CGAL 5.5.1  3D Alpha Shapes

Assume we are given a set \( S\) of points in 2D or 3D and we would like to have something like "the shape formed by these points". This is quite a vague notion and there are probably many possible interpretations, the alpha shape being one of them. Alpha shapes can be used for shape reconstruction from a dense unorganized set of data points. Indeed, an alpha shape is demarcated by a frontier, which is a linear approximation of the original shape [1].
As mentioned in Edelsbrunner's and Mücke's paper [2], one can intuitively think of an alpha shape as the following. Imagine a huge mass of icecream making up the space \( \mathbb{R}^3\) and containing the points as "hard" chocolate pieces. Using one of those sphereformed icecream spoons, we carve out all parts of the icecream block we can reach without bumping into chocolate pieces, thereby even carving out holes in the inside (e.g. parts not reachable by simply moving the spoon from the outside). We will eventually end up with a (not necessarily convex) object bounded by caps, arcs and points. If we now straighten all "round" faces to triangles and line segments, we have an intuitive description of what is called the alpha shape of \( S\). The drawing above provides an example of this process in 2D (where our icecream spoon is simply a circle).
Alpha shapes depend on a parameter \( \alpha\) after which they are named. In the icecream analogy above, \( \alpha\) is the squared radius of the carving spoon. A very small value will allow us to eat up all of the icecream except the chocolate points themselves. Thus we already see that the alpha shape degenerates to the pointset \( S\) for \( \alpha \rightarrow 0\). On the other hand, a huge value of \( \alpha\) will prevent us even from moving the spoon between two points since it is too large and we will never spoon up the icecream lying in the inside of the convex hull of \( S\). Hence, the alpha shape becomes the convex hull of \( S\) as \( \alpha \rightarrow \infty\).
CGAL offers 2D and 3D alpha shapes. The GUDHI library offers a dD Alpha complex.
We distinguish two versions of alpha shapes. Basic alpha shapes are based on the Delaunay triangulation. Weighted alpha shapes are based on its generalization, the regular triangulation (cf. Section Regular Triangulations), replacing the euclidean distance by the power to weighted points.
Let us consider the basic case with a Delaunay triangulation. We first define the alpha complex of the set of points \( S\). The alpha complex is a subcomplex of the Delaunay triangulation. For a given value of \( \alpha\), the alpha complex includes all the simplices in the Delaunay triangulation which have an empty circumscribing sphere with squared radius equal or smaller than \( \alpha\). Here "empty" means that the open sphere does not include any points of \( S\). The alpha shape is then simply the domain covered by the simplices of the alpha complex (see [2]).
In general, an alpha complex is a disconnected and nonpure complex, meaning in particular that the alpha complex may have singular faces. For \( 0 \leq k \leq d1\), a \( k\)simplex of the alpha complex is said to be singular if it is not a facet of a \( (k+1)\)simplex of the complex. CGAL provides two versions of alpha shapes. In the general mode, the alpha shapes correspond strictly to the above definition. The regularized mode provides a regularized version of the alpha shapes. It corresponds to the domain covered by a regularized version of the alpha complex where singular faces are removed (See Figure 50.1 for an example).
The alpha shapes of a set of points \( S\) form a discrete family, even though they are defined for all real numbers \( \alpha\). The entire family of alpha shapes can be represented through the underlying triangulation of \( S\). In this representation each \( k\)simplex of the underlying triangulation is associated with an interval that specifies for which values of \( \alpha\) the \( k\)simplex belongs to the alpha complex. Relying on this fact, the family of alpha shapes can be computed efficiently and relatively easily. Furthermore, we can select the optimal value of \( \alpha\) to get an alpha shape including all data points and having less than a given number of connected components. Also, the alphavalues allows to define a filtration on the faces of the triangulation of a set of points. In this filtration, the faces of the triangulation are output in increasing order of the alpha value for which they appear in the alpha complex. In case of equal alpha values, lower dimensional faces are output first.
The definition is analog in the case of weighted alpha shapes. The input set is now a set of weighted points (which can be regarded as spheres) and the underlying triangulation is the regular triangulation of this set. Two spheres, or two weighted points, with centers \( C_1, C_2\) and radii \( r_1, r_2 \) are said to be orthogonal iff \( C_1C_2 ^2 = r_1^2 + r_2^2\) and suborthogonal iff \( C_1C_2 ^2 < r_1^2 + r_2^2\). For a given value of \( \alpha\), the weighted alpha complex is formed with the simplices of the regular triangulation triangulation such that there is a sphere orthogonal to the weighted points associated with the vertices of the simplex and suborthogonal to all the other input weighted points. Once again the alpha shape is then defined as the domain covered by a the alpha complex and comes in general and regularized versions.
The class Alpha_shape_3<Dt,ExactAlphaComparisonTag>
represents the whole family of alpha shapes for a given set of points. The class includes the underlying triangulation Dt
of the set, and associates to each \( k\)face of this triangulation an interval specifying for which values of \( \alpha\) the face belongs to the alpha complex. The second template parameter, ExactAlphaComparisonTag
, is a tag that, when set to CGAL::Tag_true, triggers exact comparisons between alpha values.
The class provides functions to set and get the current \( \alpha\)value, as well as an iterator that enumerates the \( \alpha\) values where the alpha shape changes.
Additionally, the class has a filtration member function that, given an output iterator with Object
as value type, outputs the faces of the triangulation according to the order of apparition in the alpha complex when alpha increases.
Finally, it provides a function to determine the smallest value \( \alpha\) such that the alpha shape satisfies the following two properties:
The current implementation is static, that is after its construction points cannot be inserted or removed.
Given a value of alpha, the class Fixed_alpha_shape_3<Dt>
represents one alpha shape for a given set of points. The class includes the underlying triangulation Dt
of the set, and associates to each \( k\)face of this triangulation a classification type. This class is dynamic, that is after its construction points can be inserted or removed.
Both classes provide member functions to classify for a (given) value of \( \alpha\) the different faces of the triangulation as EXTERIOR
, SINGULAR
, REGULAR
or INTERIOR
with respect to the alpha shape. A \( k\)face on the boundary of the alpha complex is said to be: REGULAR
if it is a subface of the alphacomplex which is a subface of a \( (k+1)\)face of the alpha complex, and SINGULAR
otherwise. A \( k\)face of the alpha complex which is not on the boundary of the alpha complex is said to be INTERIOR
. See Figure 50.2 for a 2D illustration.
The classes provide also output iterators to get for a given alpha
value the vertices, edges, facets and cells of the different types (EXTERIOR
, SINGULAR
, REGULAR
or INTERIOR
).
It is possible to export a 3D alpha shape to a std::ostream
using the operator<<
, see the documentation of the class Alpha_shape_3
for more information.
We currently do not specify concepts for the underlying triangulation type. Models that work for a family of alphashapes are the instantiations of the classes Delaunay_triangulation_3
and Periodic_3_Delaunay_triangulation_3
(see example Example for Periodic Alpha Shapes). A model that works for a fixed alphashape are the instantiations of the class Delaunay_triangulation_3
. Models that work for a weighted alphashape are the instantiations of the classes Regular_triangulation_3
and Periodic_3_regular_triangulation_3
. The triangulation needs a geometric traits class and a triangulation data structure as template parameters.
For the class Alpha_shape_3<Dt,ExactAlphaComparisonTag>
, the requirements of the traits class are described in the concepts AlphaShapeTraits_3
in the nonweighted case and WeightedAlphaShapeTraits_3
in the weighted case. All CGAL kernels are models of both concepts.
The triangulation data structure of the triangulation has to be a model of the concept TriangulationDataStructure_3
whose vertex and cell classes are model of the concepts AlphaShapeVertex_3
and AlphaShapeCell_3
. The classes Alpha_shape_vertex_base_3<Gt>
and Alpha_shape_cell_base_3<Gt>
are models of these concepts and can be used for all type of alpha shapes, provided that the template parameters Vb
and Fb
are appropriately chosen, as we shall see in the following section.
For the class Fixed_alpha_shape_3<Dt>
, the requirements of the traits class are described in the concepts FixedAlphaShapeTraits_3
in the nonweighted case and FixedWeightedAlphaShapeTraits_3
in the weighted case. All CGAL kernels are models of both concepts. The triangulation data structure of the triangulation has to be a model of the concept TriangulationDataStructure_3
whose vertex and cell classes are model of the concepts FixedAlphaShapeVertex_3
and FixedAlphaShapeCell_3
. The package provides models Fixed_alpha_shape_vertex_base_3<Gt>
and Fixed_alpha_shape_cell_base_3<Gt>
, respectively.
Additional requirements are put when using weighted or periodic triangulations as underlying triangulation:
Regular_triangulation_3
or Periodic_3_regular_triangulation_3
), the vertex and cell classes must respectively be models to both AlphaShapeVertex_3
and RegularTriangulationVertexBase_3
, and to both AlphaShapeCell_3
and RegularTriangulationCellBase_3
(see example: Example for Weighted AlphaShapes). Periodic_3_Delaunay_triangulation_3
or Periodic_3_regular_triangulation_3
), the vertex and cell classes must respectively be models to both AlphaShapeVertex_3
and Periodic_3TriangulationDSVertexBase_3
, and to both AlphaShapeCell_3
and Periodic_3TriangulationDSCellBase_3
(see example: Example for Periodic Alpha Shapes). The class Alpha_shape_3<Dt,ExactAlphaComparisonTag>
represents the whole family of alpha shapes for a given set of points while the class Fixed_alpha_shape_3<Dt>
represents only one alpha shape (for a fixed alpha). When using the same kernel, Fixed_alpha_shape_3<Dt>
is a lighter version. It is thus naturally much more efficient when the alphashape is needed for a single given value of alpha. In addition, note that the class Alpha_shape_3<Dt,ExactAlphaComparisonTag>
requires constructions (squared radius of simplices) while the class Fixed_alpha_shape_3<Dt>
uses only predicates. This implies that a certified construction of one (several) alphashape, using the Alpha_shape_3<Dt,ExactAlphaComparisonTag>
requires a kernel with exact predicates and exact constructions (or setting ExactAlphaComparisonTag
to Tag_true
) while using a kernel with exact predicates is sufficient for the class Fixed_alpha_shape_3<Dt>
. This makes the class Fixed_alpha_shape_3<Dt>
even more efficient in this setting. In addition, note that the Fixed
version is the only of the two that supports incremental insertion and removal of points.
We give the time spent while computing the alpha shape of a protein (considered as a set of weighted points) featuring 4251 atoms (using gcc 4.3
under Linux with O3
and DNDEBUG
flags, on a 2.27GHz Intel(R) Xeon(R) E5520 CPU): Using Exact_predicates_inexact_constructions_kernel
, building the regular triangulation requires 0.09s, then the class Fixed_alpha_shape_3<Dt>
required 0.05s while the class Alpha_shape_3<Dt,ExactAlphaComparisonTag>
requires 0.35s if ExactAlphaComparisonTag
is Tag_false
(and 0.70s with Tag_true
). Using Exact_predicates_exact_constructions_kernel
, building the regular triangulation requires 0.19s and then the class Alpha_shape_3<Dt,ExactAlphaComparisonTag>
requires 0.90s.
This example builds a basic alpha shape using a Delaunay triangulation as underlying triangulation.
File Alpha_shapes_3/ex_alpha_shapes_3.cpp
When many points are input in the alpha shape, say more than 10 000, it may pay off to use a Delaunay triangulation with the Fast_location
policy as underlying triangulation in order to speed up point location queries (cf. Section The Location Policy Parameter).
File Alpha_shapes_3/ex_alpha_shapes_with_fast_location_3.cpp
The following examples build a weighted alpha shape requiring a regular triangulation as underlying triangulation. The alpha shape is built in GENERAL
mode.
File Alpha_shapes_3/ex_weighted_alpha_shapes_3.cpp
Same example as previous but using a fixed value of alpha.
File Alpha_shapes_3/ex_fixed_weighted_alpha_shapes_3.cpp
On some platforms, the alpha shapes of the set of points of this example cannot be computed when using a traits with inexact constructions. To be able to compute them with a traits with inexact constructions, the tag ExactAlphaComparisonTag
is set to Tag_true
.
File Alpha_shapes_3/ex_alpha_shapes_exact_alpha.cpp
The following example shows how to use a periodic Delaunay triangulation (Chapter 3D Periodic Triangulations) as underlying triangulation for the alpha shape computation. Usage of a weighted Delaunay periodic triangulation is presented in the example: ex_weighted_periodic_alpha_shapes_3.cpp.
In order to define the original domain and to benefit from the builtin heuristic optimizations of the periodic triangulation computation, it is recommended to first construct the triangulation and then construct the alpha shape from it. The alpha shape constructor that takes a point range can be used as well but in this case the original domain cannot be specified and the default unit cube will be chosen and no optimizations will be used.
It is also recommended to switch the triangulation to 1sheeted covering if possible. Note that a periodic triangulation in 27sheeted covering space is degenerate. In this case, an exact constructions kernel needs to be used to compute the alpha shapes. Otherwise the results will suffer from roundoff problems.
File Alpha_shapes_3/ex_periodic_alpha_shapes_3.cpp