face_normal(). Then, the triangulation of each face is the one obtained by building a CGAL::Constrained_Delaunay_triangulation_2 in this plane. This choice is made because the constrained Delaunay triangulation is the triangulation that, given the edges of the face to be triangulated, maximizes the minimum angle of all the angles of the triangles in the triangulation.

Remeshing

The incremental triangle-based isotropic remeshing algorithm introduced by Botsch et al [2], [4] is implemented in this package. This algorithm incrementally performs simple operations such as edge splits, edge collapses, edge flips, and Laplacian smoothing. All the vertices of the remeshed patch are reprojected to the original surface to keep a good approximation of the input.

A triangulated region of a polygon mesh can be remeshed using the function CGAL::Polygon_mesh_processing::isotropic_remeshing(), as illustrated by Figure 66.1. The algorithm has only two parameters : the target edge length for the remeshed surface patch, and the number of iterations of the abovementioned sequence of operations. The bigger this number, the smoother and closer to target edge length the mesh will be.

An additional option has been added to protect (i.e. not modify) some given polylines. In some cases, those polylines are too long, and reaching the desired target edge length while protecting them is not possible and leads to an infinite loop of edge splits in the incident faces. To avoid that pitfall, the function CGAL::Polygon_mesh_processing::split_long_edges() should be called on the list of constrained edges before remeshing.

iso_remeshing.png
Figure 66.1 Isotropic remeshing. (a) Triangulated input surface mesh. (b) Surface uniformly and entirely remeshed. (c) Selection of a range of faces to be remeshed. (d) Surface mesh with the selection uniformly remeshed.

Smoothing

Smoothing of a triangulated mesh region can be achieved with algorithms that aim at either mesh smoothing or shape smoothing. While mesh smoothing is achieved by improving the quality of triangles based on criteria such as angle and area, shape smoothing is designed to be intrinsic, depending as little as possible on the discretization and smoothing the shape alone without optimizing the shape of the triangles.

  • Mesh smoothing: CGAL::Polygon_mesh_processing::smooth_mesh() moves vertices to optimize geometry around each vertex: it can try to equalize the angles between incident edges, or (and) move vertices so that areas of adjacent triangles tend to equalize. Border vertices are considered constrained and do not move at any step of the procedure. No vertices are inserted at any time. Angle and area smoothing algorithms are based on Surazhsky and Gotsman [9]. Since area smoothing considers only areas as a smoothing criterion, it may result in long and skinny triangles. To paliate this phenomenon, area smoothing is followed by an (optional) step of Delaunay-based edge flips. In any case, area smoothing is guaranteed to improve the spatial distribution of the vertices over the area that is being smoothed. A simple example can be found in Polygon_mesh_processing/mesh_smoothing_example.cpp.

Figure 66.2 Mesh smoothing of the closed surface blobby, containing self-intersections (circled in red). For each smoothing combination, 10 iterations were applied. From left to right: (a) Input mesh; (b) Smoothing based on areas without using Delaunay flips; (c) Smoothing based on areas with Delaunay flips; (d) Smoothing based on angles; (e) Smoothing based on angles and areas, with Delaunay flips.

smooth_statistics.png
Figure 66.3 Statistics for the various combinations of mesh smoothing.

  • Shape smoothing: CGAL::Polygon_mesh_processing::smooth_shape() incrementally moves vertices towards a weighted barycenter of their neighbors along the mean curvature flow. The curvature flow algorithm for shape smoothing is based on Desbrun et al. [6] and on Kazhdan et al. [7]. The algorithm uses the mean curvature flow to calculate the translation of vertices along the surface normal with a speed equal to the mean curvature of the area that is being smoothed. This means that vertices on sharp corners slide faster. If the region around a vertex is flat, this vertex does not move (zero curvature). To avoid the formation of undesirable neck pinches (cylindrical surface areas that form singularities) the algorithm slows down the evolution in cylindrical regions. The smoothed shape converges to a sphere while staying conformally equivalent to its original shape. A simple example can be found in Polygon_mesh_processing/shape_smoothing_example.cpp.

Figure 66.4 Shape smoothing of the devil model, using the mean curvature flow with a time step equal to 0.05 and constraining border vertices (located at the neck, where the mesh is open).

Meshing Examples

Refine and Fair a Region on a Triangle Mesh

The following example calls the functions CGAL::Polygon_mesh_processing::refine() and CGAL::Polygon_mesh_processing::fair() for some selected regions on the input triangle mesh.


File Polygon_mesh_processing/refine_fair_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/Polygon_mesh_processing/refine.h>
#include <CGAL/Polygon_mesh_processing/fair.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <fstream>
#include <map>
typedef CGAL::Polyhedron_3<Kernel> Polyhedron;
typedef Polyhedron::Vertex_handle Vertex_handle;
// extract vertices which are at most k (inclusive)
// far from vertex v in the graph of edges
void extract_k_ring(Vertex_handle v,
int k,
std::vector<Vertex_handle>& qv)
{
std::map<Vertex_handle, int> D;
qv.push_back(v);
D[v] = 0;
std::size_t current_index = 0;
int dist_v;
while (current_index < qv.size() && (dist_v = D[qv[current_index]]) < k)
{
v = qv[current_index++];
Polyhedron::Halfedge_around_vertex_circulator e(v->vertex_begin()), e_end(e);
do {
Vertex_handle new_v = e->opposite()->vertex();
if (D.insert(std::make_pair(new_v, dist_v + 1)).second)
qv.push_back(new_v);
} while (++e != e_end);
}
}
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off");
Polyhedron poly;
if(!PMP::IO::read_polygon_mesh(filename, poly) || !CGAL::is_triangle_mesh(poly))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
std::vector<Polyhedron::Facet_handle> new_facets;
std::vector<Vertex_handle> new_vertices;
PMP::refine(poly, faces(poly),
std::back_inserter(new_facets),
std::back_inserter(new_vertices),
CGAL::parameters::density_control_factor(2.));
std::ofstream refined_off("refined.off");
refined_off.precision(17);
refined_off << poly;
refined_off.close();
std::cout << "Refinement added " << new_vertices.size() << " vertices." << std::endl;
Polyhedron::Vertex_iterator v = poly.vertices_begin();
std::advance(v, 82/*e.g.*/);
std::vector<Vertex_handle> region;
extract_k_ring(v, 12/*e.g.*/, region);
bool success = PMP::fair(poly, region);
std::cout << "Fairing : " << (success ? "succeeded" : "failed") << std::endl;
std::ofstream faired_off("faired.off");
faired_off.precision(17);
faired_off << poly;
faired_off.close();
return 0;
}

Triangulate a Polygon Mesh

Triangulating a polygon mesh can be achieved through the function CGAL::Polygon_mesh_processing::triangulate_faces() as shown in the following example.


File Polygon_mesh_processing/triangulate_faces_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/triangulate_faces.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/boost/graph/helpers.h>
#include <fstream>
#include <iostream>
typedef Kernel::Point_3 Point;
typedef CGAL::Surface_mesh<Point> Surface_mesh;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/P.off");
const char* outfilename = (argc > 2) ? argv[2] : "P_tri.off";
Surface_mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
// Confirm that all faces are triangles.
for(boost::graph_traits<Surface_mesh>::face_descriptor f : faces(mesh))
if(!CGAL::is_triangle(halfedge(f, mesh), mesh))
std::cerr << "Error: non-triangular face left in mesh." << std::endl;
CGAL::IO::write_polygon_mesh(outfilename, mesh, CGAL::parameters::stream_precision(17));
return 0;
}

An additional parameter, named visitor can be used to track the how faces are triangulated into subfaces. The following examples shows how to use it.


File Polygon_mesh_processing/triangulate_faces_split_visitor_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/triangulate_faces.h>
#include <CGAL/boost/graph/copy_face_graph.h>
#include <boost/foreach.hpp>
#include <boost/unordered_map.hpp>
#include <fstream>
#include <map>
typedef Kernel::Point_3 Point;
typedef CGAL::Surface_mesh<Point> Surface_mesh;
typedef boost::graph_traits<Surface_mesh>::face_descriptor face_descriptor;
class Insert_iterator
{
typedef boost::unordered_map<face_descriptor,face_descriptor> Container;
Container& container;
public:
Insert_iterator(Container &c)
: container(c) {}
operator=(const std::pair<face_descriptor, face_descriptor>& p)
{
container[p.second] = p.first;
return *this;
}
operator*() { return *this; }
operator++(int) { return *this; }
};
struct Visitor
{
typedef boost::unordered_map<face_descriptor,face_descriptor> Container;
Container& container;
face_descriptor qfd;
Visitor(Container& container)
: container(container)
{}
void before_subface_creations(face_descriptor fd)
{
std::cout << "split : " << fd << " into:" << std::endl;
Container::iterator it = container.find(fd);
qfd = it->second;
container.erase(it);
}
void after_subface_created(face_descriptor fd)
{
std::cout << " " << fd;
container[fd]=qfd;
}
void after_subface_creations()
{
std::cout << std::endl;
}
};
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/P.off");
std::ifstream input(filename);
Surface_mesh mesh;
if (!input || !(input >> mesh) || mesh.is_empty())
{
std::cerr << "Not a valid off file." << std::endl;
return 1;
}
boost::unordered_map<face_descriptor,face_descriptor> t2q;
Surface_mesh copy;
CGAL::copy_face_graph(mesh, copy, CGAL::parameters::face_to_face_output_iterator(Insert_iterator(t2q)));
Visitor v(t2q);
CGAL::Polygon_mesh_processing::parameters::visitor(v));
for(boost::unordered_map<face_descriptor,face_descriptor>::iterator it = t2q.begin(); it != t2q.end(); ++it){
std::cout << it->first << " " << it->second << std::endl;
}
return 0;
}

Isotropic Remeshing of a Region on a Polygon Mesh

The following example shows a complete example of how the isotropic remeshing function can be used. First, the border of the polygon mesh is collected. Since the boundary edges will be considered as constrained and protected in this example, the function split_long_edges() is called first on these edges.

Once this is done, remeshing is run on all the surface, with protection of constraints activated, for 3 iterations.


File Polygon_mesh_processing/isotropic_remeshing_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/remesh.h>
#include <CGAL/Polygon_mesh_processing/border.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <boost/iterator/function_output_iterator.hpp>
#include <fstream>
#include <vector>
#include <string>
typedef boost::graph_traits<Mesh>::halfedge_descriptor halfedge_descriptor;
typedef boost::graph_traits<Mesh>::edge_descriptor edge_descriptor;
struct halfedge2edge
{
halfedge2edge(const Mesh& m, std::vector<edge_descriptor>& edges)
: m_mesh(m), m_edges(edges)
{}
void operator()(const halfedge_descriptor& h) const
{
m_edges.push_back(edge(h, m_mesh));
}
const Mesh& m_mesh;
std::vector<edge_descriptor>& m_edges;
};
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/pig.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh) || !CGAL::is_triangle_mesh(mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
double target_edge_length = (argc > 2) ? std::stod(std::string(argv[2])) : 0.04;
unsigned int nb_iter = 3;
std::cout << "Split border...";
std::vector<edge_descriptor> border;
PMP::border_halfedges(faces(mesh), mesh, boost::make_function_output_iterator(halfedge2edge(mesh, border)));
PMP::split_long_edges(border, target_edge_length, mesh);
std::cout << "done." << std::endl;
std::cout << "Start remeshing of " << filename
<< " (" << num_faces(mesh) << " faces)..." << std::endl;
PMP::isotropic_remeshing(faces(mesh), target_edge_length, mesh,
PMP::parameters::number_of_iterations(nb_iter)
.protect_constraints(true)); //i.e. protect border, here
std::cout << "Remeshing done." << std::endl;
return 0;
}

Corefinement and Boolean Operations

Definitions

Corefinement Given two triangulated surface meshes, the corefinement operation consists in refining both meshes so that their intersection polylines are a subset of edges in both refined meshes.

corefine.png
Figure 66.5 Corefinement of two triangulated surface meshes. (Left) Input meshes; (Right) The two input meshes corefined. The common edges of the two meshes are drawn in green.

Volume bounded by a triangulated surface mesh Given a closed triangulated surface mesh, each connected component splits the 3D space into two subspaces. The vertex sequence of each face of a component is seen either clockwise or counterclockwise from these two subspaces. The subspace that sees the sequence clockwise (resp. counterclockwise) is on the negative (resp. positive) side of the component. Given a closed triangulated surface mesh tm with no self-intersections, the connected components of tm divide the 3D space into subspaces. We say that tm bounds a volume if each subspace lies exclusively on the positive (or negative) side of all the incident connected components of tm. The volume bounded by tm is the union of all subspaces that are on negative sides of their incident connected components of tm.

bounded_vols.jpg
Figure 66.6 Volumes bounded by a triangulated surface mesh: The figure shows meshes representing three nested spheres (three connected components). The left side of the picture shows a clipped triangulated surface mesh, with the two possible orientations of the faces for which a volume is bounded by the mesh. The positive and negative sides of each connected component is displayed in light and dark blue, respectively. The right part of the picture shows clipped tetrahedral meshes of the corresponding bounded volumes.

Corefinement

The corefinement of two triangulated surface meshes can be done using the function CGAL::Polygon_mesh_processing::corefine(). It takes as input the two triangulated surface meshes to corefine. If constrained edge maps are provided, edges belonging to the intersection of the input meshes will be marked as constrained. In addition, if an edge that was marked as constrained is split during the corefinement, sub-edges will be marked as constrained as well.

Boolean Operations

bool_op.png
Figure 66.7 Let C and S be the volumes bounded by the triangulated surface meshes of a cube and a sphere, respectively. From left to right, the picture shows the triangulated surface meshes bounding the union of C and S, C minus S, the intersection of C and S and S minus C.

The corefinement of two triangulated surface meshes can naturally be used for computing Boolean operations on volumes. Considering two triangulated surface meshes, each bounding a volume, the functions CGAL::Polygon_mesh_processing::corefine_and_compute_union(), CGAL::Polygon_mesh_processing::corefine_and_compute_intersection() and CGAL::Polygon_mesh_processing::corefine_and_compute_difference() respectively compute the union, the intersection and the difference of the two volumes. If several Boolean operations must be computed at the same time, the function corefine_and_compute_boolean_operations() should be used.

There is no restriction on the topology of the input volumes. However, there are some requirements on the input to guarantee that the operation is possible. First, the input meshes must not self-intersect. Second, the operation is possible only if the output can be bounded by a manifold triangulated surface mesh. In particular this means that the output volume has no part with zero thickness. Mathematically speaking, the intersection with an infinitesimally small ball centered in the output volume is a topological ball. At the surface level this means that no non-manifold vertex or edge is allowed in the output. For example, it is not possible to compute the union of two cubes that are disjoint but sharing an edge. In case you have to deal with such scenarios, you should consider using the package 3D Boolean Operations on Nef Polyhedra.

It is possible to update the input so that it contains the result (in-place operation). In that case the whole mesh will not be copied and only the region around the intersection polyline will be modified. In case the Boolean operation is not possible, the input mesh will nevertheless be corefined.

Kernel and Validity of the Output

The corefinement operation (which is also internally used in the three Boolean operations) will correctly change the topology of the input surface mesh if the point type used in the point property maps of the input meshes is from a CGAL Kernel with exact predicates. If that kernel does not have exact constructions, the embedding of the output surface mesh might have self-intersections. In case of consecutive operations, it is thus recommended to use a point property map with points from a kernel with exact predicates and exact constructions (such as CGAL::Exact_predicates_exact_constructions_kernel).

In practice, this means that with exact predicates and inexact constructions, edges will be split at each intersection with a triangle but the position of the intersection point might create self-intersections due to the limited precision of floating point numbers.

Clipping

As a natural extension, some clipping functionalities with a volume bounded by a closed mesh and a halfspace (defined by the negative side of a plane to be consistent with the outward normal convention) are offered. The functions CGAL::Polygon_mesh_processing::clip() and CGAL::Polygon_mesh_processing::split() have some options to select whether the clipping should be done at the volume or surface level, and also if the clipper should be considered as compact or not. This is illustrated on Figure 66.8 and Figure 66.9.

clip_open_close.png
Figure 66.8 Clipping a cube with a halfspace. From left to right: (i) initial cube and the plane defining the clipping halfspace; (ii) clip_volume=false: clipping of the surface mesh (boundary edges depicted in red); (iii) clip_volume=true: clipping of the volume bounded by the surface mesh.

clip_compact.png
Figure 66.9 Clipping a cube with a halfspace: compacity of the clipper (clip_volume=false in both cases). From left to right: (i) initial cube and the plane defining the clipping halfspace, note that a whole face of the cube (2 triangles) is exactly contained in the plane; (ii) use_compact_clipper=true: clipping of the surface mesh with a compact halfspace: coplanar faces are part of the output; (iii) use_compact_clipper=false: clipping of the surface mesh with a non-compact halfspace: coplanar faces are not part of the output.

Examples

Computing the Union of Two Volumes


File Polygon_mesh_processing/corefinement_mesh_union.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/corefinement.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <fstream>
int main(int argc, char* argv[])
{
const std::string filename1 = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off");
const std::string filename2 = (argc > 2) ? argv[2] : CGAL::data_file_path("meshes/eight.off");
Mesh mesh1, mesh2;
if(!PMP::IO::read_polygon_mesh(filename1, mesh1) || !PMP::IO::read_polygon_mesh(filename2, mesh2))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
Mesh out;
bool valid_union = PMP::corefine_and_compute_union(mesh1,mesh2, out);
if(valid_union)
{
std::cout << "Union was successfully computed\n";
CGAL::IO::write_polygon_mesh("union.off", out, CGAL::parameters::stream_precision(17));
return 0;
}
std::cout << "Union could not be computed\n";
return 1;
}

Boolean Operation and Local Remeshing

This example is similar to the previous one, but here we substract a volume and update the first input triangulated surface mesh (in-place operation). The edges that are on the intersection of the input meshes are marked and the region around them is remeshed isotropically while preserving the intersection polyline.
File Polygon_mesh_processing/corefinement_difference_remeshed.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/corefinement.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/Polygon_mesh_processing/remesh.h>
#include <CGAL/boost/graph/selection.h>
#include <fstream>
#include <iostream>
typedef boost::graph_traits<Mesh>::halfedge_descriptor halfedge_descriptor;
typedef boost::graph_traits<Mesh>::edge_descriptor edge_descriptor;
typedef boost::graph_traits<Mesh>::face_descriptor face_descriptor;
namespace params = PMP::parameters;
struct Vector_pmap_wrapper
{
std::vector<bool>& vect;
Vector_pmap_wrapper(std::vector<bool>& v) : vect(v) {}
friend bool get(const Vector_pmap_wrapper& m, face_descriptor f)
{
return m.vect[f];
}
friend void put(const Vector_pmap_wrapper& m, face_descriptor f, bool b)
{
m.vect[f]=b;
}
};
int main(int argc, char* argv[])
{
const std::string filename1 = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off");
const std::string filename2 = (argc > 2) ? argv[2] : CGAL::data_file_path("meshes/eight.off");
Mesh mesh1, mesh2;
if(!PMP::IO::read_polygon_mesh(filename1, mesh1) || !PMP::IO::read_polygon_mesh(filename2, mesh2))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
//create a property on edges to indicate whether they are constrained
Mesh::Property_map<edge_descriptor,bool> is_constrained_map =
mesh1.add_property_map<edge_descriptor,bool>("e:is_constrained", false).first;
// update mesh1 to contain the mesh bounding the difference
// of the two input volumes.
bool valid_difference =
mesh2,
mesh1,
params::all_default(), // default parameters for mesh1
params::all_default(), // default parameters for mesh2
params::edge_is_constrained_map(is_constrained_map));
if (valid_difference)
{
std::cout << "Difference was successfully computed\n";
CGAL::IO::write_polygon_mesh("difference.off", mesh1, CGAL::parameters::stream_precision(17));
}
else
{
std::cout << "Difference could not be computed\n";
return 1;
}
// collect faces incident to a constrained edge
std::vector<face_descriptor> selected_faces;
std::vector<bool> is_selected(num_faces(mesh1), false);
for(edge_descriptor e : edges(mesh1))
if (is_constrained_map[e])
{
// insert all faces incident to the target vertex
for(halfedge_descriptor h : halfedges_around_target(halfedge(e,mesh1),mesh1))
{
if (!is_border(h, mesh1) )
{
face_descriptor f=face(h, mesh1);
if ( !is_selected[f] )
{
selected_faces.push_back(f);
is_selected[f]=true;
}
}
}
}
// increase the face selection
CGAL::expand_face_selection(selected_faces, mesh1, 2,
Vector_pmap_wrapper(is_selected), std::back_inserter(selected_faces));
std::cout << selected_faces.size()
<< " faces were selected for the remeshing step\n";
// remesh the region around the intersection polylines
PMP::isotropic_remeshing(selected_faces, 0.02, mesh1,
params::edge_is_constrained_map(is_constrained_map));
CGAL::IO::write_polygon_mesh("difference_remeshed.off", mesh1, CGAL::parameters::stream_precision(17));
return 0;
}

Robustness of Consecutive Operations

This example computes the intersection of two volumes and then does the union of the result with one of the input volumes. This operation is in general not possible when using inexact constructions. Instead of using a mesh with a point from a kernel with exact constructions, the exact points are a property of the mesh vertices that we can reuse in a later operations. With that property, we can manipulate a mesh with points having floating point coordinates but benefit from the robustness provided by the exact constructions.
File Polygon_mesh_processing/corefinement_consecutive_bool_op.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Exact_predicates_exact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/corefinement.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <fstream>
#include <iostream>
typedef boost::graph_traits<Mesh>::vertex_descriptor vertex_descriptor;
typedef Mesh::Property_map<vertex_descriptor,EK::Point_3> Exact_point_map;
namespace params = PMP::parameters;
struct Exact_vertex_point_map
{
// typedef for the property map
typedef boost::property_traits<Exact_point_map>::value_type value_type;
typedef boost::property_traits<Exact_point_map>::reference reference;
typedef boost::property_traits<Exact_point_map>::key_type key_type;
typedef boost::read_write_property_map_tag category;
// exterior references
Exact_point_map exact_point_map;
Mesh* tm_ptr;
// Converters
Exact_vertex_point_map()
: tm_ptr(nullptr)
{}
Exact_vertex_point_map(const Exact_point_map& ep, Mesh& tm)
: exact_point_map(ep)
, tm_ptr(&tm)
{
for (Mesh::Vertex_index v : vertices(tm))
exact_point_map[v]=to_exact(tm.point(v));
}
friend
reference get(const Exact_vertex_point_map& map, key_type k)
{
CGAL_precondition(map.tm_ptr!=nullptr);
return map.exact_point_map[k];
}
friend
void put(const Exact_vertex_point_map& map, key_type k, const EK::Point_3& p)
{
CGAL_precondition(map.tm_ptr!=nullptr);
map.exact_point_map[k]=p;
// create the input point from the exact one
map.tm_ptr->point(k)=map.to_input(p);
}
};
int main(int argc, char* argv[])
{
const std::string filename1 = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off");
const std::string filename2 = (argc > 2) ? argv[2] : CGAL::data_file_path("meshes/eight.off");
Mesh mesh1, mesh2;
if(!PMP::IO::read_polygon_mesh(filename1, mesh1) || !PMP::IO::read_polygon_mesh(filename2, mesh2))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
Exact_point_map mesh1_exact_points =
mesh1.add_property_map<vertex_descriptor,EK::Point_3>("v:exact_point").first;
Exact_point_map mesh2_exact_points =
mesh2.add_property_map<vertex_descriptor,EK::Point_3>("v:exact_point").first;
Exact_vertex_point_map mesh1_vpm(mesh1_exact_points, mesh1);
Exact_vertex_point_map mesh2_vpm(mesh2_exact_points, mesh2);
mesh2,
mesh1,
params::vertex_point_map(mesh1_vpm),
params::vertex_point_map(mesh2_vpm),
params::vertex_point_map(mesh1_vpm) ) )
{
mesh2,
mesh2,
params::vertex_point_map(mesh1_vpm),
params::vertex_point_map(mesh2_vpm),
params::vertex_point_map(mesh2_vpm) ) )
{
std::cout << "Intersection and union were successfully computed\n";
CGAL::IO::write_polygon_mesh("inter_union.off", mesh2, CGAL::parameters::stream_precision(17));
return 0;
}
std::cout << "Union could not be computed\n";
return 1;
}
std::cout << "Intersection could not be computed\n";
return 1;
}

Hole Filling

This package provides an algorithm for filling one closed hole that is either in a triangulated surface mesh or defined by a sequence of points that describe a polyline. The main steps of the algorithm are described in [8] and can be summarized as follows.

First, the largest patch triangulating the boundary of the hole is generated without introducing any new vertex. The patch is selected so as to minimize a quality function evaluated for all possible triangular patches. The quality function first minimizes the worst dihedral angle between patch triangles, then the total surface area of the patch as a tiebreaker. Following the suggestions in [12], the performance of the algorithm is significantly improved by narrowing the search space to faces of a 3D Delaunay triangulation of the hole boundary vertices, from all possible patches, while searching for the best patch with respect to the aforementioned quality criteria.

For some complicated input hole boundary, the generated patch may have self-intersections. After hole filling, the generated patch can be refined and faired using the meshing functions CGAL::Polygon_mesh_processing::refine() and CGAL::Polygon_mesh_processing::fair() described in Section Meshing.

mech_hole_horz.jpg
Figure 66.10 Results of the main steps of the algorithm. From left to right: (a) the hole, (b) the hole after its triangulation, (c) after triangulation and refinement, (d) after triangulation, refinement and fairing.

API

This package provides four functions for hole filling:

Examples

Triangulate a Polyline

The following example triangulates a hole described by an input polyline.


File Polygon_mesh_processing/triangulate_polyline_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>
#include <CGAL/utility.h>
#include <vector>
#include <iterator>
typedef Kernel::Point_3 Point;
int main()
{
std::vector<Point> polyline;
polyline.push_back(Point( 1.,0.,0.));
polyline.push_back(Point( 0.,1.,0.));
polyline.push_back(Point(-1.,0.,0.));
polyline.push_back(Point( 1.,1.,0.));
// repeating first point (i.e. polyline.push_back(Point(1.,0.,0.)) ) is optional
// any type, having Type(int, int, int) constructor available, can be used to hold output triangles
typedef CGAL::Triple<int, int, int> Triangle_int;
std::vector<Triangle_int> patch;
patch.reserve(polyline.size() -2); // there will be exactly n-2 triangles in the patch
polyline,
std::back_inserter(patch));
for(std::size_t i = 0; i < patch.size(); ++i)
{
std::cout << "Triangle " << i << ": "
<< patch[i].first << " " << patch[i].second << " " << patch[i].third
<< std::endl;
}
// note that no degenerate triangles are generated in the patch
std::vector<Point> polyline_collinear;
polyline_collinear.push_back(Point(1.,0.,0.));
polyline_collinear.push_back(Point(2.,0.,0.));
polyline_collinear.push_back(Point(3.,0.,0.));
polyline_collinear.push_back(Point(4.,0.,0.));
std::vector<Triangle_int> patch_will_be_empty;
back_inserter(patch_will_be_empty));
CGAL_assertion(patch_will_be_empty.empty());
return 0;
}

Hole Filling From the Border of the Hole

If the input polygon mesh has a hole or more than one hole, it is possible to iteratively fill them by detecting border edges (i.e. with only one incident non-null face) after each hole filling step.

Holes are filled one after the other, and the process stops when there is no border edge left.

This process is illustrated by the example below, where holes are iteratively filled, refined and faired. Optionally, only holes not exceeding a certain diameter or number of edges can be filled. This example assumes that the mesh is stored in a Surface_mesh datastructure. Analogous examples when using the Polyhedron_3 class and a few others are part of the code base.


File Polygon_mesh_processing/hole_filling_example_SM.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>
#include <CGAL/Polygon_mesh_processing/border.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <boost/lexical_cast.hpp>
#include <iostream>
#include <fstream>
#include <vector>
#include <set>
typedef Kernel::Point_3 Point;
typedef boost::graph_traits<Mesh>::vertex_descriptor vertex_descriptor;
typedef boost::graph_traits<Mesh>::halfedge_descriptor halfedge_descriptor;
typedef boost::graph_traits<Mesh>::face_descriptor face_descriptor;
bool is_small_hole(halfedge_descriptor h, Mesh & mesh,
double max_hole_diam, int max_num_hole_edges)
{
int num_hole_edges = 0;
CGAL::Bbox_3 hole_bbox;
for (halfedge_descriptor hc : CGAL::halfedges_around_face(h, mesh))
{
const Point& p = mesh.point(target(hc, mesh));
hole_bbox += p.bbox();
++num_hole_edges;
// Exit early, to avoid unnecessary traversal of large holes
if (num_hole_edges > max_num_hole_edges) return false;
if (hole_bbox.xmax() - hole_bbox.xmin() > max_hole_diam) return false;
if (hole_bbox.ymax() - hole_bbox.ymin() > max_hole_diam) return false;
if (hole_bbox.zmax() - hole_bbox.zmin() > max_hole_diam) return false;
}
return true;
}
// Incrementally fill the holes that are no larger than given diameter
// and with no more than a given number of edges (if specified).
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/mech-holes-shark.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
// Both of these must be positive in order to be considered
double max_hole_diam = (argc > 2) ? boost::lexical_cast<double>(argv[2]): -1.0;
int max_num_hole_edges = (argc > 3) ? boost::lexical_cast<int>(argv[3]) : -1;
unsigned int nb_holes = 0;
std::vector<halfedge_descriptor> border_cycles;
// collect one halfedge per boundary cycle
PMP::extract_boundary_cycles(mesh, std::back_inserter(border_cycles));
for(halfedge_descriptor h : border_cycles)
{
if(max_hole_diam > 0 && max_num_hole_edges > 0 &&
!is_small_hole(h, mesh, max_hole_diam, max_num_hole_edges))
continue;
std::vector<face_descriptor> patch_facets;
std::vector<vertex_descriptor> patch_vertices;
bool success = std::get<0>(PMP::triangulate_refine_and_fair_hole(mesh,
h,
std::back_inserter(patch_facets),
std::back_inserter(patch_vertices)));
std::cout << "* Number of facets in constructed patch: " << patch_facets.size() << std::endl;
std::cout << " Number of vertices in constructed patch: " << patch_vertices.size() << std::endl;
std::cout << " Is fairing successful: " << success << std::endl;
++nb_holes;
}
std::cout << std::endl;
std::cout << nb_holes << " holes have been filled" << std::endl;
CGAL::IO::write_polygon_mesh("filled_SM.off", mesh, CGAL::parameters::stream_precision(17));
std::cout << "Mesh written to: filled_SM.off" << std::endl;
return 0;
}

fork.jpg
Figure 66.11 Holes in the fork model are filled with triangle patches.

Performance

The hole filling algorithm has a complexity which depends on the number of vertices. While [8] has a running time of \( O(n^3)\) , [12] in most cases has running time of \( O(n \log n)\). We benchmarked the function triangulate_refine_and_fair_hole() for the two meshes below (as well as two more meshes with smaller holes). The machine used was a PC running Windows 10 with an Intel Core i7 CPU clocked at 2.70 GHz. The program was compiled with the Visual C++ 2013 compiler with the O2 option, which maximizes speed.

elephants-with-holes.png
Figure 66.12 The elephant on the left/right has a hole with 963/7657 vertices.

The following running times were observed:

# vertices without Delaunay (sec.) with Delaunay (sec.)
565 8.5 0.03
774 21 0.035
967 43 0.06
7657 na 0.4

Predicates

This packages provides several predicates to be evaluated with respect to a triangle mesh.

Intersections Detection

Intersection tests between triangle meshes and/or polylines can be done using CGAL::Polygon_mesh_processing::do_intersect() . Additionally, the function CGAL::Polygon_mesh_processing::intersecting_meshes() records all pairs of intersecting meshes in a range.

Self Intersections

Self intersections within a triangle mesh can be detected by calling the function CGAL::Polygon_mesh_processing::does_self_intersect(). Additionally, the function CGAL::Polygon_mesh_processing::self_intersections() reports all pairs of intersecting triangles.

Self Intersections Example

The following example illustrates the detection of self intersection in the pig.off mesh. The detected self-intersection is illustrated on Figure Figure 66.13.


File Polygon_mesh_processing/self_intersections_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/self_intersections.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/Real_timer.h>
#include <CGAL/tags.h>
#include <iostream>
#include <fstream>
typedef boost::graph_traits<Mesh>::face_descriptor face_descriptor;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/pig.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh) || !CGAL::is_triangle_mesh(mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
std::cout << "Using parallel mode? " << std::is_same<CGAL::Parallel_if_available_tag, CGAL::Parallel_tag>::value << std::endl;
CGAL::Real_timer timer;
timer.start();
bool intersecting = PMP::does_self_intersect<CGAL::Parallel_if_available_tag>(mesh, CGAL::parameters::vertex_point_map(get(CGAL::vertex_point, mesh)));
std::cout << (intersecting ? "There are self-intersections." : "There is no self-intersection.") << std::endl;
std::cout << "Elapsed time (does self intersect): " << timer.time() << std::endl;
timer.reset();
std::vector<std::pair<face_descriptor, face_descriptor> > intersected_tris;
PMP::self_intersections<CGAL::Parallel_if_available_tag>(faces(mesh), mesh, std::back_inserter(intersected_tris));
std::cout << intersected_tris.size() << " pairs of triangles intersect." << std::endl;
std::cout << "Elapsed time (self intersections): " << timer.time() << std::endl;
return EXIT_SUCCESS;
}

Figure 66.13 Detecting self-intersections on a triangle mesh. The intersecting triangles are displayed in dark grey and red on the right image.

Side of Triangle Mesh

The class CGAL::Side_of_triangle_mesh provides a functor that tests whether a query point is inside, outside, or on the boundary of the domain bounded by a given closed triangle mesh.

A point is said to be on the bounded side of the domain bounded by the input triangle mesh if an odd number of surfaces is crossed when walking from the point to infinity. The input triangle mesh is expected to contain no self-intersections and to be free from self-inclusions.

The algorithm can handle the case of a triangle mesh with several connected components, and returns correct results. In case of self-inclusions, the ray intersections parity test is performed, and the execution will not fail. However, the user should be aware that the predicate alternately considers sub-volumes to be on the bounded and unbounded sides of the input triangle mesh.

Inside Test Example


File Polygon_mesh_processing/point_inside_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/point_generators_3.h>
#include <CGAL/Side_of_triangle_mesh.h>
#include <vector>
#include <fstream>
#include <limits>
typedef K::Point_3 Point;
typedef CGAL::Polyhedron_3<K> Polyhedron;
double max_coordinate(const Polyhedron& poly)
{
double max_coord = -std::numeric_limits<double>::infinity();
for(Polyhedron::Vertex_handle v : vertices(poly))
{
Point p = v->point();
max_coord = (std::max)(max_coord, p.x());
max_coord = (std::max)(max_coord, p.y());
max_coord = (std::max)(max_coord, p.z());
}
return max_coord;
}
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/eight.off");
Polyhedron poly;
if(!PMP::IO::read_polygon_mesh(filename, poly) || CGAL::is_empty(poly) || !CGAL::is_triangle_mesh(poly))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
double size = max_coordinate(poly);
unsigned int nb_points = 100;
std::vector<Point> points;
points.reserve(nb_points);
for (unsigned int i = 0; i < nb_points; ++i)
points.push_back(*gen++);
std::cout << "Test " << nb_points << " random points in cube "
<< "[-" << size << "; " << size <<"]" << std::endl;
int nb_inside = 0;
int nb_boundary = 0;
for (std::size_t i = 0; i < nb_points; ++i)
{
CGAL::Bounded_side res = inside(points[i]);
if (res == CGAL::ON_BOUNDED_SIDE) { ++nb_inside; }
if (res == CGAL::ON_BOUNDARY) { ++nb_boundary; }
}
std::cerr << "Total query size: " << points.size() << std::endl;
std::cerr << " " << nb_inside << " points inside " << std::endl;
std::cerr << " " << nb_boundary << " points on boundary " << std::endl;
std::cerr << " " << points.size() - nb_inside - nb_boundary << " points outside " << std::endl;
return 0;
}

Polyhedral Envelope Containment Check

The class CGAL::Polyhedral_envelope provides functors to check if a query point, segment, or triangle is fully contained in a polyhedral envelope of a triangle mesh or of a triangle soup. In the following, input triangles will refer either to the triangles of a mesh or of a soup.

The polyhedral envelope is a conservative approximation of the Minkowski sum envelope of a set of triangles with a sphere of radius \( \epsilon \). The latter has cylindrical and spherical patches at convex edges and vertices of the input triangles.

Given a distance \( \delta = \epsilon / \sqrt(3)\) we can associate a prism to each triangle by intersecting two halfspaces parallel to the triangle, three halfspaces orthogonal to the triangle and parallel to the edges, and additionaly halfspaces for clipping obtuse angles, with the face normal corresponding to the bisector of the angle. These halfspaces are at distance \( \delta \) and such that they contain the triangle.

The polyhedral envelope of a set of triangles with a tolerance \( \epsilon \) then is the union of the prisms of all faces with \( \delta = \epsilon / \sqrt(3) \).

envelope.png
Figure 66.14 The prism for a single triangle, the polyhedral envelope as well as the Minkowski sum envelope for a triangle mesh.

The polyhedral envelope is guaranteed to be inside the Minkowski sum envelope. This containment test is exact for the polyhedral envelope, and conservative for the Minkowswi sum envelope: If a query is inside the polyhedral envelope, we can be sure that it is also in the Minkowski sum envelope, but if it is outside the polyhedral envelope we do not know where it is with respect to the Minkowski sum envelope.

The algorithm of Wang et al. [11] for the polyhedral envelope containment check can be summarized as follows. The prisms of the faces of the input triangles are stored in an AABB tree, which is used to quickly identify the prisms whose bounding box overlaps with the query.

For a query point the algorithm checks if it is inside one of these prisms. For a query segment or triangle the algorithms checks if the query is completely covered. The details of how to check this covering can be found in the paper.

The polyhedral envelope containment check is used by the class Surface_mesh_simplification::Polyhedral_envelope_filter of the package Triangulated Surface Mesh Simplification, in order to simplify a triangle mesh within a given tolerance.

Polyhedral Envelope Example

The following example shows how to construct the polyhedral envelope for a Surface_mesh and perform queries.


File Polygon_mesh_processing/polyhedral_envelope.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedral_envelope.h>
#include <CGAL/Surface_mesh.h>
#include <fstream>
int main(int argc, char* argv[])
{
typedef Kernel::Point_3 Point_3;
typedef CGAL::Surface_mesh<Point_3> Surface_mesh;
typedef boost::graph_traits<Surface_mesh>::vertex_descriptor vertex_descriptor;
std::ifstream in((argc>1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off"));
Surface_mesh tmesh;
in >> tmesh;
double eps = (argc>2) ? std::stod(std::string(argv[2])) : 0.2;
Envelope envelope(tmesh, eps);
int i = (argc>3) ? std::stoi(std::string(argv[3])) : 0;
int j = (argc>4) ? std::stoi(std::string(argv[4])) : 100;
int k = (argc>5) ? std::stoi(std::string(argv[5])) : 200;
if(envelope(tmesh.point(vertex_descriptor(i)),
tmesh.point(vertex_descriptor(j)),
tmesh.point(vertex_descriptor(k)))){
std::cout << "inside polyhedral envelope" << std::endl;
}
return 0;
}

As the polyhedral envelope does not need any connectivity information, the same check can be performed just with a triangle soup.


File Polygon_mesh_processing/polyhedral_envelope_of_triangle_soup.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedral_envelope.h>
#include <CGAL/IO/OFF.h>
#include <vector>
#include <fstream>
int main(int argc, char* argv[])
{
typedef Kernel::Point_3 Point_3;
std::ifstream in((argc>1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off"));
double eps = (argc>2) ? std::stod(std::string(argv[2])) : 0.2;
std::vector<Point_3> points;
std::vector<std::vector<std::size_t> > polygons;
CGAL::IO::read_OFF(in, points, polygons);
Envelope envelope(points, polygons, eps);
int i = (argc>3) ? std::stoi(std::string(argv[3])) : 0;
int j = (argc>4) ? std::stoi(std::string(argv[4])) : 100;
int k = (argc>5) ? std::stoi(std::string(argv[5])) : 200;
if (envelope(points[i], points[j],points[k]))
{
std::cout << "inside polyhedral envelope" << std::endl;
}
return 0;
}

A triangle mesh can also be used as query, to check if a remeshed version is within the polyhedral envelope of an input mesh.


File Polygon_mesh_processing/polyhedral_envelope_mesh_containment.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedral_envelope.h>
#include <CGAL/Polygon_mesh_processing/remesh.h>
#include <CGAL/Surface_mesh.h>
#include <fstream>
int main(int argc, char* argv[])
{
typedef Kernel::Point_3 Point_3;
typedef CGAL::Surface_mesh<Point_3> Surface_mesh;
std::ifstream in((argc>1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off"));
Surface_mesh tmesh;
in >> tmesh;
// remesh the input using the longest edge size as target edge length
Surface_mesh query = tmesh;
Surface_mesh::Edge_iterator longest_edge_it =
std::max_element(edges(query).begin(), edges(query).end(),
[&query](Surface_mesh::Edge_index e1, Surface_mesh::Edge_index e2)
{
return PMP::edge_length(halfedge(e1, query), query) <
PMP::edge_length(halfedge(e2, query), query);
});
PMP::isotropic_remeshing(faces(tmesh), PMP::edge_length(halfedge(*longest_edge_it, query), query), query);
// construct the polyhedral envelope
const double eps = (argc>2) ? std::stod(std::string(argv[2])) : 0.01;
Envelope envelope(tmesh, eps);
// check is the remeshed version is inside the polyhedral envelope of the input mesh
if ( envelope(query) )
std::cout << "Remeshing is inside the polyhedral envelope\n";
else
std::cout << "Remeshing is not inside the polyhedral envelope\n";
std::ofstream("remeshed.off") << query;
return 0;
}

Shape Predicates

Badly shaped or, even worse, completely degenerate elements of a polygon mesh are problematic in many algorithms which one might want to use on the mesh. This package offers a toolkit of functions to detect such undesirable elements.

Surface Location Functions

To ease the manipulation of points on a surface, CGAL offers a multitude of functions based upon a different representation of a point on a polygon mesh: the point is represented as a pair of a face of the polygon mesh and a triplet of barycentric coordinates. This definition enables a robust handling of polylines between points living in the same face: for example, two 3D segments created by four points within the same face that should intersect might not actually intersect due to inexact computations. However, manipulating these same points through their barycentric coordinates can instead be done, and intersections computed in the barycentric space will not suffer from the same issues. Furthermore, this definition is only dependent on the intrinsic dimension of the surface (i.e. 2) and not on the ambient dimension within which the surface is embedded.

The functions of the group Location Functions offer the following functionalities: location computations (CGAL::Polygon_mesh_processing::locate(), and similar) given a point, finding the nearest point on a mesh given a point or a ray (CGAL::Polygon_mesh_processing::locate_with_AABB_tree(), and similar), and location-based predicates (for example, CGAL::Polygon_mesh_processing::is_on_face_border()).

The example Polygon_mesh_processing/locate_example.cpp presents a few of these functions.

Orientation

This package offers multiple functions to compute consistent face orientations for set of faces (Section Polygon Soups) and polygon meshes (Section Polygon Meshes). Section Orientation Examples offers an example of combination of these functions.

Polygon Soups

When the faces of a polygon mesh are given but the connectivity is unknown, this set of faces is called a polygon soup.

Before running any of the algorithms on a polygon soup, one should ensure that the polygons are consistently oriented. To do so, this package provides the function CGAL::Polygon_mesh_processing::orient_polygon_soup(), described in [1].

To deal with polygon soups that cannot be converted to a combinatorially manifold surface, some points must be duplicated. Because a polygon soup does not have any connectivity (each point has as many occurrences as the number of polygons it belongs to), duplicating one point (or a pair of points) amounts to duplicating the polygon to which it belongs. The duplicated points are either an endpoint of an edge incident to more than two polygons, an endpoint of an edge between two polygons with incompatible orientations (during the re-orientation process), or more generally a point p at which the intersection of an infinitesimally small ball centered at p with the polygons incident to it is not a topological disk.

Once the polygon soup is consistently oriented, with possibly duplicated (or more) points, the connectivity can be recovered and made consistent to build a valid polygon mesh. The function CGAL::Polygon_mesh_processing::polygon_soup_to_polygon_mesh() performs this mesh construction step.

Inversely, a polygon soup can be constructed from a polygon mesh, using the function CGAL::Polygon_mesh_processing::polygon_mesh_to_polygon_soup().

Polygon Meshes

This package provides functions dealing with the orientation of faces in a closed polygon mesh.

Orientation Examples

This example shows how to generate a mesh from a polygon soup. The first step is to get a soup of consistently oriented faces, before rebuilding the connectivity. In this example, some orientation tests are performed on the output polygon mesh to illustrate Section Orientation.


File Polygon_mesh_processing/orient_polygon_soup_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/Polyhedron_items_with_id_3.h>
#include <CGAL/Polygon_mesh_processing/orient_polygon_soup.h>
#include <CGAL/Polygon_mesh_processing/polygon_soup_to_polygon_mesh.h>
#include <CGAL/Polygon_mesh_processing/orientation.h>
#include <CGAL/IO/polygon_soup_io.h>
#include <vector>
#include <fstream>
#include <iostream>
// Optional visitor for orientating a polygon soup to demonstrate usage for some functions.
// inherits from the default class as some functions are not overloaded
{
void non_manifold_edge(std::size_t id1, std::size_t id2, std::size_t nb_poly)
{
std::cout << "The edge " << id1 << ", " << id2 << " is not manifold: " << nb_poly << " incident polygons." << std::endl;
}
void non_manifold_vertex(std::size_t id, std::size_t nb_cycles)
{
std::cout << "The vertex " << id << " is not manifold: " << nb_cycles << " connected components of vertices in the link." << std::endl;
}
void duplicated_vertex(std::size_t v1, std::size_t v2)
{
std::cout << "The vertex " << v1 << " has been duplicated, its new id is " << v2 << "." << std::endl;
}
void vertex_id_in_polygon_replaced(std::size_t p_id, std::size_t i1, std::size_t i2)
{
std::cout << "In the polygon " << p_id << ", the index " << i1 << " has been replaced by " << i2 << "." << std::endl;
}
void polygon_orientation_reversed(std::size_t p_id)
{
std::cout << "The polygon " << p_id << " has been reversed." << std::endl;
}
};
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/tet-shuffled.off");
std::vector<K::Point_3> points;
std::vector<std::vector<std::size_t> > polygons;
if(!CGAL::IO::read_polygon_soup(filename, points, polygons) || points.empty())
{
std::cerr << "Cannot open file " << std::endl;
return EXIT_FAILURE;
}
Visitor visitor;
CGAL::Polygon_mesh_processing::orient_polygon_soup(points, polygons, CGAL::parameters::visitor(visitor));
Polyhedron mesh;
// Number the faces because 'orient_to_bound_a_volume' needs a face <--> index map
int index = 0;
for(Polyhedron::Face_iterator fb=mesh.facets_begin(), fe=mesh.facets_end(); fb!=fe; ++fb)
fb->id() = index++;
if(CGAL::is_closed(mesh))
std::ofstream out("tet-oriented1.off");
out.precision(17);
out << mesh;
out.close();
std::ofstream out2("tet-oriented2.off");
out2.precision(17);
out2 << mesh;
out2.close();
return EXIT_SUCCESS;
}

This example shows how to correctly repair and orient a soup to get a mesh from a reference :


File Polygon_mesh_processing/orientation_pipeline_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/orientation.h>
#include <CGAL/Polygon_mesh_processing/polygon_soup_to_polygon_mesh.h>
#include <CGAL/Polygon_mesh_processing/orient_polygon_soup_extension.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/algorithm.h>
#include <CGAL/Timer.h>
#include <CGAL/IO/polygon_soup_io.h>
#include <algorithm>
#include <cstdlib>
#include <fstream>
#include <iostream>
typedef K::Point_3 Point_3;
int main(int argc, char** argv)
{
const std::string input_filename = (argc < 2) ? CGAL::data_file_path("meshes/blobby-shuffled.off") : argv[1];
const std::string reference_filename = (argc < 2) ? CGAL::data_file_path("meshes/blobby.off") : argv[2];
std::vector<Point_3> points;
std::vector<std::vector<std::size_t> > polygons;
if(!CGAL::IO::read_polygon_soup(input_filename, points, polygons) ||
points.size() == 0 || polygons.size() == 0)
{
std::cerr << "Error: can not read input file.\n";
return 1;
}
Mesh ref1;
if(!PMP::IO::read_polygon_mesh(reference_filename, ref1))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
std::cout << "Is the soup a polygon mesh ? : " << PMP::is_polygon_soup_a_polygon_mesh(polygons) << std::endl;
PMP::orient_triangle_soup_with_reference_triangle_mesh<CGAL::Sequential_tag>(ref1, points, polygons);
std::cout << "And now ? : " << PMP::is_polygon_soup_a_polygon_mesh(polygons) << std::endl;
std::cout << "And now ? : " << PMP::is_polygon_soup_a_polygon_mesh(polygons) << std::endl;
Mesh poly;
PMP::polygon_soup_to_polygon_mesh(points, polygons, poly);
typedef boost::property_map<Mesh, CGAL::dynamic_face_property_t<std::size_t> >::type Fccmap;
Fccmap fccmap = get(CGAL::dynamic_face_property_t<std::size_t>(), poly);
std::cout << PMP::connected_components(poly, fccmap) << " CCs before merge." << std::endl;
std::cout<<PMP::connected_components(poly, fccmap) << " remaining CCs." << std::endl;
return 0;
}

Combinatorial Repairing

Polygon Soup Repairing

To ensure that a polygon soup can be oriented (see Section Polygon Soups) and transformed into a workable polygon mesh, it might be necessary to preprocess the data to remove combinatorial and geometrical errors. This package offers the following functions:

as well as the function CGAL::Polygon_mesh_processing::repair_polygon_soup(), which bundles the previous functions and an additional handful of repairing techniques to obtain an as-clean-as-possible polygon soup.

Stitching

When handling polygon meshes, it might happen that a mesh has several edges and vertices that are duplicated. For those edges and vertices, the connectivity of the mesh is incomplete, if not considered incorrect.

Stitching the borders of a polygon mesh can be done to fix some of the duplication. It consists in two main steps. First, border edges that are geometrically identical but duplicated are detected and paired. Then, they are "stitched" together so that edges and vertices duplicates are removed from the mesh, and each of these remaining edges is incident to exactly two faces.

The functions CGAL::Polygon_mesh_processing::stitch_boundary_cycle(), CGAL::Polygon_mesh_processing::stitch_boundary_cycles(), and CGAL::Polygon_mesh_processing::stitch_borders() can perform such repairing operations: the first two functions can be used to stitch halfedges that are part of the same boundary(ies), whereas the third function is more generic and can also stitch halfedges that live on different borders.

The input mesh should be manifold; otherwise, stitching is not guaranteed to succeed.

Stitching Example

The following example applies the stitching operation to a simple quad mesh with duplicated border edges.


File Polygon_mesh_processing/stitch_borders_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/Polygon_mesh_processing/stitch_borders.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <iostream>
#include <fstream>
typedef CGAL::Polyhedron_3<K> Polyhedron;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/quads_to_stitch.off");
Polyhedron mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
std::cout << "Before stitching : " << std::endl;
std::cout << "\t Number of vertices :\t" << mesh.size_of_vertices() << std::endl;
std::cout << "\t Number of halfedges :\t" << mesh.size_of_halfedges() << std::endl;
std::cout << "\t Number of facets :\t" << mesh.size_of_facets() << std::endl;
std::cout << "Stitching done : " << std::endl;
std::cout << "\t Number of vertices :\t" << mesh.size_of_vertices() << std::endl;
std::cout << "\t Number of halfedges :\t" << mesh.size_of_halfedges() << std::endl;
std::cout << "\t Number of facets :\t" << mesh.size_of_facets() << std::endl;
CGAL::IO::write_polygon_mesh("mesh_stitched.off", mesh, CGAL::parameters::stream_precision(17));
return 0;
}

Polygon Mesh Manifoldness

This package offers repairing methods to clean ill-formed polygon soups, see Section Combinatorial Repairing.

Non-manifold vertices can be detected using the function CGAL::Polygon_mesh_processing::is_non_manifold_vertex(). The function CGAL::Polygon_mesh_processing::duplicate_non_manifold_vertices() can be used to attempt to create a combinatorially manifold surface mesh by splitting any non-manifold vertex into as many vertices as there are manifold sheets at this geometric position. Note however that the mesh will still not be manifold from a geometric point of view, as the positions of the new vertices introduced at a non-manifold vertex are identical to the input non-manifold vertex.

Manifoldness Repair Example

In the following example, a non-manifold configuration is artifically created and fixed with the help of the functions described above.


File Polygon_mesh_processing/manifoldness_repair_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/repair.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/boost/graph/iterator.h>
#include <fstream>
#include <iostream>
#include <iterator>
#include <vector>
namespace NP = CGAL::parameters;
typedef boost::graph_traits<Mesh>::vertex_descriptor vertex_descriptor;
typedef boost::graph_traits<Mesh>::halfedge_descriptor halfedge_descriptor;
void merge_vertices(vertex_descriptor v_keep, vertex_descriptor v_rm, Mesh& mesh)
{
std::cout << "merging vertices " << v_keep << " and " << v_rm << std::endl;
for(halfedge_descriptor h : CGAL::halfedges_around_target(v_rm, mesh))
set_target(h, v_keep, mesh); // to ensure that no halfedge points at the deleted vertex
remove_vertex(v_rm, mesh);
}
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh) || CGAL::is_empty(mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
// Artificially create non-manifoldness for the sake of the example by merging some vertices
vertex_descriptor v0 = *(vertices(mesh).begin());
vertex_descriptor v1 = *(--(vertices(mesh).end()));
merge_vertices(v0, v1, mesh);
// Count non manifold vertices
int counter = 0;
for(vertex_descriptor v : vertices(mesh))
{
{
std::cout << "vertex " << v << " is non-manifold" << std::endl;
++counter;
}
}
std::cout << counter << " non-manifold occurrence(s)" << std::endl;
// Fix manifoldness by splitting non-manifold vertices
std::vector<std::vector<vertex_descriptor> > duplicated_vertices;
std::size_t new_vertices_nb = PMP::duplicate_non_manifold_vertices(mesh,
NP::output_iterator(
std::back_inserter(duplicated_vertices)));
std::cout << new_vertices_nb << " vertices have been added to fix mesh manifoldness" << std::endl;
for(std::size_t i=0; i<duplicated_vertices.size(); ++i)
{
std::cout << "Non-manifold vertex " << duplicated_vertices[i].front() << " was fixed by creating";
for(std::size_t j=1; j<duplicated_vertices[i].size(); ++j)
std::cout << " " << duplicated_vertices[i][j];
std::cout << std::endl;
}
return EXIT_SUCCESS;
}

Duplicated Vertices in Boundary Cycles

Similarly to the problematic configuration described in the previous section, another issue that can be present in a polygon mesh is the occurrence of a "pinched" hole, that is the configuration where, when starting from a border halfedge and walking the halfedges of this border, a geometric position appears more than once (although, with different vertices) before reaching the initial border halfedge again. The functions CGAL::Polygon_mesh_processing::merge_duplicated_vertices_in_boundary_cycle() and CGAL::Polygon_mesh_processing::merge_duplicated_vertices_in_boundary_cycle(), which merge vertices at identical positions, can be used to repair this configuration.

Computing Normals

This package provides methods to compute normals on the polygon mesh. The normal can either be computed for each single face, or estimated for each vertex, as the average of its incident face normals. These computations are performed with :

Furthermore, we provide functions to compute all the normals to faces, or to vertices, or to both :

Property maps are used to record the computed normals.

Normals Computation Examples

Property maps are an API introduced in the boost library that allows to associate values to keys. In the following examples we associate a normal vector to each vertex and to each face.

Normals Computation for a Surface Mesh

The following example illustrates how to compute the normals to faces and vertices and store them in property maps provided by the class Surface_mesh.


File Polygon_mesh_processing/compute_normals_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/compute_normal.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <fstream>
#include <iostream>
typedef K::Point_3 Point;
typedef K::Vector_3 Vector;
typedef CGAL::Surface_mesh<Point> Surface_mesh;
typedef boost::graph_traits<Surface_mesh>::vertex_descriptor vertex_descriptor;
typedef boost::graph_traits<Surface_mesh>::face_descriptor face_descriptor;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/eight.off");
Surface_mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
auto vnormals = mesh.add_property_map<vertex_descriptor, Vector>("v:normals", CGAL::NULL_VECTOR).first;
auto fnormals = mesh.add_property_map<face_descriptor, Vector>("f:normals", CGAL::NULL_VECTOR).first;
PMP::compute_normals(mesh, vnormals, fnormals);
std::cout << "Vertex normals :" << std::endl;
for(vertex_descriptor vd: vertices(mesh))
std::cout << vnormals[vd] << std::endl;
std::cout << "Face normals :" << std::endl;
for(face_descriptor fd: faces(mesh))
std::cout << fnormals[fd] << std::endl;
return 0;
}

Normals Computation for a Polyhedron_3

The following example illustrates how to compute the normals to faces and vertices and store them in ordered or unordered maps as the class Polyhedron_3 does not provide storage for the normals.


File Polygon_mesh_processing/compute_normals_example_Polyhedron.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/Polygon_mesh_processing/compute_normal.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
// #include <CGAL/Unique_hash_map.h>
// #include <boost/unordered_map.hpp>
#include <boost/property_map/property_map.hpp>
#include <iostream>
#include <fstream>
#include <map>
typedef K::Point_3 Point;
typedef K::Vector_3 Vector;
typedef CGAL::Polyhedron_3<K> Polyhedron;
typedef boost::graph_traits<Polyhedron>::vertex_descriptor vertex_descriptor;
typedef boost::graph_traits<Polyhedron>::face_descriptor face_descriptor;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/eight.off");
Polyhedron mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
std::map<face_descriptor,Vector> fnormals;
std::map<vertex_descriptor,Vector> vnormals;
// Instead of std::map you may use std::unordered_map, boost::unordered_map
// or CGAL::Unique_hash_map
// CGAL::Unique_hash_map<face_descriptor,Vector> fnormals;
// boost::unordered_map<vertex_descriptor,Vector> vnormals;
PMP::compute_normals(mesh, boost::make_assoc_property_map(vnormals),
boost::make_assoc_property_map(fnormals));
std::cout << "Face normals :" << std::endl;
for(face_descriptor fd: faces(mesh))
std::cout << fnormals[fd] << std::endl;
std::cout << "Vertex normals :" << std::endl;
for(vertex_descriptor vd: vertices(mesh))
std::cout << vnormals[vd] << std::endl;
return 0;
}

Slicer

The CGAL::Polygon_mesh_slicer is an operator that intersects a triangle surface mesh with a plane. It records the intersection as a set of polylines since the intersection can be made of more than one connected component. The degenerate case where the intersection is a single point is handled.

Figure 66.15 shows the polylines returned by the slicing operation for a triangle mesh and a set of parallel planes.

slicer.jpg
Figure 66.15 Slicing a mesh. A triangle mesh (left) and the polylines computed by the mesh slicer by intersecting a set of parallel planes (right).

Slicer Example

The example below illustrates how to use the mesh slicer for a given triangle mesh and a plane. Two constructors are used in the example for pedagogical purposes.


File Polygon_mesh_processing/mesh_slicer_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_slicer.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/AABB_halfedge_graph_segment_primitive.h>
#include <CGAL/AABB_tree.h>
#include <CGAL/AABB_traits.h>
#include <fstream>
typedef std::vector<K::Point_3> Polyline_type;
typedef std::list<Polyline_type> Polylines;
typedef CGAL::AABB_traits<K, HGSP> AABB_traits;
typedef CGAL::AABB_tree<AABB_traits> AABB_tree;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/eight.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh) || CGAL::is_empty(mesh) || !CGAL::is_triangle_mesh(mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
// Slicer constructor from the mesh
Polylines polylines;
slicer(K::Plane_3(0, 0, 1, -0.4), std::back_inserter(polylines));
std::cout << "At z = 0.4, the slicer intersects "
<< polylines.size() << " polylines" << std::endl;
polylines.clear();
slicer(K::Plane_3(0, 0, 1, 0.2), std::back_inserter(polylines));
std::cout << "At z = -0.2, the slicer intersects "
<< polylines.size() << " polylines" << std::endl;
polylines.clear();
// Use the Slicer constructor from a pre-built AABB_tree
AABB_tree tree(edges(mesh).first, edges(mesh).second, mesh);
CGAL::Polygon_mesh_slicer<Mesh, K> slicer_aabb(mesh, tree);
slicer_aabb(K::Plane_3(0, 0, 1, -0.4), std::back_inserter(polylines));
std::cout << "At z = 0.4, the slicer intersects "
<< polylines.size() << " polylines" << std::endl;
polylines.clear();
return 0;
}

Connected Components

This package provides functions to enumerate and store the connected components of a polygon mesh. The connected components can be either closed and geometrically separated, or separated by border or user-specified constraint edges.

First, the function CGAL::Polygon_mesh_processing::connected_component() collects all the faces that belong to the same connected component as the face that is given as a parameter.

Then, CGAL::Polygon_mesh_processing::connected_components() collects all the connected components, and fills a property map with the indices of the different connected components.

The functions CGAL::Polygon_mesh_processing::keep_connected_components() and CGAL::Polygon_mesh_processing::remove_connected_components() enable the user to keep and remove only a selection of connected components, provided either as a range of faces that belong to the desired connected components or as a range of connected component ids (one or more per connected component).

When a triangle mesh has no boundary, it partitions the 3D space in different volumes. The function CGAL::Polygon_mesh_processing::volume_connected_components() can be used to assign to each face an id per volume defined by the surface connected components.

Finally, it can be useful to quickly remove some connected components, for example for noisy data where small connected components should be discarded in favor of major connected components. The function CGAL::Polygon_mesh_processing::keep_largest_connected_components() enables the user to keep only a given number from the largest connected components. The size of a connected component is given by the sum of the sizes of the faces it contains; by default, the size of a face is 1 and thus the size of a connected component is equal to the number of faces it contains. However, it is also possible to pass a face size map, such that the size of the face is its area, for example. Similarly to the previous function, the function CGAL::Polygon_mesh_processing::keep_large_connected_components() can be used to discard all connected components whose size is below a user-defined threshold.

Also, the function CGAL::Polygon_mesh_processing::split_connected_components() enables the user to split the connected components of a polygon mesh in as many polygon meshes.

Connected Components Example

The first example shows how to record the connected components of a polygon mesh. In particular, we provide an example for the optional parameter EdgeConstraintMap, a property map that returns information about an edge being a constraint or not. A constraint provides a mean to demarcate the border of a connected component, and prevents the propagation of a connected component index to cross it.


File Polygon_mesh_processing/connected_components_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/connected_components.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <boost/iterator/function_output_iterator.hpp>
#include <boost/property_map/property_map.hpp>
#include <iostream>
#include <fstream>
#include <map>
typedef Kernel::Point_3 Point;
typedef Kernel::Compare_dihedral_angle_3 Compare_dihedral_angle_3;
template <typename G>
struct Constraint
{
typedef typename boost::graph_traits<G>::edge_descriptor edge_descriptor;
typedef boost::readable_property_map_tag category;
typedef bool value_type;
typedef bool reference;
typedef edge_descriptor key_type;
Constraint()
:g_(NULL)
{}
Constraint(G& g, double bound)
: g_(&g), bound_(bound)
{}
value_type operator[](edge_descriptor e) const
{
const G& g = *g_;
return compare_(g.point(source(e, g)),
g.point(target(e, g)),
g.point(target(next(halfedge(e, g), g), g)),
g.point(target(next(opposite(halfedge(e, g), g), g), g)),
bound_) == CGAL::SMALLER;
}
friend inline
value_type get(const Constraint& m, const key_type k)
{
return m[k];
}
const G* g_;
Compare_dihedral_angle_3 compare_;
double bound_;
};
template <typename PM>
struct Put_true
{
Put_true(const PM pm)
:pm(pm)
{}
template <typename T>
void operator()(const T& t)
{
put(pm, t, true);
}
PM pm;
};
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby_3cc.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
typedef boost::graph_traits<Mesh>::face_descriptor face_descriptor;
const double bound = std::cos(0.75 * CGAL_PI);
std::vector<face_descriptor> cc;
face_descriptor fd = *faces(mesh).first;
mesh,
std::back_inserter(cc));
std::cerr << "Connected components without edge constraints" << std::endl;
std::cerr << cc.size() << " faces in the CC of " << fd << std::endl;
// Instead of writing the faces into a container, you can set a face property to true
typedef Mesh::Property_map<face_descriptor, bool> F_select_map;
F_select_map fselect_map =
mesh.add_property_map<face_descriptor, bool>("f:select", false).first;
mesh,
boost::make_function_output_iterator(Put_true<F_select_map>(fselect_map)));
std::cerr << "\nConnected components with edge constraints (dihedral angle < 3/4 pi)" << std::endl;
Mesh::Property_map<face_descriptor, std::size_t> fccmap =
mesh.add_property_map<face_descriptor, std::size_t>("f:CC").first;
std::size_t num = PMP::connected_components(mesh,
fccmap,
PMP::parameters::edge_is_constrained_map(Constraint<Mesh>(mesh, bound)));
std::cerr << "- The graph has " << num << " connected components (face connectivity)" << std::endl;
typedef std::map<std::size_t/*index of CC*/, unsigned int/*nb*/> Components_size;
Components_size nb_per_cc;
for(face_descriptor f : faces(mesh)){
nb_per_cc[ fccmap[f] ]++;
}
for(const Components_size::value_type& cc : nb_per_cc){
std::cout << "\t CC #" << cc.first
<< " is made of " << cc.second << " faces" << std::endl;
}
std::cerr << "- We keep only components which have at least 4 faces" << std::endl;
4,
PMP::parameters::edge_is_constrained_map(Constraint<Mesh>(mesh, bound)));
std::cerr << "- We keep the two largest components" << std::endl;
2,
PMP::parameters::edge_is_constrained_map(Constraint<Mesh>(mesh, bound)));
return 0;
}

The second example shows how to use the class template Face_filtered_graph which enables to treat one or several connected components as a face graph.


File Polygon_mesh_processing/face_filtered_graph_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/connected_components.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <CGAL/boost/graph/Face_filtered_graph.h>
#include <boost/property_map/property_map.hpp>
#include <iostream>
#include <fstream>
#include <map>
typedef Kernel::Point_3 Point;
typedef boost::graph_traits<Mesh>::face_descriptor face_descriptor;
typedef boost::graph_traits<Mesh>::faces_size_type faces_size_type;
typedef Mesh::Property_map<face_descriptor, faces_size_type> FCCmap;
typedef CGAL::Face_filtered_graph<Mesh> Filtered_graph;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/blobby_3cc.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
FCCmap fccmap = mesh.add_property_map<face_descriptor, faces_size_type>("f:CC").first;
faces_size_type num = PMP::connected_components(mesh,fccmap);
std::cerr << "- The graph has " << num << " connected components (face connectivity)" << std::endl;
std::cout << "The faces in component 0 are:" << std::endl;
Filtered_graph ffg(mesh, 0, fccmap);
for(boost::graph_traits<Filtered_graph>::face_descriptor f : faces(ffg))
std::cout << f << std::endl;
if(num > 1)
{
std::vector<faces_size_type> components;
components.push_back(0);
components.push_back(1);
std::cout << "The faces in components 0 and 1 are:" << std::endl;
ffg.set_selected_faces(components, fccmap);
for(Filtered_graph::face_descriptor f : faces(ffg))
std::cout << f << std::endl;
}
return 0;
}

Hausdorff Distance

This package provides methods to compute (approximate) distances between meshes and point sets.

Approximate Hausdorff Distance

The function approximate_Hausdorff_distance() computes an approximation of the Hausdorff distance from a mesh tm1 to a mesh tm2. Given a a sampling of tm1, it computes the distance to tm2 of the farthest sample point to tm2 [5]. The symmetric version (approximate_symmetric_Hausdorff_distance()) is the maximum of the two non-symmetric distances. Internally, points are sampled using sample_triangle_mesh() and the distance to each sample point is computed using max_distance_to_triangle_mesh(). The quality of the approximation depends on the quality of the sampling and the runtime depends on the number of sample points. Three sampling methods with different parameters are provided (see Figure 66.16).

pmp_sampling_bunny.jpg
Figure 66.16 Sampling of a triangle mesh using different sampling methods. From left to right: (a) Grid sampling, (b) Monte-Carlo sampling with fixed number of points per face and per edge, (c) Monte-Carlo sampling with a number of points proportional to the area/length, and (d) Uniform random sampling. The four pictures represent the sampling on the same portion of a mesh, parameters were adjusted so that the total number of points sampled in faces (blue points) and on edges (red points) are roughly the same. Note that when using the random uniform sampling some faces/edges may not contain any point, but this method is the only one that allows to exactly match a given number of points.

The function approximate_max_distance_to_point_set() computes an approximation of the Hausdorff distance from a mesh to a point set. For each triangle, a lower and upper bound of the Hausdorff distance to the point set are computed. Triangles are refined until the difference between the bounds is lower than a user-defined precision threshold.

Approximate Hausdorff Distance Example

In the following example, a mesh is isotropically remeshed and the approximate distance between the input and the output is computed.


File Polygon_mesh_processing/hausdorff_distance_remeshing_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/distance.h>
#include <CGAL/Polygon_mesh_processing/remesh.h>
#define TAG CGAL::Parallel_if_available_tag
typedef K::Point_3 Point;
int main(int, char**)
{
Mesh tm1, tm2;
CGAL::make_tetrahedron(Point(.0,.0,.0),
Point(2,.0,.0),
Point(1,1,1),
Point(1,.0,2),
tm1);
tm2 = tm1;
std::cout << "Approximated Hausdorff distance: "
<TAG>(tm1, tm2, PMP::parameters::number_of_points_per_area_unit(4000))
<< std::endl;
return 0;
}

Max Distance Between Point Set and Surface Example

In Poisson_surface_reconstruction_3/poisson_reconstruction_example.cpp, a triangulated surface mesh is constructed from a point set using the Poisson reconstruction algorithm , and the distance between the point set and the reconstructed surface is computed with the following code:

// computes the approximation error of the reconstruction
double max_dist =
(output_mesh,
CGAL::make_range (boost::make_transform_iterator
boost::make_transform_iterator
4000);
std::cout << "Max distance to point_set: " << max_dist << std::endl;

Bounded Hausdorff Distance

The function CGAL::Polygon_mesh_processing::bounded_error_Hausdorff_distance() computes an estimate of the Hausdorff distance of two triangle meshes which is bounded by a user-given error bound. Given two meshes tm1 and tm2, it follows the procedure given by [10]. Namely, a bounded volume hierarchy (BVH) is built on tm1 and tm2 respectively. The BVH on tm1 is used to iterate over all triangles in tm1. Throughout the traversal, the procedure keeps track of a global lower and upper bound on the Hausdorff distance respectively. For each triangle t in tm1, by traversing the BVH on tm2, it is estimated via the global bounds whether t can still contribute to the actual Hausdorff distance. From this process, a set of candidate triangles is selected.

The candidate triangles are subsequently subdivided and for each smaller triangle, the BVH on tm2 is traversed again. This is repeated until the triangle is smaller than the user-given error bound, all vertices of the triangle are projected onto the same triangle in tm2, or the triangle's upper bound is lower than the global lower bound. After creation, the subdivided triangles are added to the list of candidate triangles. Thereby, all candidate triangles are processed until a triangle is found in which the Hausdorff distance is realized or in which it is guaranteed to be realized within the user-given error bound.

In the current implementation, the BVH used is an AABB-tree and not the swept sphere volumes as used in the original implementation. This should explain the runtime difference observed with the original implementation.

The function CGAL::Polygon_mesh_processing::bounded_error_Hausdorff_distance() computes the one-sided Hausdorff distance from tm1 to tm2. This component also provides the symmetric distance CGAL::Polygon_mesh_processing::bounded_error_symmetric_Hausdorff_distance() and an utility function called CGAL::Polygon_mesh_processing::is_Hausdorff_distance_larger() that returns true if the Hausdorff distance between two meshes is larger than the user-defined max distance.

Bounded Hausdorff Distance Example

In the following examples: (a) the distance of a tetrahedron to a remeshed version of itself is computed, (b) the distance of two geometries is computed which is realized strictly in the interior of a triangle of the first geometry, (c) a perturbation of a user-given mesh is compared to the original user-given mesh, (d) two user-given meshes are compared, where the second mesh is gradually moved away from the first one.


File Polygon_mesh_processing/hausdorff_bounded_error_distance_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Aff_transformation_3.h>
#include <CGAL/IO/OFF.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/Polygon_mesh_processing/remesh.h>
#include <CGAL/Polygon_mesh_processing/distance.h>
#include <CGAL/Polygon_mesh_processing/transform.h>
using FT = typename Kernel::FT;
using Point_3 = typename Kernel::Point_3;
using Vector_3 = typename Kernel::Vector_3;
using Surface_mesh = CGAL::Surface_mesh<Point_3>;
using Polyhedron = CGAL::Polyhedron_3<Kernel>;
using Affine_transformation_3 = CGAL::Aff_transformation_3<Kernel>;
int main(int argc, char** argv) {
const double error_bound = 1e-4;
const std::string filepath = (argc > 1 ? argv[1] : CGAL::data_file_path("meshes/blobby.off"));
// We create a tetrahedron, remesh it, and compute the distance.
// The expected distance is error_bound.
std::cout << std::endl << "* remeshing tetrahedron example:" << std::endl;
Surface_mesh mesh1, mesh2;
Point_3(0, 0, 0), Point_3(2, 0, 0),
Point_3(1, 1, 1), Point_3(1, 0, 2), mesh1);
mesh2 = mesh1;
using edge_descriptor = typename boost::graph_traits<Surface_mesh>::edge_descriptor;
Surface_mesh::Property_map<edge_descriptor, bool> is_constrained_map =
mesh2.add_property_map<edge_descriptor, bool>("e:is_constrained", true).first;
const double target_edge_length = 0.05;
mesh2.faces(), target_edge_length, mesh2,
PMP::parameters::edge_is_constrained_map(is_constrained_map));
std::cout << "* one-sided bounded-error Hausdorff distance: " <<
PMP::bounded_error_Hausdorff_distance<TAG>(mesh1, mesh2, error_bound) << std::endl;
// We load a mesh, save it in two different containers, and
// translate the second mesh by 1 unit. The expected distance is 1.
std::cout << std::endl << "* moving mesh example:" << std::endl;
Surface_mesh surface_mesh;
CGAL::IO::read_OFF(filepath, surface_mesh);
Polyhedron polyhedron;
CGAL::IO::read_OFF(filepath, polyhedron);
PMP::transform(Affine_transformation_3(CGAL::Translation(),
Vector_3(FT(0), FT(0), FT(1))), polyhedron);
std::cout << "* symmetric bounded-error Hausdorff distance: " <<
PMP::bounded_error_symmetric_Hausdorff_distance<TAG>(surface_mesh, polyhedron, error_bound)
<< std::endl << std::endl;
return EXIT_SUCCESS;
}

Feature Detection

This package provides methods to detect some features of a polygon mesh.

The function CGAL::Polygon_mesh_processing::sharp_edges_segmentation() detects the sharp edges of a polygon mesh and deduces surface patches and vertices incidences. It can be split into three functions : CGAL::Polygon_mesh_processing::detect_sharp_edges(), CGAL::Polygon_mesh_processing::connected_components() and CGAL::Polygon_mesh_processing::detect_vertex_incident_patches(), that respectively detect the sharp edges, compute the patch indices, and give each of pmesh vertices the patch indices of its incident faces.

Feature Detection Example

In the following example, we count how many edges of pmesh are incident to two faces whose normals form an angle smaller than 90 degrees, and the number of surface patches that are separated by these edges.


File Polygon_mesh_processing/detect_features_example.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Surface_mesh.h>
#include <CGAL/Polygon_mesh_processing/detect_features.h>
#include <CGAL/Polygon_mesh_processing/IO/polygon_mesh_io.h>
#include <fstream>
#include <iostream>
typedef boost::graph_traits<Mesh>::face_descriptor face_descriptor;
int main(int argc, char* argv[])
{
const std::string filename = (argc > 1) ? argv[1] : CGAL::data_file_path("meshes/P.off");
Mesh mesh;
if(!PMP::IO::read_polygon_mesh(filename, mesh))
{
std::cerr << "Invalid input." << std::endl;
return 1;
}
typedef boost::property_map<Mesh, CGAL::edge_is_feature_t>::type EIFMap;
typedef boost::property_map<Mesh, CGAL::face_patch_id_t<int> >::type PIMap;
typedef boost::property_map<Mesh, CGAL::vertex_incident_patches_t<int> >::type VIMap;
EIFMap eif = get(CGAL::edge_is_feature, mesh);
PIMap pid = get(CGAL::face_patch_id_t<int>(), mesh);
VIMap vip = get(CGAL::vertex_incident_patches_t<int>(), mesh);
std::size_t number_of_patches
= PMP::sharp_edges_segmentation(mesh, 90, eif, pid,
PMP::parameters::vertex_incident_patches_map(vip));
std::size_t nb_sharp_edges = 0;
for(boost::graph_traits<Mesh>::edge_descriptor e : edges(mesh))
{
if(get(eif, e))
++nb_sharp_edges;
}
std::cout<<"This mesh contains "<<nb_sharp_edges<<" sharp edges"<<std::endl;
std::cout<<" and "<<number_of_patches<<" surface patches."<<std::endl;
return 0;
}

Implementation History

A first version of this package was started by Ilker O. Yaz and Sébastien Loriot. Jane Tournois worked on the finalization of the API, code, and documentation.

A prototype of mesh and shape smoothing was developed during the 2017 edition of the Google Summer of Code by Konstantinos Katrioplas, under supervision of Jane Tournois. It was finalized by Mael Rouxel-Labbé and integrated in CGAL 5.0.

Functionalities related to mesh and polygon soup repair have been introduced steadily over multiple versions since CGAL 4.10, in joint work between Sébastien Loriot and Mael Rouxel-Labbé.

The polyhedral envelope containment check was integrated in CGAL 5.3. The implementation makes use of the version of https://github.com/wangbolun300/fast-envelope available on 7th of October 2020. It only uses the high level algorithm of checking that a query is covered by a set of prisms, where each prism is an offset for an input triangle. That is, the implementation in CGAL does not use indirect predicates.