CGAL 5.1 - Polygon Mesh Processing

Functions to fill holes given as a range of halfedges or as range of points.

Functions

template<typename PolygonMesh , typename OutputIterator , typename NamedParameters >
OutputIterator CGAL::Polygon_mesh_processing::triangulate_hole (PolygonMesh &pmesh, typename boost::graph_traits< PolygonMesh >::halfedge_descriptor border_halfedge, OutputIterator out, const NamedParameters &np)
triangulates a hole in a polygon mesh. More...

template<typename PolygonMesh , typename FaceOutputIterator , typename VertexOutputIterator , typename NamedParameters >
std::pair< FaceOutputIterator, VertexOutputIterator > CGAL::Polygon_mesh_processing::triangulate_and_refine_hole (PolygonMesh &pmesh, typename boost::graph_traits< PolygonMesh >::halfedge_descriptor border_halfedge, FaceOutputIterator face_out, VertexOutputIterator vertex_out, const NamedParameters &np)
triangulates and refines a hole in a polygon mesh. More...

template<typename PolygonMesh , typename FaceOutputIterator , typename VertexOutputIterator , typename NamedParameters >
std::tuple< bool, FaceOutputIterator, VertexOutputIterator > CGAL::Polygon_mesh_processing::triangulate_refine_and_fair_hole (PolygonMesh &pmesh, typename boost::graph_traits< PolygonMesh >::halfedge_descriptor border_halfedge, FaceOutputIterator face_out, VertexOutputIterator vertex_out, const NamedParameters &np)
triangulates, refines and fairs a hole in a polygon mesh. More...

template<typename PointRange1 , typename PointRange2 , typename OutputIterator , typename NamedParameters >
OutputIterator CGAL::Polygon_mesh_processing::triangulate_hole_polyline (const PointRange1 &points, const PointRange2 &third_points, OutputIterator out, const NamedParameters &np)
creates triangles to fill the hole defined by points in the range points. More...

template<typename PointRange , typename OutputIterator , typename NamedParameters >
OutputIterator CGAL::Polygon_mesh_processing::triangulate_hole_polyline (const PointRange &points, OutputIterator out, const NamedParameters &np)
Same as above but the range of third points is omitted. More...

◆ triangulate_and_refine_hole()

template<typename PolygonMesh , typename FaceOutputIterator , typename VertexOutputIterator , typename NamedParameters >
 std::pair CGAL::Polygon_mesh_processing::triangulate_and_refine_hole ( PolygonMesh & pmesh, typename boost::graph_traits< PolygonMesh >::halfedge_descriptor border_halfedge, FaceOutputIterator face_out, VertexOutputIterator vertex_out, const NamedParameters & np )

#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>

triangulates and refines a hole in a polygon mesh.

Template Parameters
 PolygonMesh must be model of MutableFaceGraph FacetOutputIterator model of OutputIterator holding boost::graph_traits::face_descriptor for patch faces. VertexOutputIterator model of OutputIterator holding boost::graph_traits::vertex_descriptor for patch vertices. NamedParameters a sequence of Named Parameters
Parameters
 pmesh polygon mesh which has the hole border_halfedge a border halfedge incident to the hole face_out output iterator over patch faces vertex_out output iterator over patch vertices without including the boundary np an optional sequence of Named Parameters among the ones listed below
Optional Named Parameters
 a property map associating points to the vertices of pmesh Type: a class model of ReadWritePropertyMap with boost::graph_traits::vertex_descriptor as key type and Point_3 as value type Default: boost::get(CGAL::vertex_point, pmesh) Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in PolygonMesh. an instance of a geometric traits class Type: a class model of Kernel Default: a CGAL Kernel deduced from the point type, using CGAL::Kernel_traits Extra: The geometric traits class must be compatible with the vertex point type. If true, use the Delaunay triangulation facet search space. Type: Boolean Default: true Extra: If no valid triangulation can be found in this search space, the algorithm falls back to the non-Delaunay triangulations search space to find a solution. factor to control density of the ouput mesh, where larger values cause denser refinements, as in refine() Type: double Default: $$\sqrt{2}$$
Returns
pair of face_out and vertex_out
CGAL::Polygon_mesh_processing::triangulate_hole()
CGAL::Polygon_mesh_processing::refine()

◆ triangulate_hole()

template<typename PolygonMesh , typename OutputIterator , typename NamedParameters >
 OutputIterator CGAL::Polygon_mesh_processing::triangulate_hole ( PolygonMesh & pmesh, typename boost::graph_traits< PolygonMesh >::halfedge_descriptor border_halfedge, OutputIterator out, const NamedParameters & np )

#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>

triangulates a hole in a polygon mesh.

The hole must not contain any non-manifold vertex, nor self-intersections. The patch generated does not introduce non-manifold edges nor degenerate triangles. If a hole cannot be triangulated, pmesh is not modified and nothing is recorded in out.

Template Parameters
 PolygonMesh a model of MutableFaceGraph OutputIterator a model of OutputIterator holding boost::graph_traits::face_descriptor for patch faces. NamedParameters a sequence of Named Parameters
Parameters
 pmesh polygon mesh containing the hole border_halfedge a border halfedge incident to the hole out iterator over patch faces np an optional sequence of Named Parameters among the ones listed below
Optional Named Parameters
 a property map associating points to the vertices of pmesh Type: a class model of ReadWritePropertyMap with boost::graph_traits::vertex_descriptor as key type and Point_3 as value type Default: boost::get(CGAL::vertex_point, pmesh) Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in PolygonMesh. an instance of a geometric traits class Type: a class model of Kernel Default: a CGAL Kernel deduced from the point type, using CGAL::Kernel_traits Extra: The geometric traits class must be compatible with the vertex point type. If true, use the Delaunay triangulation facet search space. Type: Boolean Default: true Extra: If no valid triangulation can be found in this search space, the algorithm falls back to the non-Delaunay triangulations search space to find a solution.
Returns
out

◆ triangulate_hole_polyline() [1/2]

template<typename PointRange1 , typename PointRange2 , typename OutputIterator , typename NamedParameters >
 OutputIterator CGAL::Polygon_mesh_processing::triangulate_hole_polyline ( const PointRange1 & points, const PointRange2 & third_points, OutputIterator out, const NamedParameters & np )

#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>

creates triangles to fill the hole defined by points in the range points.

Triangles are recorded into out using the indices of the input points in the range points. Note that no degenerate triangles will be produced. If no triangulation can be found, then nothing is recorded in out.

If faces incident to the polyline outside the hole are known, it is recommended to use this function. The point range third_points indicates for each pair of consecutive points in the range points, the third point of the face this segment is incident to. It influences the choice of the best triangulation while avoiding overfolding.

Note that the ranges points and third_points may or may not contain duplicated first point at the end of sequence.

Precondition
third_points.size() == points.size()
Template Parameters
 PointRange range of points, model of Range. Its iterator type is InputIterator. OutputIterator model of OutputIterator, to collect patch faces. A specialization for CGAL::value_type_traits must be available, and the corresponding value type type must have a constructor type(int p0, int p1, int p2) available. The indices correspond to the ones of input points in points. NamedParameters a sequence of Named Parameters
Parameters
 points the range of input points third_points the range of third points out iterator over output patch triangles, described by indices of points in points np an optional sequence of Named Parameters among the ones listed below
Optional Named Parameters
 an instance of a geometric traits class Type: a class model of Kernel Default: a CGAL Kernel deduced from the point type, using CGAL::Kernel_traits Extra: The geometric traits class must be compatible with the vertex point type. If true, use the Delaunay triangulation facet search space. Type: Boolean Default: true Extra: If no valid triangulation can be found in this search space, the algorithm falls back to the non-Delaunay triangulations search space to find a solution.
Examples:
Polygon_mesh_processing/triangulate_polyline_example.cpp.

◆ triangulate_hole_polyline() [2/2]

template<typename PointRange , typename OutputIterator , typename NamedParameters >
 OutputIterator CGAL::Polygon_mesh_processing::triangulate_hole_polyline ( const PointRange & points, OutputIterator out, const NamedParameters & np )

#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>

Same as above but the range of third points is omitted.

They are not taken into account in the cost computation that leads the hole filling.

◆ triangulate_refine_and_fair_hole()

template<typename PolygonMesh , typename FaceOutputIterator , typename VertexOutputIterator , typename NamedParameters >
 std::tuple CGAL::Polygon_mesh_processing::triangulate_refine_and_fair_hole ( PolygonMesh & pmesh, typename boost::graph_traits< PolygonMesh >::halfedge_descriptor border_halfedge, FaceOutputIterator face_out, VertexOutputIterator vertex_out, const NamedParameters & np )

#include <CGAL/Polygon_mesh_processing/triangulate_hole.h>

triangulates, refines and fairs a hole in a polygon mesh.

Template Parameters
 PolygonMesh a model of MutableFaceGraph FaceOutputIterator model of OutputIterator holding boost::graph_traits::face_descriptor for patch faces VertexOutputIterator model of OutputIterator holding boost::graph_traits::vertex_descriptor for patch vertices NamedParameters a sequence of Named Parameters
Parameters
 pmesh polygon mesh which has the hole border_halfedge a border halfedge incident to the hole face_out output iterator over patch faces vertex_out output iterator over patch vertices without including the boundary np an optional sequence of Named Parameters among the ones listed below
Optional Named Parameters
 a property map associating points to the vertices of pmesh Type: a class model of ReadWritePropertyMap with boost::graph_traits::vertex_descriptor as key type and Point_3 as value type Default: boost::get(CGAL::vertex_point, pmesh) Extra: If this parameter is omitted, an internal property map for CGAL::vertex_point_t must be available in PolygonMesh. an instance of a geometric traits class Type: a class model of Kernel Default: a CGAL Kernel deduced from the point type, using CGAL::Kernel_traits Extra: The geometric traits class must be compatible with the vertex point type. If true, use the Delaunay triangulation facet search space. Type: Boolean Default: true Extra: If no valid triangulation can be found in this search space, the algorithm falls back to the non-Delaunay triangulations search space to find a solution. factor to control density of the ouput mesh, where larger values cause denser refinements, as in refine() Type: double Default: $$\sqrt{2}$$ A value controling the tangential continuity of the output surface patch. The possible values are 0, 1 and 2, refering to the C0, C1 and C2 continuity. Type: unsigned int Default: 1 Extra: The larger fairing_continuity gets, the more fixed vertices are required. an instance of the sparse linear solver used for fairing Type: a class model of SparseLinearAlgebraWithFactorTraits_d Default: If Eigen 3.2 (or greater) is available and CGAL_EIGEN3_ENABLED is defined, then the following overload of Eigen_solver_traits is provided as default value: CGAL::Eigen_solver_traits::EigenType, Eigen::COLAMDOrdering > >
Returns
tuple of
• bool: true if fairing is successful
• face_out
• vertex_out