Efi Fogel, Ophir Setter, Ron Wein, Guy Zucker, Baruch Zukerman, and Dan Halperin
This package consists of the implementation of Boolean set-operations on point sets bounded by weakly x-monotone curves^{1} in 2-dimensional Euclidean space. In particular, it contains the implementation of regularized Boolean set-operations, intersection predicates, and point containment predicates. Figure 17.1 shows simple examples of such operations.
Ordinary Boolean set-operations, which distinguish between the interior and the boundary of a polygon, are not implemented within this package. The Nef_2 package supports these operations for (linear) polygons; see Chapter 18.
In the rest of this chapter we use, unless otherwise stated, the traditional notation to denote regularized operations; e.g., P ∩ Q means the regularized intersection of P and Q.
Our package supports the following Boolean set-operations on two point sets P and Q that each is the union of one or more general polygons:
In the rest of this chapter we review the Boolean set-operations package in more depth. In Section 17.3 we focus on Boolean set-operations on linear polygons, introducing the notion of polygons with holes and of a general polygon set. Section 17.4 introduces general polygons. We first discuss polygons whose edges are either line segements or circular arcs and then explain how to construct and use general polygons whose edges can be arbitrary weakly x-monotone curves.
In our context, a polygon must uphold the following conditions:
The basic library of Cgal includes the Polygon_2<Kernel,Container> class-template that represents a linear polygon in the plane. The polygon is represented by its vertices stored in a container of objects of type Kernel::Point_2. The polygon edges are line segments (Kenrel::Segment_2 objects) between adjacent points in the container. By default, the Container is a vector of Kernel::Point_2 objects.
The following function demonstrates how to use the basic access functions of the Polygon_2 class. It accepts a polygon P and prints it in a readable format:
template<class Kernel, class Container> void print_polygon (const CGAL::Polygon_2<Kernel, Container>& P) { typename CGAL::Polygon_2<Kernel, Container>::Vertex_const_iterator vit; std::cout << "[ " << P.size() << " vertices:"; for (vit = P.vertices_begin(); vit != P.vertices_end(); ++vit) std::cout << " (" << *vit << ')'; std::cout << " ]" << std::endl; }
In this section we use the term polygon to indicate a Polygon_2 instance, namely, a polygon having linear edges. General polygons are only discussed in Section 17.4.
The basic components of our package are the free (global) functions complement() that accepts a single Polygon_2 object, and intersection(), join(),^{2} difference(), symmetric_difference() and the predicate do_intersect() that accept two Polygon_2 objects as their input. We explain how these functions should be used throught several examples in the following sections.
File: examples/Boolean_set_operations_2/do_intersect.cpp
/*! \file do_intersect.cpp * Determining whether two triangles intersect. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/Boolean_set_operations_2.h> // instead of //typedef CGAL::Cartesian<Number_type> Kernel; // workaround for VC++ struct Kernel : public CGAL::Cartesian<Number_type> {}; typedef Kernel::Point_2 Point_2; typedef CGAL::Polygon_2<Kernel> Polygon_2; #include "print_utils.h" int main () { Polygon_2 P; P.push_back (Point_2 (-1,1)); P.push_back (Point_2 (0,-1)); P.push_back (Point_2 (1,1)); std::cout << "P = "; print_polygon (P); Polygon_2 Q; Q.push_back(Point_2 (-1,-1)); Q.push_back(Point_2 (1,-1)); Q.push_back(Point_2 (0,1)); std::cout << "Q = "; print_polygon (Q); if ((CGAL::do_intersect (P, Q))) std::cout << "The two polygons intersect in their interior." << std::endl; else std::cout << "The two polygons do not intersect." << std::endl; return 0; }
In many cases a binary operation that operates on two simple polygons that have no holes may result in a set of polygons that contain holes in their interior (see Figure 17.3.1 (a)), or a set of disjoint polygons (see Figure 17.3.1 (b); a similar set may result from the union, or the symmetric difference, of two disjoint polygons). Moreover, the complement of a simple polygon is an unbounded set that contains a hole; see Figure 17.3.1 (c).
Regular sets are closed under regularized Boolean set-operations. These operations accept as input, and may result as output, polygons with holes. A polygon with holes represents a point set that may be bounded or unbounded. In case of a bounded set, its outer boundary is represented as a relatively simple (but not necessarily simple) polygon, whose vertices are oriented in a counterclockwise order around the interior of the set. In addition, the set may contain holes, where each hole is represented as a simple polygon, whose vertices are oriented in a clockwise order around the interior of the hole. Note that an unbounded polygon without holes spans the entire plane. Vertices of holes may coincide with vertices of the boundary; see below for an example.
A point set represented by a polygon with holes is considered to be closed. Therefore, the boundaries of the holes are parts of the set (and not part of the holes). The exact definition of the obtained polygon with holes as a result of a Boolean set-operation or a sequence of such operations is closely related to the definition of regularized Boolean set-operations, being the closure of the interior of the corresponding ordinary operation as explained next.
Consider, for example, the regular set depicted on the right, which is the result of the union of three small triangles translated appropriately. Alternatively, the same set can be reached by taking the difference between a large triangle and a small upside-down triangle. In general, there are many ways to arrive at a particular point set. However, the set of polygons with holes obtained through the application of any sequence of operations is unique. The set depicted on the right is represented as a single polygon having a triangular outer boundary with a single triangluar hole in its interior - and not as three triangles that have no holes at all. As a general rule, if two point sets are connected, then they belong to the same polygon with holes.
The class template Polygon_with_holes_2<Kernel,Container> represents polygons with holes as described above, where the outer boundary and the hole boundaries are realized as Polygon_2<Kernel,Container> objects. Given an instance P of the Polygon_with_holes_2 class, you can use the predicate is_unbounded() to check whether P is a unbounded set. If it is bounded, you can obtain the counterclockwise-oriented polygon that represents its outer boundary through the member function outer_boundary(). You can also traverse the holes of P through holes_begin() and holes_end(). The two functions return iterators of the nested type Polygon_with_holes_2::Hole_const_iterator that defines the valid range of P's holes. The value type of this iterator is Polygon_2.
The following function demonstrates how to traverse a polygon with holes. It accepts a Polygon_with_holes_2 object and uses the auxiliary function print_polygon() to prints all its components in a readable format:
template<class Kernel, class Container> void print_polygon_with_holes(const CGAL::Polygon_with_holes_2<Kernel, Container> & pwh) { if (! pwh.is_unbounded()) { std::cout << "{ Outer boundary = "; print_polygon (pwh.outer_boundary()); } else std::cout << "{ Unbounded polygon." << std::endl; typename CGAL::Polygon_with_holes_2<Kernel,Container>::Holes_const_iterator hit; unsigned int k = 1; std::cout << " " << pwh.number_of_holes() << " holes:" << std::endl; for (hit = pwh.holes_begin(); hit != pwh.holes_end(); ++hit, ++k) { std::cout << " Hole #" << k << " = "; print_polygon (*hit); } std::cout << " }" << std::endl; }
The simple versions of the free functions mentioned therefore accept two Polygon_2 object P and Q as their input, while their output is given using polygon with holes instances:
The following example demonstartes the usage of the free functions join() and intersect() for computing the union and the intersection of the two simple polygons depicted in Figure 17.3.1 (b). The example uses the auxiliary function print_polygon_with_holes() listed above, which is located in the header file print_utils.h under the examples folder.
File: examples/Boolean_set_operations_2/simple_join_intersect.cpp
/*! \file simple_join_intersect.cpp * Computing the union and the intersection of two simple polygons. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/Boolean_set_operations_2.h> #include <list> // instead of //typedef CGAL::Cartesian<Number_type> Kernel; // workaround for VC++ struct Kernel : public CGAL::Cartesian<Number_type> {}; typedef Kernel::Point_2 Point_2; typedef CGAL::Polygon_2<Kernel> Polygon_2; typedef CGAL::Polygon_with_holes_2<Kernel> Polygon_with_holes_2; typedef std::list<Polygon_with_holes_2> Pwh_list_2; #include "print_utils.h" int main () { // Construct the two input polygons. Polygon_2 P; P.push_back (Point_2 (0, 0)); P.push_back (Point_2 (5, 0)); P.push_back (Point_2 (3.5, 1.5)); P.push_back (Point_2 (2.5, 0.5)); P.push_back (Point_2 (1.5, 1.5)); std::cout << "P = "; print_polygon (P); Polygon_2 Q; Q.push_back (Point_2 (0, 2)); Q.push_back (Point_2 (1.5, 0.5)); Q.push_back (Point_2 (2.5, 1.5)); Q.push_back (Point_2 (3.5, 0.5)); Q.push_back (Point_2 (5, 2)); std::cout << "Q = "; print_polygon (Q); // Compute the union of P and Q. Polygon_with_holes_2 unionR; if (CGAL::join (P, Q, unionR)) { std::cout << "The union: "; print_polygon_with_holes (unionR); } else std::cout << "P and Q are disjoint and their union is trivial." << std::endl; std::cout << std::endl; // Compute the intersection of P and Q. Pwh_list_2 intR; Pwh_list_2::const_iterator it; CGAL::intersection (P, Q, std::back_inserter(intR)); std::cout << "The intersection:" << std::endl; for (it = intR.begin(); it != intR.end(); ++it) { std::cout << "--> "; print_polygon_with_holes (*it); } return 0; }
The following example demonstrates how to compute the symmetric difference between two sets that contain holes. Each set is a rectangle that contains a rectangular hole in its interior, such that the symmetric difference between the two sets is a single polygon that contains of five holes:
File: examples/Boolean_set_operations_2/symmetric_difference.cpp
/*! \file symmetric_difference.cpp * Computing the symmetric difference of two polygons with holes. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/Boolean_set_operations_2.h> #include <list> // instead of //typedef CGAL::Cartesian<Number_type> Kernel; // workaround for VC++ struct Kernel : public CGAL::Cartesian<Number_type> {}; typedef Kernel::Point_2 Point_2; typedef CGAL::Polygon_2<Kernel> Polygon_2; typedef CGAL::Polygon_with_holes_2<Kernel> Polygon_with_holes_2; typedef std::list<Polygon_with_holes_2> Pwh_list_2; #include "print_utils.h" int main () { // Construct P - a bounded rectangle that contains a rectangular hole. Polygon_2 outP; Polygon_2 holesP[1]; outP.push_back (Point_2 (-3, -5)); outP.push_back (Point_2 (3, -5)); outP.push_back (Point_2 (3, 5)); outP.push_back (Point_2 (-3, 5)); holesP[0].push_back (Point_2 (-1, -3)); holesP[0].push_back (Point_2 (-1, 3)); holesP[0].push_back (Point_2 (1, 3)); holesP[0].push_back (Point_2 (1, -3)); Polygon_with_holes_2 P (outP, holesP, holesP + 1); std::cout << "P = "; print_polygon_with_holes (P); // Construct Q - a bounded rectangle that contains a rectangular hole. Polygon_2 outQ; Polygon_2 holesQ[1]; outQ.push_back (Point_2 (-5, -3)); outQ.push_back (Point_2 (5, -3)); outQ.push_back (Point_2 (5, 3)); outQ.push_back (Point_2 (-5, 3)); holesQ[0].push_back (Point_2 (-3, -1)); holesQ[0].push_back (Point_2 (-3, 1)); holesQ[0].push_back (Point_2 (3, 1)); holesQ[0].push_back (Point_2 (3, -1)); Polygon_with_holes_2 Q (outQ, holesQ, holesQ + 1); std::cout << "Q = "; print_polygon_with_holes (Q); // Compute the symmetric difference of P and Q. Pwh_list_2 symmR; Pwh_list_2::const_iterator it; CGAL::symmetric_difference (P, Q, std::back_inserter(symmR)); std::cout << "The symmetric difference:" << std::endl; for (it = symmR.begin(); it != symmR.end(); ++it) { std::cout << "--> "; print_polygon_with_holes (*it); } return 0; }
In some cases it is convinient to connect the outer boundary of a polygon with holes with the holes inside it. The function connect_holes() accepts a polygon with holes, and connects the topmost vertex in each hole with the polygon feature located directly above it (a vertex or an edge of the outer boundary, or of another hole). It produces an output sequence of points that match the traversal of all vertices in the connected polygon (note that there are additional vertices, induced by the vertical walls).
File: examples/Boolean_set_operations_2/connect_polygon.cpp
/*! \file connect_polygon.cpp * Connecting a polygon with holes. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/connect_holes.h> #include <list> typedef CGAL::Cartesian<Number_type> Kernel; typedef Kernel::Point_2 Point_2; typedef CGAL::Polygon_2<Kernel> Polygon_2; typedef CGAL::Polygon_with_holes_2<Kernel> Polygon_with_holes_2; int main (int argc, char **argv) { // Get the name of the input file from the command line, or use the default // pgn_holes.dat file if no command-line parameters are given. //more data files can be found under test data //boundary no other connections are made. const char *filename = (argc > 1) ? argv[1] : "pgn_holes.dat"; std::ifstream input_file (filename); if (! input_file.is_open()) { std::cerr << "Failed to open the " << filename <<std::endl; return (1); } // Read a polygon with holes from a file. Polygon_2 outerP; unsigned int num_holes; input_file >> outerP; input_file >> num_holes; std::vector<Polygon_2> holes (num_holes); unsigned int k; for (k = 0; k < num_holes; k++) input_file >> holes[k]; Polygon_with_holes_2 P (outerP, holes.begin(), holes.end()); // Connect the outer boundary of the polygon with its holes. std::list<Point_2> pts; std::list<Point_2>::iterator pit; connect_holes (P, std::back_inserter (pts)); for (pit = pts.begin(); pit != pts.end(); ++pit) std::cout << '(' << *pit << ") "; std::cout << std::endl; return (0); }
We argue that the result of a regularized operations on two polygons (or polygons with holes) P and Q is typically a collection of several disconnected polygons with holes. It is only natural to represent such a collection in terms of a class, making it possible to operate on the set resulting from computing, for example, P \ Q.
A central component in the Boolean set-operations package is the Polygon_set_2<Kernel, Container, Dcel> class-template. An instance of this class represents a point set formed by the collection of several disconnected polygons with holes. It employs the Arrangement_2 class to represent this point set in the plane as a planar arrangement; see Chapter 28. The instantiated Dcel type is used to represent the underlying internal arrangement. It must model the concept GeneralPolygonSetDcel, and defaults to Gps_default_dcel. You can override this default, with a different Dcel class, typically an extension of the default. Overriding the default is necessary only if you intend to obtain the underlying internal arrangement and process it further.
An instance S of a Polygon_set_2 class usually represents the result of a sequence of operations that were applied on some input polygons. The representation of S is unique, regardless of the particular sequence of operations that were applied in order to arrive at it.
In addition, a polygon-set object can be constructed from a single polygon object or from a polygon-with-holes object. Once constructed, it is possible to insert new polygons (or polygons with holes) into the set using the insert() method, as long as the inserted polygons and the existing polygons in the set are disjoint. The Polygon_set_2 class also provides access functions for accessing the polygons with holes it contains, and a few queries. The most improtant query is S.oriented_side(q), which determined whether the query point q is contained in the interior of the set S, lies on the boundary of the set, or neither.
The General_polygon_set_2 class defines the predicate do_intersect() and the methods complement(), intersection(), join(), difference() and symmetric_difference() as member functions. The operands to these functions may be simple polygons (Polygon_2 object), polygons with holes (General_polygon_with_holes_2 objects), or polygon sets (General_polygon_set_2 objects). Thus, each of the function mentioned above is actually realized by a set overriding member functions.
Member functions of the General_polygon_set_2 that perform Boolean set-operations come in two flavors: for example, S.join(P, Q) computes the union of P and Q and assigned the reuslt to S, while S.join(P) preformes the operation S ← S ∪ P. Similarly, S.complement(P) sets S to be the complement of P, while S.complement() simply negates the set S.
The free functions reviewed in Section 17.3.1 serve as a wrapper for the polygon-set class, and are only provided for convinience. A typical such function constructs a pair of General_polygon_set_2 objects, invokes the appropriate method to apply the desired Boolean operation, and transforms the resulting polygon set to the required output format. Thus, when several operations are performed in a sequence, it is much more efficient to use the member functions of the General_polygon_set_2 type directly, as the extraction of the polygons from the internal representation for some operation, and the reconstruction of the internal representation for the succeeding operation could be time consuming.
File: examples/Boolean_set_operations_2/sequence.cpp
/*! \file sequence.cpp * Performing a sequence of Boolean set-operations. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/Polygon_2.h> #include <CGAL/Polygon_with_holes_2.h> #include <CGAL/Polygon_set_2.h> #include <list> // instead of //typedef CGAL::Cartesian<Number_type> Kernel; // workaround for VC++ struct Kernel : public CGAL::Cartesian<Number_type> {}; typedef Kernel::Point_2 Point_2; typedef CGAL::Polygon_2<Kernel> Polygon_2; typedef CGAL::Polygon_with_holes_2<Kernel> Polygon_with_holes_2; typedef CGAL::Polygon_set_2<Kernel> Polygon_set_2; #include "print_utils.h" int main () { // Construct the two initial polygons and the clipping rectangle. Polygon_2 P; P.push_back (Point_2 (0, 1)); P.push_back (Point_2 (2, 0)); P.push_back (Point_2 (1, 1)); P.push_back (Point_2 (2, 2)); Polygon_2 Q; Q.push_back (Point_2 (3, 1)); Q.push_back (Point_2 (1, 2)); Q.push_back (Point_2 (2, 1)); Q.push_back (Point_2 (1, 0)); Polygon_2 rect; rect.push_back (Point_2 (0, 0)); rect.push_back (Point_2 (3, 0)); rect.push_back (Point_2 (3, 2)); rect.push_back (Point_2 (0, 2)); // Perform a sequence of operations. Polygon_set_2 S; S.insert (P); S.join (Q); // Compute the union of P and Q. S.complement(); // Compute the complement. S.intersection (rect); // Intersect with the clipping rectangle. // Print the result. std::list<Polygon_with_holes_2> res; std::list<Polygon_with_holes_2>::const_iterator it; std::cout << "The result contains " << S.number_of_polygons_with_holes() << " components:" << std::endl; S.polygons_with_holes (std::back_inserter (res)); for (it = res.begin(); it != res.end(); ++it) { std::cout << "--> "; print_polygon_with_holes (*it); } return 0; }
If you want to compute the union of a polygon P (P may be a simple polygon or a polygon-with-holes object) with a general-polygon set R, and store the result in R, you can construct a polygon set S(P), and apply the union operation as follows:
General_polygon_2 S (P); R.join (S);
As a matter of fact, you can apply the union operation directly:
R.join (P);
However, if you know that the polygon does not intersect any one of the polygons represented by R, you can use the more efficient method insert():
R.insert (P);
As insert() assumes that P ∩ R = ∅, it does not try to compute intersections between the boundaries of P and of R. This fact significantly speeds up the insertion process in comparison with the insertion of a non-disjoint polygon that intersects R.
The insert() function is also overloaded, so it can also accept a range of polygons. When a range of polygons are inserted into a polygon set S, all the polygons in the range and the polygons represented by S must be pairwise disjoint in their interiors.
There are a few options to compute the union of a set of polygons P_{1}, … P_{m}. You can do it incrementally as follows. At each step compute the union of S_{k-1} = ∪_{i=1}^{k-1}P_{i} with P_{k} and obtain S_{k}. Namely, if the polygon set is given as a pair of iterator [begin, end), the following loop computes their union in S.
InputIterator iter = begin; Polygon_set_2 S (*iter); while (++iter != end) { S.join (*iter); ++iter; }A second option is to use a divide-and-conquer approach. You bisect the set of polygons into two sets. Compute the union of each set recursively and obtain the partial results in S_{1} and S_{2}, and finally, you compute the union S_{1} ∪ S_{2}. However, the union operation can be done more efficiently for sparse polygons, having a relatively small number of intersections, using a third option that simultaneously computes the union of all polygons. This is done by constructing a planar arrangement of all input polygons, utilizing the sweep-line algorithm, then extracting the result from the arrangement. Similarly, it is also possible to aggregately compute the intersection ∩_{i=1}^{m}P_{i} of a set of input polygons.
Our package provides the free overloaded functions join() and intersect() that aggregately compute the union and the intersection of a range of input polygons. There is no restriction on the polygons in the range - naturally, they may intersect each other. The package provides the overloaded free function do_intersect(begin, end) that determines whether the polygons in the range defined by the two input iterators [begin, end) intersect.
The class General_polygon_set_2 also provides equivalent member functions that aggragately operate on a range of input polygons or polygons with holes. When such a member function is called, the general polygons represented by the current object are considered operands as well. Thus, you can easily compute the union of our polygon range as follows:
Polygon_set_2 S; S.join (begin, end);
Using the topological terminology, a general polygon can represent any simply-connected point set whose boundary is a strictly simple curve. Such a polygon is a model of the GeneralPolygon_2 concept. A model of this concept must fulfill the following requirements:
The central class-template General_polygon_set_2<Traits,Dcel> is used to represent point sets that are comprised of a finite number of pairwise disjoint general polygons with holes, and provides various Boolean set-operations on such sets. It is parameterized by a traits class and a Dcel class. The former defines the type of points used to represent polygon vertices and the type of x-monotone curves that represent the polygon edges. The traits class also provides primitive geometric operations that operate on objects of these types. The Dcel class is used to represent the underlying internal Arrangement_2 data structure. The instantiated Dcel type is used to represent the underlying internal arrangement. It must model the concept GeneralPolygonSetDcel, and defaults to Gps_default_dcel. You can override this default, with a different Dcel class, typically an extension of the default. Overriding the default is necessary only if you intend to obtain the underlying internal arrangement and process it further.
An instantiated General_polygon_set_2 class defines the nested types General_polygon_set_2<Traits,Dcel>::Polygon_2 and General_polygon_set_2<Traits,Dcel>::Polygon_with_holes_2, which model the concepts GeneralPolygon_2 and GeneralPolygonWithHoles_2 respectively.
The traits class used to instantiate the General_polygon_set_2 class template must model the concept GeneralPolygonSetTraits_2, and is tailored to handle a specific family of curves. The concept GeneralPolygonSetTraits_2 refines the concept ArrangementDirectionalXMonotoneTraits_2 specified next.
The concept ArrangementDirectionalXMonotoneTraits_2 refines the concept ArrangementXMonotoneTraits_2 (see Section 28.4.1.2 in the 2D Arrangements chapter). Thus, a model of this concept must define the type X_monotone_curve_2, which represents an x-monotone curve, and the type Point_2, with represents a planar point. Such a point may be an endpoint of an x-monotone curve or an intersection point between two curves. It must also provide various geometric predicates and operations on these types listed by the base concept, such as determining whether a point lies above or below an x-monotone curve, computing the intersections between two curves, etc. Note that the base concept does not assume that x-monotone curves are directed: an x-monotone curve is not required to have a designated source and target, it is only required to determine the left (lexicographically smaller) and the right (lexicographically larger) endpoints of a given curve.
The ArrangementDirectionalXMonotoneTraits_2 concept treats its x-monotone curves as directed objects. It thus requires two additional operations on x-monotone curves:
The traits classes Arr_segment_traits_2, Arr_non_caching_segment_traits, Arr_circle_segment_traits_2, Arr_conic_traits_2 and Arr_rational_arc_traits_2, which are bundled in the Arrangement_2 package and distributed with Cgal, are all models of the refined concept ArrangementDirectionalXMonotoneTraits_2.^{3}
Just as with the case of computations using models of the ArrangementXMonotoneTraits_2 concept, operations are robust only when exact arithmetic is used. When inexact arithmetic is used, (nearly) degenerate configurations may result in abnormal termination of the program or even incorrect results.
Two traits classes are distributed with Cgal. The first one is named Gps_segment_traits_2, and it is used to perform Boolean set-operations on ordinary polygons and polygons with holes. In fact, the class Polygon_set_2 introduced in Section 17.3.2 is a specialization of General_polygon_set_2<Gps_segment_traits_2>. This class defined its polygon and polygon with holes types, such that the usage of this traits class is encapsulated in the polygon-set class.
The other predefined traits class is named Gps_circle_segment_traits_2<Kernel> and is parameterized by a geometric Cgal kernel. By instantiating the General_polygon_set_2 with this traits class, we obtain the representation of a polygon whose boundary may be comprised of line segments and circular arcs. The circle-segment traits class provides predicates and constructions on non-linear objects; yet, it uses only rational arithmetic and is very efficient as a consequence.
File: examples/Boolean_set_operations_2/circle_segment.cpp
/*! \file circle_segment.cpp * Handling circles and linear segments concurrently. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/Gps_circle_segment_traits_2.h> #include <CGAL/General_polygon_set_2.h> #include <CGAL/General_polygon_with_holes_2.h> #include <CGAL/Lazy_exact_nt.h> #include <list> typedef CGAL::Lazy_exact_nt<Number_type> Lazy_exact_nt; typedef CGAL::Cartesian<Lazy_exact_nt> Kernel; typedef Kernel::Point_2 Point_2; typedef Kernel::Circle_2 Circle_2; typedef CGAL::Gps_circle_segment_traits_2<Kernel> Traits_2; typedef CGAL::General_polygon_set_2<Traits_2> Polygon_set_2; typedef Traits_2::General_polygon_2 Polygon_2; typedef Traits_2::General_polygon_with_holes_2 Polygon_with_holes_2; typedef Traits_2::Curve_2 Curve_2; typedef Traits_2::X_monotone_curve_2 X_monotone_curve_2; // Construct a polygon from a circle. Polygon_2 construct_polygon (const Circle_2& circle) { // Subdivide the circle into two x-monotone arcs. Traits_2 traits; Curve_2 curve (circle); std::list<CGAL::Object> objects; traits.make_x_monotone_2_object() (curve, std::back_inserter(objects)); CGAL_assertion (objects.size() == 2); // Construct the polygon. Polygon_2 pgn; X_monotone_curve_2 arc; std::list<CGAL::Object>::iterator iter; for (iter = objects.begin(); iter != objects.end(); ++iter) { CGAL::assign (arc, *iter); pgn.push_back (arc); } return pgn; } // Construct a point from a rectangle. Polygon_2 construct_polygon (const Point_2& p1, const Point_2& p2, const Point_2& p3, const Point_2& p4) { Polygon_2 pgn; X_monotone_curve_2 s1(p1, p2); pgn.push_back(s1); X_monotone_curve_2 s2(p2, p3); pgn.push_back(s2); X_monotone_curve_2 s3(p3, p4); pgn.push_back(s3); X_monotone_curve_2 s4(p4, p1); pgn.push_back(s4); return pgn; } // The main program: int main () { // Insert four non-intersecting circles. Polygon_set_2 S; Polygon_2 circ1, circ2, circ3, circ4; circ1 = construct_polygon(Circle_2(Point_2(1, 1), 1)); S.insert(circ1); circ2 = construct_polygon(Circle_2(Point_2(5, 1), 1)); S.insert(circ2); circ3 = construct_polygon(Circle_2(Point_2(5, 5), 1)); S.insert(circ3); circ4 = construct_polygon(Circle_2(Point_2(1, 5), 1)); S.insert(circ4); // Compute the union with four rectangles incrementally. Polygon_2 rect1, rect2, rect3, rect4; rect1 = construct_polygon(Point_2(1, 0), Point_2(5, 0), Point_2(5, 2), Point_2(1, 2)); S.join (rect1); rect2 = construct_polygon(Point_2(1, 4), Point_2(5, 4), Point_2(5, 6), Point_2(1, 6)); S.join (rect2); rect3 = construct_polygon(Point_2(0, 1), Point_2(2, 1), Point_2(2, 5), Point_2(0, 5)); S.join (rect3); rect4 = construct_polygon(Point_2(4, 1), Point_2(6, 1), Point_2(6, 5), Point_2(4, 5)); S.join (rect4); // Print the output. std::list<Polygon_with_holes_2> res; S.polygons_with_holes (std::back_inserter (res)); std::copy (res.begin(), res.end(), std::ostream_iterator<Polygon_with_holes_2>(std::cout, "\n")); std::cout << std::endl; return 0; }
The concept GeneralPolygon_2 and its generic model General_polygon_2<ArrDirectionalXMonotoneTraits> facilitate the production of general-polygon set traits classes. A model of the concept GeneralPolygon_2 represents a simple point-set in the plane bounded by x-monotone curves. As opposed to the plain Traits::Polygon_2 type defined by any traits class, it must define the type X_monotone_curve_2, which represents an x-monotone curve of the point-set boundary. It must provide a constructor from a range of such curves, and a pair of methods, namely curves_begin() and curves_end(), that can be used to iterate over the point-set boundary curves.
The class-template General_polygon_2<ArrDirectionalXMonotoneTraits> models the concept GeneralPolygon_2. Its sole template parameter must be instantiated with a model of the concept ArrangementDirectionalXMonotoneTraits_2 from which it obtains the X_monotone_curve_2 type. It uses the geometric operations on this type provided by such a model to maintain a container of directed curves of type X_monotone_curve_2, which represents a boundary of the general polygon.
The class-template Gps_traits_2<ArrDirectionalXMonotoneTraits,GeneralPolygon> models the concept GeneralPolygonSetTraits_2, and can be used to instantiate the class template General_polygon_set_2. It serves as an adapter for a geoemtric traits class, which models the concept ArrangementDirectionalXMonotoneTraits_2. It can be used for performing set-operations on general polygons. The implementation of the adapetr is rather simple, as it is derived from the instantiated template-parameter ArrXMonotoneTraits_2 inheriting its necessary types and methods. It further exploits the methods provided by the instantiated parameter GeneralPolygon, which is a model of the concept GeneralPolygon_2. By default, the GeneralPolygon parameter is defined as General_polygon_2<ArrangementDirectionalXMonotoneTraits_2>.
The code excerpt listed below defines a general-polygon set type that can be used to perform Boolean set-operations on point sets bounded by the x-monotone curve type defined by the arrangement-traits class Arr_traits_2, which is some representative model of the concept ArrangementDirectionalXMonotoneTraits_2.
#include <CGAL/General_polygon_2.h> #include <CGAL/Gps_traits_2.h> typedef CGAL::General_polygon_2<Arr_traits_2> General_polygon_2; typedef CGAL::Gps_traits_2<Arr_traits_2, General_polygon_2> Traits_2; typedef CGAL::General_polygon_set_2<Traits_2> General_polygon_set_2;
The next example computes the intersection of two general polygons bounded by Bézier curves read from two input files respectively. The default input files our example uses (char_g.dat and char_m.dat) define two general polygons shaped in the form of the characters g and m in the Times New Roman font respectively. Their intersection comprises nine simple polygons, as depicted to the right.
Recall that every Bézier curve is defined by a sequence of control points that form chains (see Section 28.6.7. The last control point of every curve must be identical to the first control point of its successor. The function read_Bezier_polygon() included in the example reads the curves from an input file until they form a closed chain, which is assumed to be the outer boundary of the polygon. If more curves are available, its starts constructing polygons that correspond to holes in the area bounded by the outer boundary. Note that this function is also responsible for subdividing the input Bézier curves into x-monotone subcurves, as required by the Gps_traits_2 adapter.
File: examples/Boolean_set_operations_2/bezier_traits_adapter.cpp
/*! \file bezier_traits_adapter.cpp * Using the traits adaptor to generate a traits class for Bezier polygons. */ #include <CGAL/basic.h> #ifndef CGAL_USE_CORE #include <iostream> int main () { std::cout << "Sorry, this example needs CORE ..." << std::endl; return (0); } #else #include <CGAL/Cartesian.h> #include <CGAL/CORE_algebraic_number_traits.h> #include <CGAL/Arr_Bezier_curve_traits_2.h> #include <CGAL/Arrangement_2.h> #include <CGAL/Gps_traits_2.h> #include <CGAL/Boolean_set_operations_2.h> #include <CGAL/Timer.h> #include <fstream> typedef CGAL::CORE_algebraic_number_traits Nt_traits; typedef Nt_traits::Rational Rational; typedef Nt_traits::Algebraic Algebraic; // instead of // typedef CGAL::Cartesian<Rational> Rat_kernel; // typedef CGAL::Cartesian<Algebraic> Alg_kernel; // typedef CGAL::Arr_Bezier_curve_traits_2<Rat_kernel, Alg_kernel, Nt_traits> // Traits_2; // workaround for VC++ struct Rat_kernel : public CGAL::Cartesian<Rational> {}; struct Alg_kernel : public CGAL::Cartesian<Algebraic> {}; struct Traits_2 : public CGAL::Arr_Bezier_curve_traits_2<Rat_kernel, Alg_kernel, Nt_traits> {}; typedef Rat_kernel::Point_2 Rat_point_2; typedef Traits_2::Curve_2 Bezier_curve_2; typedef Traits_2::X_monotone_curve_2 X_monotone_curve_2; typedef CGAL::Gps_traits_2<Traits_2> Gps_traits_2; typedef Gps_traits_2::General_polygon_2 Polygon_2; typedef Gps_traits_2::General_polygon_with_holes_2 Polygon_with_holes_2; typedef std::list<Polygon_with_holes_2> Polygon_set; /*! Read a general polygon with holes, formed by Bezier curves, from the * given input file. */ bool read_Bezier_polygon (const char* filename, Polygon_with_holes_2& P) { // Open the input file. std::ifstream in_file (filename); if (! in_file.is_open()) return false; // Read the number of curves. unsigned int n_curves; unsigned int k; in_file >> n_curves; // Read the curves one by one, and construct the general polygon these // curve form (the outer boundary and the holes inside it). Traits_2 traits; Traits_2::Make_x_monotone_2 make_x_monotone = traits.make_x_monotone_2_object(); bool first = true; Rat_point_2 p_0; std::list<X_monotone_curve_2> xcvs; Rat_kernel ker; Rat_kernel::Equal_2 equal = ker.equal_2_object(); std::list<Polygon_2> pgns; for (k = 0; k < n_curves; k++) { // Read the current curve and subdivide it into x-monotone subcurves. Bezier_curve_2 B; std::list<CGAL::Object> x_objs; std::list<CGAL::Object>::const_iterator xoit; X_monotone_curve_2 xcv; in_file >> B; make_x_monotone (B, std::back_inserter (x_objs)); for (xoit = x_objs.begin(); xoit != x_objs.end(); ++xoit) { if (CGAL::assign (xcv, *xoit)) xcvs.push_back (xcv); } // Check if the current curve closes a polygon, namely whether it target // point (the last control point) equals the source of the first curve in // the current chain. if (! first) { if (equal (p_0, B.control_point(B.number_of_control_points() - 1))) { // Push a new polygon into the polygon list. Make sure that the polygon // is counterclockwise oriented if it represents the outer boundary // and clockwise oriented if it represents a hole. Polygon_2 pgn (xcvs.begin(), xcvs.end()); CGAL::Orientation orient = pgn.orientation(); if ((pgns.empty() && orient == CGAL::CLOCKWISE) || (! pgns.empty() && orient == CGAL::COUNTERCLOCKWISE)) pgn.reverse_orientation(); pgns.push_back (pgn); xcvs.clear(); first = true; } } else { // This is the first curve in the chain - store its source point. p_0 = B.control_point(0); first = false; } } if (! xcvs.empty()) return false; // Construct the polygon with holes. std::list<Polygon_2>::iterator pit = pgns.begin(); ++pit; P = Polygon_with_holes_2 (pgns.front(), pit, pgns.end()); return true; } // The main program. int main (int argc, char **argv) { // Get the name of the input files from the command line, or use the default // char_g.dat and char_m.dat files if no command-line parameters are given. const char *filename1 = (argc > 1) ? argv[1] : "char_g.dat"; const char *filename2 = (argc > 2) ? argv[2] : "char_m.dat"; // Read the general polygons from the input files. CGAL::Timer timer; Polygon_with_holes_2 P1, P2; timer.start(); if (! read_Bezier_polygon (filename1, P1)) { std::cerr << "Failed to read " << filename1 << " ..." << std::endl; return 1; } if (! read_Bezier_polygon (filename2, P2)) { std::cerr << "Failed to read " << filename2 << " ..." << std::endl; return 1; } timer.stop(); std::cout << "Constructed the input polygons in " << timer.time() << " seconds." << std::endl << std::endl; // Compute the intersection of the two polygons. Polygon_set R; Polygon_set::const_iterator rit; timer.reset(); timer.start(); CGAL::intersection (P1, P2, std::back_inserter(R)); timer.stop(); std::cout << "The intersection polygons are of sizes: {"; for (rit = R.begin(); rit != R.end(); ++rit) std::cout << ' ' << rit->outer_boundary().size(); std::cout << " }" << std::endl; std::cout << "The intersection computation took " << timer.time() << " seconds." << std::endl; return 0; } #endif
In Section 17.3.3 we describe how aggregated union and intersection operations can be applied to a collection of ordinary polygons or polygons with holes. Naturally, the aggregated operations can be applied also to collections of general polygons. As was the case with ordinary polygons, using aggregated operations is recommended when the number of intersections of the input polygons is of the same order of magnitude as the complexity of the result. If this is not the case, computing the result incrementally may prove faster.
File: examples/Boolean_set_operations_2/set_union.cpp
/*! \file set_union.cpp * Computing the union of a set of circles. */ #include "bso_rational_nt.h" #include <CGAL/Cartesian.h> #include <CGAL/Gps_circle_segment_traits_2.h> #include <CGAL/Boolean_set_operations_2.h> #include <CGAL/Lazy_exact_nt.h> #include <list> #include <cstdlib> #include <cmath> typedef CGAL::Lazy_exact_nt<Number_type> Lazy_exact_nt; typedef CGAL::Cartesian<Lazy_exact_nt> Kernel; typedef Kernel::Point_2 Point_2; typedef Kernel::Circle_2 Circle_2; typedef CGAL::Gps_circle_segment_traits_2<Kernel> Traits_2; typedef CGAL::General_polygon_set_2<Traits_2> Polygon_set_2; typedef Traits_2::Polygon_2 Polygon_2; typedef Traits_2::Polygon_with_holes_2 Polygon_with_holes_2; typedef Traits_2::Curve_2 Curve_2; typedef Traits_2::X_monotone_curve_2 X_monotone_curve_2; // Construct a polygon from a circle. Polygon_2 construct_polygon (const Circle_2& circle) { // Subdivide the circle into two x-monotone arcs. Traits_2 traits; Curve_2 curve (circle); std::list<CGAL::Object> objects; traits.make_x_monotone_2_object() (curve, std::back_inserter(objects)); CGAL_assertion (objects.size() == 2); // Construct the polygon. Polygon_2 pgn; X_monotone_curve_2 arc; std::list<CGAL::Object>::iterator iter; for (iter = objects.begin(); iter != objects.end(); ++iter) { CGAL::assign (arc, *iter); pgn.push_back (arc); } return pgn; } // The main program: int main (int argc, char * argv[]) { // Read the number of circles from the command line. unsigned int n_circles = 8; if (argc > 1) n_circles = std::atoi(argv[1]); // Create the circles, equally spaced of the circle x^2 + y^2 = 1. const double pi = std::atan(1.0) * 4; const double n_circles_reciep = 1.0 / n_circles; const double radius = 1; const double frac = 2 * pi * n_circles_reciep; std::list<Polygon_2> circles; unsigned int k; for (k = 0; k < n_circles; k++) { const double angle = frac * k; const double x = radius * std::sin(angle); const double y = radius * std::cos(angle); Point_2 center = Point_2(x, y); Circle_2 circle(center, radius); circles.push_back (construct_polygon (circle)); } // Compute the union aggragately. std::list<Polygon_with_holes_2> res; CGAL::join (circles.begin(), circles.end(), std::back_inserter (res)); // Print the result. std::copy (res.begin(), res.end(), std::ostream_iterator<Polygon_with_holes_2>(std::cout, "\n")); std::cout << std::endl; return 0; }
^{1} | A continuous planar curve C is weakly x-monotone if every vertical line intersects it at most once, or if it is vertical. Hereafter we refer to weakly x-monotone curves as x-monotone curves. |
^{2} | The function that computes the union of two polygons is called join(), since the word union is reserved in C++. |
^{3} | The Arr_polyline_traits_2 class is not a model of the, ArrangementDirectionalXMonotoneTraits_2 concept, as the x-monotone curve it defines is always directed from left to right. Thus, an opposite curve cannot be constructed. However, it is not very useful to construct a polygon whose edges are polylines, as an ordinary polygon with linear edges can represent the same entity. |