CGAL 5.6.2 - 2D Straight Skeleton and Polygon Offsetting
Weighted Straight Skeleton Construction Functions

The following functions are used to construct the inward or outward weighted straight skeleton of a polygon.

Functions

template<typename PointIterator , typename HoleIterator , typename WeightIterator , typename HoleWeightsIterator , typename SsK >
boost::shared_ptr< Straight_skeleton_2< SsK > > CGAL::create_interior_weighted_straight_skeleton_2 (PointIterator outer_contour_vertices_begin, PointIterator outer_contour_vertices_end, HoleIterator holes_begin, HoleIterator holes_end, WeightIterator outer_contour_weights_begin, WeightIterator outer_contour_weights_end, HoleWeightsIterator holes_weights_begin, HoleWeightsIterator holes_weights_end, SsK k=CGAL::Exact_predicates_inexact_constructions_kernel())
 creates a weighted straight skeleton in the interior of a 2D polygon with holes. More...
 
template<typename PointIterator , typename WeightIterator , typename SsK >
boost::shared_ptr< Straight_skeleton_2< SsK > > CGAL::create_interior_weighted_straight_skeleton_2 (PointIterator outer_contour_vertices_begin, PointIterator outer_contour_vertices_end, WeightIterator outer_contour_weights_begin, WeightIterator outer_contour_weights_end, SsK k=CGAL::Exact_predicates_inexact_constructions_kernel())
 creates a weighted straight skeleton in the interior of a 2D polygon without holes. More...
 
template<typename InKPolygon , typename InKWeights , typename SsK >
boost::shared_ptr< Straight_skeleton_2< SsK > > CGAL::create_interior_weighted_straight_skeleton_2 (const InKPolygon &polygon, const InKWeights &weights, SsK k=CGAL::Exact_predicates_inexact_constructions_kernel())
 creates a weighted straight skeleton in the interior of a 2D polygon, possibly with holes. More...
 
template<typename FT , typename PointIterator , typename WeightIterator , typename SsK >
boost::shared_ptr< Straight_skeleton_2< SsK > > CGAL::create_exterior_weighted_straight_skeleton_2 (FT max_offset, PointIterator vertices_begin, PointIterator vertices_end, WeightIterator weights_begin, WeightIterator weights_end, SsK k=CGAL::Exact_predicates_inexact_constructions_kernel())
 creates a weighted straight skeleton in the limited exterior of the 2D polygon P given by the point sequence [vertices_begin,vertices_end[. More...
 
template<typename FT , typename Polygon , typename Weights , typename SsK >
boost::shared_ptr< Straight_skeleton_2< SsK > > CGAL::create_exterior_weighted_straight_skeleton_2 (FT max_offset, const InKPolygon &P, const InKWeights &weights, SsK k=CGAL::Exact_predicates_inexact_constructions_kernel())
 creates a weighted straight skeleton in the exterior of a 2D polygon (with holes). More...
 

Function Documentation

◆ create_exterior_weighted_straight_skeleton_2() [1/2]

template<typename FT , typename PointIterator , typename WeightIterator , typename SsK >
boost::shared_ptr< Straight_skeleton_2<SsK> > CGAL::create_exterior_weighted_straight_skeleton_2 ( FT  max_offset,
PointIterator  vertices_begin,
PointIterator  vertices_end,
WeightIterator  weights_begin,
WeightIterator  weights_end,
SsK  k = CGAL::Exact_predicates_inexact_constructions_kernel() 
)

#include <CGAL/create_weighted_straight_skeleton_2.h>

creates a weighted straight skeleton in the limited exterior of the 2D polygon P given by the point sequence [vertices_begin,vertices_end[.

The skeleton in the limited exterior of P is the skeleton in the interior of a polygon Q with P as its hole and a rectangular frame F as outer boundary. The outer boundary F is constructed by enlarging the bounding box of P by a distance d. The distance d is a margin sufficiently large to allow an outer offset at distance max_offset to be obtained from this exterior skeleton, as computed by the function compute_outer_frame_margin().

Weights must be provided in the same order as the vertices of the polygon: the i-th weight in the range is associated to the contour edge between the i-1-th and i-th vertices.

Template Parameters
SsKmust be a model of Kernel.
FTmust be a model of FieldNumberType convertible to SsK::FT.
PointIteratormust be a model of InputIterator with value type InK::Point_2.
WeightIteratormust be a model of InputIterator with value_type InK::FT.
Note
Cartesian_converter and NT_converter are used to convert objects from InK to SsK, if they differ.
Precondition
vertices_begin and vertices_end describe a weakly simple polygon that is oriented counterclockwise.
All the weights must be (strictly) positive.
Collinear consecutive contour edges must have equal weights.
See also
CGAL::create_interior_straight_skeleton_2()
CGAL::Straight_skeleton_builder_2

◆ create_exterior_weighted_straight_skeleton_2() [2/2]

template<typename FT , typename Polygon , typename Weights , typename SsK >
boost::shared_ptr< Straight_skeleton_2<SsK> > CGAL::create_exterior_weighted_straight_skeleton_2 ( FT  max_offset,
const InKPolygon &  P,
const InKWeights &  weights,
SsK  k = CGAL::Exact_predicates_inexact_constructions_kernel() 
)

#include <CGAL/create_weighted_straight_skeleton_2.h>

creates a weighted straight skeleton in the exterior of a 2D polygon (with holes).

The function returns a straight skeleton in the limited exterior of the 2D polygon P. The skeleton in the limited exterior of P is the skeleton in the interior of a polygon Q with P as its hole and a rectangular frame F as outer boundary. The outer boundary F is constructed by enlarging the bounding box of P a distance d. d is a margin sufficiently large to allow an outer offset at distance max_offset to be obtained from this exterior skeleton, as computed by the function compute_outer_frame_margin().

Weights must be provided in the same order as the vertices of the polygon: the i-th weight in the range is associated to the contour edge between the i-1-th and i-th vertices.

Warning
Holes of the polygon P are ignored. If you also need the exterior skeleton for the holes, you should call CGAL::create_interior_straight_skeleton_2() for each hole.
Template Parameters
SsKmust be a model of Kernel.
FTmust be a model of FieldNumberType convertible to SsK::FT.
InKPolygonmust be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
InKWeightsmust be a model of Range whose value type is itself a model of Range with value type InK::FT.
Note
Cartesian_converter and NT_converter are used to convert objects from InK to SsK, if they differ.
Precondition
P is a weakly simple, counterclockwise polygon with clockwise oriented holes.
Holes neither intersect each other nor the outer boundary.
All the weights must be (strictly) positive.
Collinear consecutive contour edges must have equal weights.
max_offset must be positive.
See also
CGAL::create_interior_straight_skeleton_2()
CGAL::Straight_skeleton_builder_2

◆ create_interior_weighted_straight_skeleton_2() [1/3]

template<typename PointIterator , typename HoleIterator , typename WeightIterator , typename HoleWeightsIterator , typename SsK >
boost::shared_ptr< Straight_skeleton_2<SsK> > CGAL::create_interior_weighted_straight_skeleton_2 ( PointIterator  outer_contour_vertices_begin,
PointIterator  outer_contour_vertices_end,
HoleIterator  holes_begin,
HoleIterator  holes_end,
WeightIterator  outer_contour_weights_begin,
WeightIterator  outer_contour_weights_end,
HoleWeightsIterator  holes_weights_begin,
HoleWeightsIterator  holes_weights_end,
SsK  k = CGAL::Exact_predicates_inexact_constructions_kernel() 
)

#include <CGAL/create_weighted_straight_skeleton_2.h>

creates a weighted straight skeleton in the interior of a 2D polygon with holes.

The outer contour is given by the point sequence [outer_contour_vertices_begin, outer_contour_vertices_end] and its holes are given by [holes_begin,holes_end[. Weights of the outer contour are given by [outer_contour_weights_begin, outer_contour_weights_end[, and weights of the holes are given by [holes_weights_begin, holes_weights_end], in the same order as holes appear in the iterator range. Within each weight range, weights are given in the same order as the vertices of the contour: the i-th weight in the range is associated to the contour edge between the i-1-th and i-th vertices.

Template Parameters
PointIteratormust be a model of InputIterator with value type InK::Point_2.
HoleIteratormust be a model of InputIterator with value_type a model of SequenceContainer with value type InK::Point_2.
WeightIteratormust be a model of InputIterator with value_type InK::FT.
HoleWeightsIteratormust be a model of InputIterator with value_type a model of SequenceContainer with value type InK::FT.
SsKmust be a model of Kernel.
Note
Cartesian_converter and NT_converter are used to convert objects from InK to SsK, if they differ.
Precondition
the range [outer_contour_vertices_begin, outer_contour_vertices_end[ describes a weakly simple polygon that is oriented counterclockwise. \pre the range [holes_begin, holes_end[ describes a sequence of weakly simple polygons that are oriented clockwise.
Holes neither intersect each other nor the outer boundary.
All the weights must be (strictly) positive.
Collinear consecutive contour edges must have equal weights.
See also
CGAL::create_exterior_straight_skeleton_2()
CGAL::Straight_skeleton_builder_2

◆ create_interior_weighted_straight_skeleton_2() [2/3]

template<typename PointIterator , typename WeightIterator , typename SsK >
boost::shared_ptr< Straight_skeleton_2<SsK> > CGAL::create_interior_weighted_straight_skeleton_2 ( PointIterator  outer_contour_vertices_begin,
PointIterator  outer_contour_vertices_end,
WeightIterator  outer_contour_weights_begin,
WeightIterator  outer_contour_weights_end,
SsK  k = CGAL::Exact_predicates_inexact_constructions_kernel() 
)

#include <CGAL/create_weighted_straight_skeleton_2.h>

creates a weighted straight skeleton in the interior of a 2D polygon without holes.

The outer contour is given by the point sequence [outer_contour_vertices_begin, outer_contour_vertices_end]. Weights of the outer contour are given by [outer_contour_weights_begin, outer_contour_weights_end], appearing in the same order as the vertices of the contour: the i-th weight in the range is associated to the contour edge between the i-1-th and i-th vertices.

Template Parameters
PointIteratormust be a model of InputIterator with value type InK::Point_2.
WeightIteratormust be a model of InputIterator with value_type InK::FT.
SsKmust be a model of Kernel.
Note
Cartesian_converter and NT_converter are used to convert objects from InK to SsK, if they differ.
Precondition
the range [outer_contour_vertices_begin, outer_contour_vertices_end[ describes a weakly simple polygon that is oriented counterclockwise.
All the weights must be (strictly) positive.
Collinear consecutive contour edges must have equal weights.
See also
CGAL::create_exterior_straight_skeleton_2()
CGAL::Straight_skeleton_builder_2

◆ create_interior_weighted_straight_skeleton_2() [3/3]

template<typename InKPolygon , typename InKWeights , typename SsK >
boost::shared_ptr< Straight_skeleton_2<SsK> > CGAL::create_interior_weighted_straight_skeleton_2 ( const InKPolygon &  polygon,
const InKWeights &  weights,
SsK  k = CGAL::Exact_predicates_inexact_constructions_kernel() 
)

#include <CGAL/create_weighted_straight_skeleton_2.h>

creates a weighted straight skeleton in the interior of a 2D polygon, possibly with holes.

Range of weights weights must be provided in the same order as the contours (i.e., first the weights of the outer boundary, and then the weights of the holes, if there are any). Within each range of weights, the weights must be given in the same order as the vertices of the contour: the i-th weight in the range is associated to the contour edge between the i-1-th and i-th vertices.

Template Parameters
InKPolygonmust be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>), or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
InKWeightsmust be a model of Range whose value type is itself a model of Range with value type InK::FT.
SsKmust be a model of Kernel.
Note
Cartesian_converter and NT_converter are used to convert objects from InK to SsK, if they differ.
Precondition
polygon is a weakly simple, counterclockwise polygon with clockwise oriented holes.
Holes neither intersect each other nor the outer boundary.
All the weights must be (strictly) positive.
Collinear consecutive contour edges must have equal weights.
See also
CGAL::create_exterior_straight_skeleton_2()
CGAL::Straight_skeleton_builder_2