Offset Construction Functions

The following functions are used to construct the inward or outward offsets of a polygon.

Kernel Choices

Up to three different kernels can be used in the offset construction process:

• Input Kernel (InK): This is the kernel type of the input polygons.
• Skeleton Kernel (SsK): This is the kernel used for the construction of the (partial) straight skeleton. It might differ from the Input Kernel for example if the input is based on exact number types, but you wish to speed up the construction of the straight skeleton, using a lighter kernel such as CGAL::Exact_predicates_inexact_constructions_kernel.
• Offset (Output) Kernel (OfK): This is the kernel used for the construction of the offset polygons and is thus the kernel type for the output.

When the kernel differs, CGAL::Cartesian_converter is used to convert from one kernel to the other.

By default, SsK and OfK are chosen as CGAL::Exact_predicates_inexact_constructions_kernel as a compromise between speed and robustness. See also Section Create Offset Polygons from a Polygon (With or Without Holes).

Polygon Return Type

There are two classes of offset construction functions: those that simply return all the offset polygons, and those that also create an arrangement of the polygons to create a polygon with holes. The latter contain _with_holes in the name.

The return type of the offset construction function is thus dediced by whether or not it is a simple polygon or a polygon with holes, and on the dictated output kernel (see Section Kernel Choices). Thus, for an input polygon type InKPolygon in an offset construction that does not arrange polygons (e.g. create_interior_skeleton_and_offset_polygons_2()):

• If the kernel type InK of the input polygon type is different from the output kernel type OfK, then the output polygon type is CGAL::Polygon_2<OfK>.
• If the kernel type InK is equal to the output kernel type OfK, but the input polygon is a polygon with holes (a model of GeneralPolygonWithHoles_2), then the return type is InKPolygon::General_polygon_2.
• If the kernel type InK of the input polygon type is equal to the output kernel type OfK, and the input polygon is a polygon without holes (a model of SequenceContainer with InK::Point_2 value type), then the return type is InKPolygon.

Similarly, if the return type is a polygon with holes (e.g. create_interior_skeleton_and_offset_polygons_with_holes_2(), a similar dispatch exists:

• If the kernel type InK of the input polygon type is different from the output kernel type OfK, then the output polygon type is CGAL::Polygon_with_holes_2<OfK>.
• If the kernel type InK is equal to the output kernel type OfK, but the input polygon is a polygon with holes (a model of GeneralPolygonWithHoles_2), then the return type is InKPolygon.
• If the kernel type InK of the input polygon type is equal to the output kernel type OfK, and the input polygon is a polygon without holes (a model of SequenceContainer with InK::Point_2 value type), then the return type is CGAL::Polygon_with_holes_2<OfK>.

Functions
template<class K , class InputPolygonPtrIterator , class OutputPolygonWithHolesPtrIterator >
bool	CGAL::arrange_offset_polygons_2 (InputPolygonPtrIterator begin, InputPolygonPtrIterator end, OutputPolygonWithHolesPtrIterator out, const K &k)
	The function arrange_offset_polygons_2() arranges the sequence of 2D polygons obtained by create_offset_polygons_2() into 2D polygons with holes by determining geometric parent-hole relationships using a simple algorithm based on the particular characteristics of offset polygons.
template<class InputIterator , class Traits >
std::optional< typename Traits::FT >	CGAL::compute_outer_frame_margin (InputIterator first, InputIterator beyond, typename Traits::FT offset, const Traits &traits=Default_traits)
	computes the separation required between a polygon and the outer frame used to obtain an exterior skeleton suitable for the computation of outer offset polygons at a given distance.
template<typename OfKPolygon , typename FT , typename StraightSkeleton , typename OfK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_offset_polygons_2 (FT offset, const StraightSkeleton &ss, OfK k=Exact_predicates_inexact_constructions_kernel())
	returns a container with the offset polygons at distance offset obtained from the straight skeleton ss.
template<typename OfKPolygon , typename FT , typename InKPolygon , typename HoleIterator , typename OfK , typename SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_interior_skeleton_and_offset_polygons_2 (FT offset, const InKPolygon &outer_boundary, HoleIterator holes_begin, HoleIterator holes_end, OfK ofk=CGAL::Exact_predicates_inexact_constructions_kernel, SsK ssk=CGAL::Exact_predicates_inexact_constructions_kernel())
	returns a container with all the inner offset polygons at distance offset of a 2D polygon with holes.
template<typename OfKPolygon , typename FT , typename InKPolygon , typename OfK , typename SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_interior_skeleton_and_offset_polygons_2 (FT offset, const InKPolygon &poly, OfK ofk=CGAL::Exact_predicates_inexact_constructions_kernel, SsK ssk=CGAL::Exact_predicates_inexact_constructions_kernel())
	returns a container with all the inner offset polygons at distance offset of the 2D polygon poly.
template<typename OfKPolygon , typename FT , typename InKPolygon , typename OfK , typename SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_exterior_skeleton_and_offset_polygons_2 (FT offset, const InKPolygon &poly, OfK ofk=Exact_predicates_inexact_constructions_kernel(), SsK ssk=Exact_predicates_inexact_constructions_kernel())
	returns a container with all the outer offset polygons at distance offset of the 2D polygon poly.
template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2 (FT offset, const InKPolygon &poly_with_holes, OfK ofk=CGAL::Exact_predicates_inexact_constructions_kernel, SsK ssk=CGAL::Exact_predicates_inexact_constructions_kernel)
	returns a container with all the inner offset polygons with holes at distance offset of the 2D polygon with holes poly_with_holes.
template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_exterior_skeleton_and_offset_polygons_with_holes_2 (FT offset, const InKPolygon &poly_with_holes, OfK ofk=Exact_predicates_inexact_constructions_kernel(), SsK ssk=Exact_predicates_inexact_constructions_kernel())
	returns a container with all the outer offset polygons with holes at distance offset of the 2D polygon poly_with_holes.
template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_interior_weighted_skeleton_and_offset_polygons_with_holes_2 (FT offset, const InKPolygon &poly_with_holes, OfK ofk=CGAL::Exact_predicates_inexact_constructions_kernel, SsK ssk=CGAL::Exact_predicates_inexact_constructions_kernel)
	returns a container with all the inner offset polygons with holes at distance offset of the 2D polygon with holes poly_with_holes.
template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >
std::vector< std::shared_ptr< OfKPolygon > >	CGAL::create_exterior_weighted_skeleton_and_offset_polygons_with_holes_2 (FT offset, const InKPolygon &poly_with_holes, OfK ofk=Exact_predicates_inexact_constructions_kernel(), SsK ssk=Exact_predicates_inexact_constructions_kernel())
	returns a container with all the outer offset polygons with holes at distance offset of the 2D polygon poly_with_holes.
template<class Target_skeleton , class Source_skeleton , class Items_converter >
std::shared_ptr< Target_skeleton >	CGAL::convert_straight_skeleton_2 (Source_skeleton const &s, Items_converted const &ic=Items_converter())
	returns a new straight skeleton data structure with the same combinatorial and geometric data as s using the items converter ic to convert the geometric embedding to the types of the target skeleton.

Function Documentation

arrange_offset_polygons_2()

template<class K , class InputPolygonPtrIterator , class OutputPolygonWithHolesPtrIterator >

bool CGAL::arrange_offset_polygons_2	(	InputPolygonPtrIterator	begin,
		InputPolygonPtrIterator	end,
		OutputPolygonWithHolesPtrIterator	out,
		const K &	k
	)

#include <CGAL/arrange_offset_polygons_2.h>

The function arrange_offset_polygons_2() arranges the sequence of 2D polygons obtained by create_offset_polygons_2() into 2D polygons with holes by determining geometric parent-hole relationships using a simple algorithm based on the particular characteristics of offset polygons.

The function determines parent-hole relationships among the polygons given by [begin,end] creating std::shared_ptr< GeneralPolygonWithHoles_2 > objects added to the output sequence given out. A CLOCKWISE oriented polygon H is a hole of a COUNTERCLOCKWISE polygon P, iff at least one vertex of H is ON_BOUNDED_SIDE of P.

This function should not be used to arrange arbitrary polygons into polygons with holes unless they meet the requirements specified below.

Precondition

The input polygons must be simple.

The set of input polygons are unique and interior disjoint. That is, given distinct polygons P and Q, there are vertices of P which are not on the boundary of Q and are all on the bounded or unbounded side of Q (but not both).

Template Parameters

K	must be a model of Kernel.
InputPolygonPtrIterator	must be a model of InputIterator whose value_type is a smart pointer (such as std::shared_ptr) whose element_type is a model of SequenceContainer with value type K::Point_2.
OutputPolygonWithHolesPtrIterator	must be a model of OutputIterator whose value_type is a smart pointer (such as std::shared_ptr) whose element_type is a model of GeneralPolygonWithHoles_2.

Returns

true if no error was encountered, and false otherwise.

See also

CGAL::create_exterior_straight_skeleton_2()

CGAL::Straight_skeleton_builder_2

compute_outer_frame_margin()

template<class InputIterator , class Traits >

std::optional< typename Traits::FT > CGAL::compute_outer_frame_margin	(	InputIterator	first,
		InputIterator	beyond,
		typename Traits::FT	offset,
		const Traits &	traits = Default_traits
	)

#include <CGAL/compute_outer_frame_margin.h>

computes the separation required between a polygon and the outer frame used to obtain an exterior skeleton suitable for the computation of outer offset polygons at a given distance.

Given a non-degenerate strictly-simple 2D polygon whose vertices are passed in the range [first,beyond), calculates the largest euclidean distance d between each input vertex and its corresponding offset vertex at a distance offset.

If such a distance can be approximately computed, returns an optional<FT> with the value d + (offset * 1.05). If the distance cannot be computed, not even approximately, due to overflow for instance, returns an empty optional<FT> (an absent result).

This result is the required separation between the input polygon and the rectangular frame used to construct an exterior offset contour at distance offset (which is done by placing the polygon as a hole of that frame).

Such a separation must be computed in this way because if the frame is too close to the polygon, the inward offset contour from the frame could collide with the outward offset contour of the polygon, resulting in a merged contour offset instead of two contour offsets, one of them corresponding to the frame.

Simply using 2*offset as the separation is incorrect since offset is the distance between an offset line and its original, not between an offset vertex and its original. The later, which is calculated by this function and needed to place the frame sufficiently away from the polygon, can be thousands of times larger than offset.

If the result is absent, any attempt to construct an exterior offset polygon at distance offset will fail. This will occur whenever the polygon has a vertex with an internal angle approaching 0 (because the offset vertex of a vertex whose internal angle equals 0 is at infinity).

The default traits class Default_traits is an instance of the class Polygon_offset_builder_traits_2<Kernel> parameterized on the kernel in which the type InputIterator::value_type is defined.

Template Parameters

Traits	must be a model for PolygonOffsetBuilderTraits_2.
InputIterator	must be a model of InputIterator with value_type equivalent to Traits::Point_2.

Precondition

offset > 0.

The range [first,beyond) contains the vertices of a non-degenerate strictly-simple 2D polygon.

See also

PolygonOffsetBuilderTraits_2

CGAL::Polygon_offset_builder_traits_2<K>

Examples

Straight_skeleton_2/Low_level_API.cpp.

convert_straight_skeleton_2()

template<class Target_skeleton , class Source_skeleton , class Items_converter >

std::shared_ptr< Target_skeleton > CGAL::convert_straight_skeleton_2	(	Source_skeleton const &	s,
		Items_converted const &	ic = Items_converter()
	)

#include <CGAL/Straight_skeleton_converter_2.h>

returns a new straight skeleton data structure with the same combinatorial and geometric data as s using the items converter ic to convert the geometric embedding to the types of the target skeleton.

Template Parameters

Target_skeleton	must be a model of StraightSkeleton_2
Source_skeleton	must be a model of StraightSkeleton_2
Items_converter	must be a model of StraightSkeletonItemsConverter_2

See also

CGAL::Straight_skeleton_items_converter_2<SrcSs,TgtSs,NTCV>

CGAL::Straight_skeleton_converter_2<SrcSs,TgtSs,ItemsCV>

create_exterior_skeleton_and_offset_polygons_2()

template<typename OfKPolygon , typename FT , typename InKPolygon , typename OfK , typename SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_exterior_skeleton_and_offset_polygons_2	(	FT	offset,
		const InKPolygon &	poly,
		OfK	ofk = Exact_predicates_inexact_constructions_kernel(),
		SsK	ssk = Exact_predicates_inexact_constructions_kernel()
	)

#include <CGAL/create_offset_polygons_2.h>

returns a container with all the outer offset polygons at distance offset of the 2D polygon poly.

The exterior skeleton is limited by an outer rectangular frame placed at a margin sufficiently large to allow the offset polygons to be constructed.

Note

A temporary straight skeleton is constructed in the limited exterior of the input polygon to obtain the offsets. The construction of this skeleton is the most expensive operation, therefore, to construct offsets at more than one single distance, use the separate functions create_exterior_straight_skeleton_2() and create_offset_polygons_2() instead.

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
OfKPolygon	is a polygon without holes type determined from OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

Precondition

offset is positive

poly` is weakly simple, counterclockwise polygon.

See also

CGAL::create_interior_skeleton_and_offset_polygons_2()

CGAL::create_exterior_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

Examples

Straight_skeleton_2/Create_skeleton_and_offset_polygons_2.cpp.

create_exterior_skeleton_and_offset_polygons_with_holes_2()

template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_exterior_skeleton_and_offset_polygons_with_holes_2	(	FT	offset,
		const InKPolygon &	poly_with_holes,
		OfK	ofk = Exact_predicates_inexact_constructions_kernel(),
		SsK	ssk = Exact_predicates_inexact_constructions_kernel()
	)

#include <CGAL/create_offset_polygons_from_polygon_with_holes_2.h>

returns a container with all the outer offset polygons with holes at distance offset of the 2D polygon poly_with_holes.

Note that the offset of the outer frame is ignored.

This is equivalent to a call to CGAL::arrange_offset_polygons_2() on the output of create_exterior_skeleton_and_offset_polygons_2(offset, poly_with_holes, ofk, ssk)) after having filtered out the polygon corresponding to the offset of the outer frame and having reversed the orientation of all other polygons.

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
OfKPolygon	is a polygon without holes type determined by OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

See also

CGAL::create_exterior_skeleton_and_offset_polygons_2()

CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

create_exterior_weighted_skeleton_and_offset_polygons_with_holes_2()

template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_exterior_weighted_skeleton_and_offset_polygons_with_holes_2	(	FT	offset,
		const InKPolygon &	poly_with_holes,
		OfK	ofk = Exact_predicates_inexact_constructions_kernel(),
		SsK	ssk = Exact_predicates_inexact_constructions_kernel()
	)

#include <CGAL/create_weighted_offset_polygons_from_polygon_with_holes_2.h>

returns a container with all the outer offset polygons with holes at distance offset of the 2D polygon poly_with_holes.

Note that the offset of the outer frame is ignored.

This is equivalent to a call to CGAL::arrange_offset_polygons_2() on the output of create_exterior_weighted_skeleton_and_offset_polygons_2(offset, poly_with_holes, ofk, ssk)) after having filtered out the polygon corresponding to the offset of the outer frame and having reversed the orientation of all other polygons.

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
OfKPolygon	is a polygon without holes type determined by OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed weighted straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

See also

CGAL::create_exterior_weighted_skeleton_and_offset_polygons_2()

CGAL::create_interior_weighted_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

create_interior_skeleton_and_offset_polygons_2() [1/2]

template<typename OfKPolygon , typename FT , typename InKPolygon , typename HoleIterator , typename OfK , typename SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_interior_skeleton_and_offset_polygons_2	(	FT	offset,
		const InKPolygon &	outer_boundary,
		HoleIterator	holes_begin,
		HoleIterator	holes_end,
		OfK	ofk = CGAL::Exact_predicates_inexact_constructions_kernel,
		SsK	ssk = CGAL::Exact_predicates_inexact_constructions_kernel()
	)

#include <CGAL/create_offset_polygons_2.h>

returns a container with all the inner offset polygons at distance offset of a 2D polygon with holes.

The outer boundary is outer_boundary and its holes are given by [holes_begin,holes_end).

Note

A temporary straight skeleton is constructed in the interior of the input polygon to obtain the offsets. The construction of this skeleton is the most expensive operation, therefore, to construct offsets at more than one single distance, it is advised to use create_interior_straight_skeleton_2() to create the skeleton only once, and then call create_offset_polygons_2() for each distance.

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
HoleIterator	must be a model of InputIterator with value type being a model of ConstRange with value type SsK::Point_2.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>).
OfKPolygon	is a polygon without holes type determined from OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

Precondition

outer_boundary describes a weakly simple, counterclockwise polygon.

[holes_begin,holes_end) is a range of weakly simple, clockwise polygons.

Holes do not intersect each other or the outer boundary.

See also

CGAL::create_exterior_skeleton_and_offset_polygons_2()

CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

Examples

Straight_skeleton_2/Create_saop_from_polygon_with_holes_2.cpp, and Straight_skeleton_2/Create_skeleton_and_offset_polygons_2.cpp.

create_interior_skeleton_and_offset_polygons_2() [2/2]

template<typename OfKPolygon , typename FT , typename InKPolygon , typename OfK , typename SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_interior_skeleton_and_offset_polygons_2	(	FT	offset,
		const InKPolygon &	poly,
		OfK	ofk = CGAL::Exact_predicates_inexact_constructions_kernel,
		SsK	ssk = CGAL::Exact_predicates_inexact_constructions_kernel()
	)

#include <CGAL/create_offset_polygons_2.h>

returns a container with all the inner offset polygons at distance offset of the 2D polygon poly.

Note

A temporary straight skeleton is constructed in the interior of the input polygon to obtain the offsets. The construction of this skeleton is the most expensive operation, therefore, to construct offsets at more than one single distance, it is advised to use create_interior_straight_skeleton_2() to create the skeleton only once, and then call create_offset_polygons_2() for each distance

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
OfKPolygon	is a polygon without holes type determined by OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

Precondition

offset is positive

poly` is weakly simple, counterclockwise polygon.

See also

CGAL::create_exterior_skeleton_and_offset_polygons_2()

CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

create_interior_skeleton_and_offset_polygons_with_holes_2()

template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_interior_skeleton_and_offset_polygons_with_holes_2	(	FT	offset,
		const InKPolygon &	poly_with_holes,
		OfK	ofk = CGAL::Exact_predicates_inexact_constructions_kernel,
		SsK	ssk = CGAL::Exact_predicates_inexact_constructions_kernel
	)

#include <CGAL/create_offset_polygons_from_polygon_with_holes_2.h>

returns a container with all the inner offset polygons with holes at distance offset of the 2D polygon with holes poly_with_holes.

This is equivalent to arrange_offset_polygons_2(create_interior_skeleton_and_offset_polygons_2(offset, poly_with_holes, ofk, ssk)).

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
OfKPolygon	is a polygon without holes type determined by OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

See also

CGAL::create_interior_skeleton_and_offset_polygons_2()

CGAL::create_exterior_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

Examples

Straight_skeleton_2/Create_skeleton_and_offset_polygons_with_holes_2.cpp, and Straight_skeleton_2/Show_offset_polygon.cpp.

create_interior_weighted_skeleton_and_offset_polygons_with_holes_2()

template<class OfKPolygon , class FT , class InKPolygon , class OfK , class SsK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_interior_weighted_skeleton_and_offset_polygons_with_holes_2	(	FT	offset,
		const InKPolygon &	poly_with_holes,
		OfK	ofk = CGAL::Exact_predicates_inexact_constructions_kernel,
		SsK	ssk = CGAL::Exact_predicates_inexact_constructions_kernel
	)

#include <CGAL/create_weighted_offset_polygons_from_polygon_with_holes_2.h>

returns a container with all the inner offset polygons with holes at distance offset of the 2D polygon with holes poly_with_holes.

This is equivalent to arrange_offset_polygons_2(create_interior_weighted_skeleton_and_offset_polygons_2(offset, poly_with_holes, ofk, ssk)).

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
SsK	must be a model of Kernel. It is used to instantiate Straight_skeleton_builder_traits_2<SsK> for constructing the weighted straight skeleton.
FT	must be a model of FieldNumberType convertible to OfK::FT and SsK::FT.
InKPolygon	must be a model of SequenceContainer with value type InK::Point_2 (e.g. Polygon_2<InK>) or a model of GeneralPolygonWithHoles_2 (e.g. Polygon_with_holes_2<InK>).
OfKPolygon	is a polygon without holes type determined by OfK and InKPolygon, see Section Polygon Return Type.

Note

If SsK != OfK the constructed weighted straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

See also

CGAL::create_interior_weighted_skeleton_and_offset_polygons_2()

CGAL::create_exterior_weighted_skeleton_and_offset_polygons_with_holes_2()

Polygon_offset_builder_2

create_offset_polygons_2()

template<typename OfKPolygon , typename FT , typename StraightSkeleton , typename OfK >

std::vector< std::shared_ptr< OfKPolygon > > CGAL::create_offset_polygons_2	(	FT	offset,
		const StraightSkeleton &	ss,
		OfK	k = Exact_predicates_inexact_constructions_kernel()
	)

#include <CGAL/create_offset_polygons_2.h>

returns a container with the offset polygons at distance offset obtained from the straight skeleton ss.

If ss is the interior skeleton of a polygon with holes, the offset polygons will be generated in its interior. If ss is the outer skeleton of a polygon with holes, the offset polygons will be generated in its exterior.

Template Parameters

OfK	must be a model of Kernel. It is used to instantiate Polygon_offset_builder_traits_2<OfK> for constructing the offset polygons.
FT	must be a model of FieldNumberType convertible to OfK::FT.
StraightSkeleton	is an object of type CGAL::Straight_skeleton_2<SsK>.
OfKPolygon	is a polygon without holes type determined from OfK, see Section Polygon Return Type.

Note

If SsK != OfK the constructed straight skeleton is converted to CGAL::Straight_skeleton_2<OfK>.

Precondition

offset is positive.

ss is a valid straight skeleton.

See also

CGAL::create_interior_skeleton_and_offset_polygons_2()

CGAL::create_exterior_skeleton_and_offset_polygons_2()

Polygon_offset_builder_2