Navigation: Up Table of Contents Package Overview Bibliography Index Title Acknowledging CGAL

Chapter 55
2D Placement of Streamlines

Abdelkrim Mebarki

55.1	Definitions
55.2	Fundamental Notions
	55.2.1 Euler Integrator
	55.2.2 Second Order Runge-Kutta Integrator
55.3	Farthest Point Seeding Strategy
55.4	Implementation
55.5	Examples

This chapter describes the Cgal 2D streamline placement package. Basic definitions and notions are given in Section 55.1. Section 55.2 gives a description of the integration process. Section 55.3 provides a brief description of the algorithm. Section 55.4 presents the implementation of the package, and Section 55.5 details two example placements.

Figure 55.1: The core idea of the algorithm is to integrate the streamlines from the center of the biggest empty cavities in the domain (left). A Delaunay triangulation of all the sample points is used to model the streamlines and the spaces within the domain (middle). A final result is shown (right).

55.1 Definitions

In physics, a field is an assignment of a quantity to every point in space. For example, a gravitational field assigns a gravitational potential to each point in space.

Vector and direction fields are commonly used for modeling physical phenomena, where a direction and magnitude, namely a vector is assigned to each point inside a domain (such as the magnitude and direction of the force at each point in a magnetic field).

Streamlines are important tools for visualizing flow fields. A streamline is a curve everywhere tangent to the field. In practice, a streamline is often represented as a polyline (series of points) iteratively elongated by bidirectional numerical integration started from a seed point, until it comes close to another streamline (according to a specified distance called the separating distance), hits the domain boundary, reaches a critical point or generates a closed path.

A valid placement of streamlines consists of saturating the domain with a set of tangential streamlines in accordance with a specified density, determined by the separating distance between the streamlines.

55.2 Fundamental Notions

A streamline can be considered as the path traced by an imaginary massless particle dropped into a steady fluid flow described by the field. The construction of this path consists in the solving an ordinary differential equation for successive time intervals. In this way, we obtain a series of points p_k, 0<k<n which allow visualizing the streamline. The differential equation is defined as follows :

= v(p(t)), p(0) = p₀

where p(t) is the position of the particle at time t, v is a function which assigns a vector value at each point in the domain (possibly by interpolation), and p₀ is the initial position. The position after a given interval Δt is given by :

p(t + Δt) = p(t) + ∫_t^t+Δt v(p(t)) dt

. Several numeric methods have been proposed to solve this equation. In this package, the Euler, and the Second Order Runge-Kutta algorithm are implemented.

55.2.1 Euler Integrator

Figure 55.2: Euler integrator.

This algorithm approximates the point computation by this formula

p_k+1 = p_k + hv(p_k)

where h specifies the integration step (see Figure 55.2). The integration can be done forward (resp. backward) by specifying a positive (resp. negative) integration step h. The streamline is then constructed by successive integration from a seed point both forward and backward.

55.2.2 Second Order Runge-Kutta Integrator

Figure 55.3: Runge-Kutta second order integrator (The empty circle represents the intermediate point, and the gray disk represents the Euler integrated point).

This method introduces an intermediate point p'_k between p_k and p_k+1 to increase the precision of the computation (see Figure 55.3), where:

p'_k

p_k

hv(p_k)

p_k+1

p_k

hv(p'_k)

See [PTVF02] for further details about numerical integration.

55.3 Farthest Point Seeding Strategy

The algorithm implemented in this package [MAD05] consists of placing one streamline at a time by numerical integration starting farthest away from all previously placed streamlines.

The input of our algorithm is given by (i) a flow field, (ii) a density specified either globally, by the inverse of the ideal spacing distance, or locally by a density field, and (iii) a saturation ratio over the desired spacing required to trigger the seeding of a new streamline.

The input flow field is given by a discrete set of vectors or directions sampled within a domain, associated with an interpolation scheme (e.g. bilinear interpolation over a regular grid, or natural neighbor interpolation over an irregular point set to allow for an evaluation at each point coordinate within the domain).

The output is a streamline placement, represented as a list of streamlines. The core idea of our algorithm consists of placing one streamline at a time by numerical integration seeded at the farthest point from all previously placed streamlines.

The streamlines are approximated by polylines, whose points are inserted to a 2D Delaunay triangulation (see figure 55). The empty circumscribed circles of the Delaunay triangles provide us with a good approximation of the cavities in the domain.

After each streamline integration, all incident triangles whose circumcircle diameter is larger (within the saturation ratio) than the desired spacing distance are pushed to a priority queue sorted by the triangle circumcircle diameter. To start each new streamline integration, the triangle with largest circumcircle diameter (and hence the biggest cavity) is popped out of the queue. We first test if it is still a valid triangle of the triangulation, since it could have been destroyed by a streamline previously added to the triangulation. If it is not, we pop another triangle out of the queue. If it is, we use the center of its circumcircle as seed point to integrate a new streamline.

Our algorithm terminates when the priority queue is empty. The size of the biggest cavity being monotonically decreasing, our algorithm guarantees the domain saturation.

55.4 Implementation

Streamlines are represented as polylines, and are obtained by iterative integration from the seed point. A polyline is represented as a range of points. The computation is processed via a list of Delaunay triangulation vertices.

To implement the triangular grid, the Cgal Delaunay_triangulation_2 class is used. The priority queue used to store candidate seed points is taken from the Standard Template Library [Sil97].

55.5 Examples

The first example illustrates the generation of a 2D streamline placement from a vector field defined on a regular grid.

File: examples/Stream_lines_2/stl_regular_field.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Stream_lines_2.h>
#include <CGAL/Runge_kutta_integrator_2.h>
#include <CGAL/Regular_grid_2.h>
#include <CGAL/Triangular_field_2.h>

#include <iostream>
#include <fstream>

typedef CGAL::Exact_predicates_inexact_constructions_kernel         K;
typedef CGAL::Regular_grid_2<K> Field;
typedef CGAL::Runge_kutta_integrator_2<Field> Runge_kutta_integrator;
typedef CGAL::Stream_lines_2<Field, Runge_kutta_integrator> Strl;
typedef Strl::Point_iterator_2 Point_iterator;
typedef Strl::Stream_line_iterator_2 Strl_iterator;
typedef Strl::Point_2 Point_2;
typedef Strl::Vector_2 Vector_2;

int main()
{
  Runge_kutta_integrator runge_kutta_integrator;

  /*data.vec.cin is an ASCII file containing the vector field values*/
  std::ifstream infile("data/vnoise.vec.cin", std::ios::in);
  double iXSize, iYSize;
  unsigned int x_samples, y_samples;
  iXSize = iYSize = 512;
  infile >> x_samples;
  infile >> y_samples;
  Field regular_grid_2(x_samples, y_samples, iXSize, iYSize);
  /*fill the grid with the appropreate values*/
  for (unsigned int i=0;i<x_samples;i++)
    for (unsigned int j=0;j<y_samples;j++)
      {
        double xval, yval;
        infile >> xval;
        infile >> yval;
        regular_grid_2.set_field(i, j, Vector_2(xval, yval));
      }
  infile.close();

  /* the placement of streamlines */
  std::cout << "processing...\n";
  double dSep = 3.5;
  double dRat = 1.6;
  Strl Stream_lines(regular_grid_2, runge_kutta_integrator,dSep,dRat);
  std::cout << "placement generated\n";

  /*writing streamlines to streamlines_on_regular_grid_1.stl */
  std::ofstream fw("streamlines_on_regular_grid_1.stl",std::ios::out);
  fw << Stream_lines.number_of_lines() << "\n";
  for(Strl_iterator sit = Stream_lines.begin(); sit != Stream_lines.end(); sit++)
    {
      fw << "\n";
      for(Point_iterator pit = sit->first; pit != sit->second; pit++){
        Point_2 p = *pit;
        fw << p.x() << " " << p.y() << "\n";
      }
    }

  fw.close();

}

The second example depicts the generation of a streamline placement from a vector field defined on a triangular grid.

File: examples/Stream_lines_2/stl_triangular_field.cpp

#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/Stream_lines_2.h>
#include <CGAL/Runge_kutta_integrator_2.h>
#include <CGAL/Triangular_field_2.h>

#include <iostream>
#include <fstream>

typedef CGAL::Exact_predicates_inexact_constructions_kernel         K;
typedef K::Point_2                                                  Point;
typedef K::Vector_2                                                 Vector;
typedef CGAL::Triangular_field_2<K>                                 Field;
typedef CGAL::Runge_kutta_integrator_2<Field>                       Runge_kutta_integrator;
typedef CGAL::Stream_lines_2<Field, Runge_kutta_integrator>         Strl;
typedef Strl::Stream_line_iterator_2                                stl_iterator;

int main()
{
  Runge_kutta_integrator runge_kutta_integrator(1);

  /*datap.tri.cin and datav.tri.cin are ascii files where are stored the vector velues*/
  std::ifstream inp("data/datap.tri.cin");
  std::ifstream inv("data/datav.tri.cin");
  std::istream_iterator<Point> beginp(inp);
  std::istream_iterator<Vector> beginv(inv);
  std::istream_iterator<Point> endp;

  Field triangular_field(beginp, endp, beginv);

  /* the placement of streamlines */
  std::cout << "processing...\n";
  double dSep = 30.0;
  double dRat = 1.6;
  Strl Stream_lines(triangular_field, runge_kutta_integrator,dSep,dRat);
  std::cout << "placement generated\n";

  /*writing streamlines to streamlines.stl */
  std::cout << "streamlines.stl\n";
  std::ofstream fw("streamlines.stl",std::ios::out);
  Stream_lines.print_stream_lines(fw);
}

Next: Reference Manual