Chapter 16
3D Convex Hulls

Susan Hert and Stefan Schirra

Table of Contents

16.1 Introduction
16.2 Static Convex Hull Construction
   16.2.1   Traits Class
   16.2.2   Convexity Checking
   16.2.3   Example
16.3 Incremental Convex Hull Construction
   16.3.1   Example
16.4 Dynamic Convex Hull Construction
   16.4.1   Example
16.5 Performance

the convex hull of the bimba model
Figure 16.1:  The convex hull of a model made of 192135 points.

16.1   Introduction

A subset S 3 is convex if for any two points p and q in the set the line segment with endpoints p and q is contained in S. The convex hull of a set S is the smallest convex set containing S. The convex hull of a set of points P 3 is a convex polytope with vertices in P. A point in P is an extreme point (with respect to P) if it is a vertex of the convex hull of P. A set of points is said to be strongly convex if it consists of only extreme points.

This chapter describes the functions provided in Cgal for producing convex hulls in three dimensions as well as functions for checking if sets of points are strongly convex are not. One can compute the convex hull of a set of points in three dimensions in one of three ways in Cgal: using a static algorithm, using an incremental construction algorithm, or using a triangulation to get a fully dynamic computation.

16.2   Static Convex Hull Construction

The function convex_hull_3 provides an implementation of the quickhull algorithm [BDH96] for three dimensions . There are two versions of this function available, one that can be used when it is known that the output will be a polyhedron (i.e., there are more than three points and they are not all collinear) and one that handles all degenerate cases and returns a CGAL::Object, which may be a point, a segment, a triangle, or a polyhedron. Both versions accept a range of input iterators defining the set of points whose convex hull is to be computed and a traits class defining the geometric types and predicates used in computing the hull.

16.2.1   Traits Class

The function convex_hull_3 is parameterized by a traits class, which specifies the types and geometric primitives to be used in the computation. If input points from a kernel with exact predicates and non-exact constructions are used, and a certified result is expected, the traits Convex_hull_traits_3<R> should be used (R being the input kernel). Note that the default traits class takes this into account.

16.2.2   Convexity Checking

The function is_strongly_convex_3 implements the algorithm of Mehlhorn et al. [MNS+96] to determine if the vertices of a given polytope constitute a strongly convex point set or not. This function is used in postcondition testing for convex_hull_3 .

16.2.3   Example

The following program computes the convex hull of a set of 250 random points chosen from a sphere of radius 100. We assume that the points are not all identical and not all collinear, thus we directly use a polyhedron as output. Note the usage of the functor Plane_from_facet together with std::transform to compute the equations of the plane of each facet of the convex hull.

File: examples/Convex_hull_3/quickhull_3.cpp
#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/point_generators_3.h>
#include <CGAL/algorithm.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/convex_hull_3.h>
#include <vector>


typedef CGAL::Exact_predicates_inexact_constructions_kernel  K;
typedef CGAL::Polyhedron_3<K>                     Polyhedron_3;
typedef K::Segment_3                              Segment_3;

// define point creator
typedef K::Point_3                                Point_3;
typedef CGAL::Creator_uniform_3<double, Point_3>  PointCreator;

//a functor computing the plane containing a triangular facet
struct Plane_from_facet {
  Polyhedron_3::Plane_3 operator()(Polyhedron_3::Facet& f) {
      Polyhedron_3::Halfedge_handle h = f.halfedge();
      return Polyhedron_3::Plane_3( h->vertex()->point(),
                                    h->next()->vertex()->point(),
                                    h->opposite()->vertex()->point());
  }
};


int main()
{
  CGAL::Random_points_in_sphere_3<Point_3, PointCreator> gen(100.0);

  // generate 250 points randomly on a sphere of radius 100.0
  // and copy them to a vector
  std::vector<Point_3> points;
  CGAL::cpp0x::copy_n( gen, 250, std::back_inserter(points) );

  // define polyhedron to hold convex hull
  Polyhedron_3 poly;
  
  // compute convex hull of non-collinear points
  CGAL::convex_hull_3(points.begin(), points.end(), poly);

  std::cout << "The convex hull contains " << poly.size_of_vertices() << " vertices" << std::endl;
  
  // assign a plane equation to each polyhedron facet using functor Plane_from_facet
  std::transform( poly.facets_begin(), poly.facets_end(), poly.planes_begin(),Plane_from_facet());


  return 0;
}

16.3   Incremental Convex Hull Construction

The function convex_hull_incremental_3 provides an interface similar to convex_hull_3 for the d-dimensional incremental construction algorithm [CMS93] implemented by the class CGAL::Convex_hull_d<R> that is specialized to three dimensions. This function accepts an iterator range over a set of input points and returns a polyhedron, but it does not have a traits class in its interface. It uses the kernel class Kernel used in the polyhedron type to define an instance of the adapter traits class CGAL::Convex_hull_d_traits_3<Kernel>.

In almost all cases, the static and the dynamic version will be faster than the incremental convex hull algorithm (mainly because of the lack of efficient filtering and the overhead of the general d-dimension). The incremental version is provided for completeness and educational purposes. You should use the dynamic version when you need an efficient incremental convex hull algorithm.

To use the full functionality available with the d-dimensional class CGAL::Convex_hull_d<R> in three dimensions (e.g., the ability to insert new points and to query if a point lies in the convex hull or not), you can instantiate the class CGAL::Convex_hull_d<K> with the adapter traits class CGAL::Convex_hull_d_traits_3<K>, as shown in the following example.

16.3.1   Example

File: examples/Convex_hull_3/incremental_hull_class_3.cpp

#include <CGAL/Cartesian.h>
#include <CGAL/point_generators_3.h>
#include <CGAL/Convex_hull_d.h>
#include <CGAL/Convex_hull_d_traits_3.h>
#include <CGAL/Convex_hull_d_to_polyhedron_3.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/algorithm.h>
#include <vector>
#include <cassert>

#ifdef CGAL_USE_GMP
#include <CGAL/Gmpq.h>
typedef CGAL::Gmpq RT;
#else
#include <CGAL/MP_Float.h>
typedef CGAL::Quotient<CGAL::MP_Float> RT;
#endif

typedef CGAL::Cartesian<RT>                        K;
typedef K::Point_3                                 Point_3;
typedef CGAL::Polyhedron_3< K>                     Polyhedron_3;

typedef CGAL::Convex_hull_d_traits_3<K>            Hull_traits_3;
typedef CGAL::Convex_hull_d< Hull_traits_3 >       Convex_hull_3;
typedef CGAL::Creator_uniform_3<double, Point_3>   Creator;

int main ()
{
  Convex_hull_3 CH(3);  // create instance of the class with dimension == 3

  // generate 250 points randomly on a sphere of radius 100
  // and insert them into the convex hull
  CGAL::Random_points_in_sphere_3<Point_3, Creator> gen(100);

  for (int i = 0; i < 250 ; i++, ++gen)
     CH.insert(*gen);

  assert(CH.is_valid());

  // define polyhedron to hold convex hull and create it
  Polyhedron_3 P;
  CGAL::convex_hull_d_to_polyhedron_3(CH,P);

  std::cout << "The convex hull has " << P.size_of_vertices() 
            << " vertices" << std::endl;
  return 0;
}

16.4   Dynamic Convex Hull Construction

Fully dynamic maintenance of a convex hull can be achieved by using the class CGAL::Delaunay_triangulation_3. This class supports insertion and removal of points (i.e., vertices of the triangulation) and the convex hull edges are simply the finite edges of infinite faces. The following example illustrates the dynamic construction of a convex hull. First, random points from a sphere of a certain radius are generated and are inserted into a triangulation. Then the number of points of the convex hull are obtained by counting the number of triangulation vertices incident to the infinite vertex. Some of the points are removed and then the number of points remaining on the hull are determined. Notice that the vertices incident to the infinite vertex of the triangulation are on the convex hull but it may be that not all of them are vertices of the hull.

16.4.1   Example

File: examples/Convex_hull_3/dynamic_hull_3.cpp
#include <CGAL/Exact_predicates_inexact_constructions_kernel.h>
#include <CGAL/point_generators_3.h>
#include <CGAL/Delaunay_triangulation_3.h>
#include <CGAL/Polyhedron_3.h>
#include <CGAL/convex_hull_3_to_polyhedron_3.h>
#include <CGAL/algorithm.h>

#include <list>

typedef CGAL::Exact_predicates_inexact_constructions_kernel      K;
typedef K::Point_3                                              Point_3;
typedef CGAL::Delaunay_triangulation_3<K>                       Delaunay;
typedef Delaunay::Vertex_handle                                 Vertex_handle;
typedef CGAL::Polyhedron_3<K>                                   Polyhedron_3;

int main()
{
  CGAL::Random_points_in_sphere_3<Point_3> gen(100.0);
  std::list<Point_3>   points;

  // generate 250 points randomly on a sphere of radius 100.0
  // and insert them into the triangulation
  CGAL::cpp0x::copy_n(gen, 250, std::back_inserter(points) );
  Delaunay T;
  T.insert(points.begin(), points.end());

  std::list<Vertex_handle>  vertices;
  T.incident_vertices(T.infinite_vertex(), std::back_inserter(vertices));
  std::cout << "This convex hull of the 250 points has "
            << vertices.size() << " points on it." << std::endl;

  // remove 25 of the input points
  std::list<Vertex_handle>::iterator v_set_it = vertices.begin();
  for (int i = 0; i < 25; i++)
  {
     T.remove(*v_set_it);
     v_set_it++;
  }

  //copy the convex hull of points into a polyhedron and use it
  //to get the number of points on the convex hull
  Polyhedron_3 chull;
  CGAL::convex_hull_3_to_polyhedron_3(T,chull);
  
  std::cout << "After removal of 25 points, there are "
            << chull.size_of_vertices() << " points on the convex hull." << std::endl;
  

  
  return 0;
}

16.5   Performance

In the following, we compare the running times of the three approaches to compute 3D convex hulls. For the static version (using CGAL::convex_hull_3) and the dynamic version (using CGAL::Delaunay_triangulation_3 and CGAL::convex_hull_3_to_polyhedron_3), the kernel used was CGAL::Exact_predicates_inexact_constructions_kernel. For the incremental version (using CGAL::convex_hull_incremental_3), the kernel used was CGAL::Exact_predicates_exact_constructions_kernel.

To compute the convex hull of a million of random points in a unit ball the static approach needed 1.63s, while the dynamic and incremental approaches needed 9.50s and 11.54s respectively. To compute the convex hull of the model of Figure 16.1 featuring 192135 points, the static approach needed 0.18s, while the dynamic and incremental approaches needed 1.90s and 6.80s respectively.

The measurements have been performed using Cgal 3.9, using the Gnu C++ compiler version 4.3.5, under Linux (Debian distribution), with the compilation options -O3 -DCGAL_NDEBUG. The computer used was equipped with a 64bit Intel Xeon 2.27GHz processor and 12GB of RAM.