Orbifold Helper Functions

Functions
template<typename TriangleMesh , typename VertexIndexMap , typename ConeOutputIterator >
Error_code	CGAL::Surface_mesh_parameterization::read_cones (const TriangleMesh &tm, std::ifstream &in, VertexIndexMap vpmap, ConeOutputIterator out)
	reads a series of cones from an input stream. More...
template<typename TriangleMesh , typename ConeOutputIterator >
Error_code	CGAL::Surface_mesh_parameterization::read_cones (const TriangleMesh &tm, std::ifstream &in, ConeOutputIterator out)
	Same as above, using the default indexation of the vertices of tm: vertices are numbered from 0 to num_vertices(tm)-1, in the order that they appear while calling vertices(tm). More...
template<typename TriangleMesh , typename VertexIndexMap , typename ConeOutputIterator >
Error_code	CGAL::Surface_mesh_parameterization::read_cones (const TriangleMesh &tm, const char *filename, VertexIndexMap vpmap, ConeOutputIterator out)
	Same as above, but from a file instead of a stream. More...
template<typename TriangleMesh , typename ConeOutputIterator >
Error_code	CGAL::Surface_mesh_parameterization::read_cones (const TriangleMesh &tm, const char *filename, ConeOutputIterator out)
	Same as above, but from a file instead of a stream. More...
template<typename SeamMesh , typename ConeInputBidirectionalIterator , typename ConeMap >
bool	CGAL::Surface_mesh_parameterization::locate_cones (const SeamMesh &mesh, ConeInputBidirectionalIterator first, ConeInputBidirectionalIterator beyond, ConeMap &cones)
	locates the cones on the seam mesh (that is, find the corresponding seam mesh vertex_descriptor) and mark them with a tag to indicate whether the cone is a simple cone or a duplicated cone (see Cone_type ). More...
template<typename SeamMesh , typename ConeInputBidirectionalIterator , typename ConeMap >
bool	CGAL::Surface_mesh_parameterization::locate_unordered_cones (const SeamMesh &mesh, ConeInputBidirectionalIterator first, ConeInputBidirectionalIterator beyond, ConeMap &cones)
	Same as above, but the cones are not ordered and we thus use seam mesh information to determine which cones are extremities of the seam (so-called unique cones) or not (so-called duplicate cones). More...
template<typename TriangleMesh , typename EdgeOutputIterator >
void	CGAL::Surface_mesh_parameterization::compute_shortest_paths_between_two_cones (const TriangleMesh &mesh, typename boost::graph_traits< TriangleMesh >::vertex_descriptor source, typename boost::graph_traits< TriangleMesh >::vertex_descriptor target, EdgeOutputIterator oi)
	computes the shortest path between source and target over mesh, using boost::dijkstra_shortest_paths(). More...
template<typename TriangleMesh , typename InputConesForwardIterator , typename SeamContainer >
void	CGAL::Surface_mesh_parameterization::compute_shortest_paths_between_cones (const TriangleMesh &mesh, InputConesForwardIterator first, InputConesForwardIterator beyond, SeamContainer &seams)
	Given a range [first; beyond[ of cones (described as vertex descriptors), compute the shortest path for all pairs of consecutive entries in the range and add them to the container seams. More...

Function Documentation

compute_shortest_paths_between_cones()

template<typename TriangleMesh , typename InputConesForwardIterator , typename SeamContainer >

void CGAL::Surface_mesh_parameterization::compute_shortest_paths_between_cones	(	const TriangleMesh &	mesh,
		InputConesForwardIterator	first,
		InputConesForwardIterator	beyond,
		SeamContainer &	seams
	)

#include <CGAL/Surface_mesh_parameterization/orbifold_shortest_path.h>

Given a range [first; beyond[ of cones (described as vertex descriptors), compute the shortest path for all pairs of consecutive entries in the range and add them to the container seams.

Template Parameters

TriangleMesh	A triangle mesh, model of FaceListGraph and HalfedgeListGraph.
InputConesForwardIterator	A model of ForwardIterator with value type boost::graph_traits<TriangleMesh>::vertex_descriptor.
SeamContainer	A model of SequenceContainer with value type boost::graph_traits<TriangleMesh>::edge_descriptor.

Parameters

mesh	the triangular mesh on which paths are computed
first,beyond	a range of cones
seams	a container that will store the paths, as a sequence of edges of the mesh.

Precondition

std::distance(first,beyond) > 1

Examples:

Surface_mesh_parameterization/orbifold.cpp.

compute_shortest_paths_between_two_cones()

template<typename TriangleMesh , typename EdgeOutputIterator >

void CGAL::Surface_mesh_parameterization::compute_shortest_paths_between_two_cones	(	const TriangleMesh &	mesh,
		typename boost::graph_traits< TriangleMesh >::vertex_descriptor	source,
		typename boost::graph_traits< TriangleMesh >::vertex_descriptor	target,
		EdgeOutputIterator	oi
	)

#include <CGAL/Surface_mesh_parameterization/orbifold_shortest_path.h>

computes the shortest path between source and target over mesh, using boost::dijkstra_shortest_paths().

Template Parameters

TriangleMesh	A triangle mesh, model of FaceListGraph and HalfedgeListGraph.
EdgeOutputIterator	A model of OutputIterator with value type boost::graph_traits<TriangleMesh>::edge_descriptor.

Parameters

mesh	the triangular mesh to be parameterized
source,target	the extremities of the path to be computed
oi	the output iterator

Precondition

source and target are vertices of mesh.

source != target

locate_cones()

template<typename SeamMesh , typename ConeInputBidirectionalIterator , typename ConeMap >

bool CGAL::Surface_mesh_parameterization::locate_cones	(	const SeamMesh &	mesh,
		ConeInputBidirectionalIterator	first,
		ConeInputBidirectionalIterator	beyond,
		ConeMap &	cones
	)

#include <CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h>

locates the cones on the seam mesh (that is, find the corresponding seam mesh vertex_descriptor) and mark them with a tag to indicate whether the cone is a simple cone or a duplicated cone (see Cone_type ).

Attention

The cones must be ordered: the first and last cones are the extremities of the seam.

Template Parameters

SeamMesh	is the same mesh that is passed to the parameterizer. It is an object of typeCGAL::Seam_mesh, but is passed here as a template parameter for convenience, to avoid having to pass the multiple template parameters of the class CGAL::Seam_mesh.
ConeInputBidirectionalIterator	must be a model of BidirectionalIterator with value type boost::graph_traits<SeamMesh::Triangle_mesh>::vertex_descriptor.
ConeMap	must be a model of AssociativeContainer with boost::graph_traits<SeamMesh>::vertex_descriptor as key type and Cone_type as value type.

Parameters

mesh	the seam mesh
first,beyond	the range of cones, as vertex descriptors of the base mesh.
cones	an object of type ConeMap. Cones will be stored in this container as vertex descriptors of the seam mesh, along with their associated cone types.

Examples:

Surface_mesh_parameterization/orbifold.cpp.

locate_unordered_cones()

template<typename SeamMesh , typename ConeInputBidirectionalIterator , typename ConeMap >

bool CGAL::Surface_mesh_parameterization::locate_unordered_cones	(	const SeamMesh &	mesh,
		ConeInputBidirectionalIterator	first,
		ConeInputBidirectionalIterator	beyond,
		ConeMap &	cones
	)

#include <CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h>

Same as above, but the cones are not ordered and we thus use seam mesh information to determine which cones are extremities of the seam (so-called unique cones) or not (so-called duplicate cones).

read_cones() [1/4]

template<typename TriangleMesh , typename VertexIndexMap , typename ConeOutputIterator >

Error_code CGAL::Surface_mesh_parameterization::read_cones	(	const TriangleMesh &	tm,
		std::ifstream &	in,
		VertexIndexMap	vpmap,
		ConeOutputIterator	out
	)

#include <CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h>

reads a series of cones from an input stream.

Cones are passed as an integer value that is the index of a vertex handle in the mesh tm, using the vertex index property map vpmap for correspondency.

Attention

The mesh is here tm, it is the base mesh of the CGAL::Seam_mesh that is passed in input, not the seam mesh itself.

Template Parameters

TriangleMesh	A triangle mesh, model of FaceListGraph and HalfedgeListGraph.
VertexIndexMap	must be a model of ReadablePropertyMap with boost::graph_traits<TriangleMesh>::vertex_descriptor as key type and a unique integer as value type.
ConeOutputIterator	a model of OutputIterator with value type boost::graph_traits<TriangleMesh>::vertex_descriptor.

Parameters

tm	the triangular mesh to be parameterized
in	the input stream
vpmap	an initialized vertex index map
out	the output iterator

Precondition

The number of cones must match the chosen Orbifold_type .

No two cones correspond to the same vertex (all cones have different index).

Returns

The corresponding vertex descriptors are output, in the same order as the input integers, in out. The function checks if the input is valid (no duplicate, correct number of cones) and returns an Error_code.

read_cones() [2/4]

template<typename TriangleMesh , typename ConeOutputIterator >

Error_code CGAL::Surface_mesh_parameterization::read_cones	(	const TriangleMesh &	tm,
		std::ifstream &	in,
		ConeOutputIterator	out
	)

#include <CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h>

Same as above, using the default indexation of the vertices of tm: vertices are numbered from 0 to num_vertices(tm)-1, in the order that they appear while calling vertices(tm).

read_cones() [3/4]

template<typename TriangleMesh , typename VertexIndexMap , typename ConeOutputIterator >

Error_code CGAL::Surface_mesh_parameterization::read_cones	(	const TriangleMesh &	tm,
		const char *	filename,
		VertexIndexMap	vpmap,
		ConeOutputIterator	out
	)

#include <CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h>

Same as above, but from a file instead of a stream.

read_cones() [4/4]

template<typename TriangleMesh , typename ConeOutputIterator >

Error_code CGAL::Surface_mesh_parameterization::read_cones	(	const TriangleMesh &	tm,
		const char *	filename,
		ConeOutputIterator	out
	)

#include <CGAL/Surface_mesh_parameterization/Orbifold_Tutte_parameterizer_3.h>

Same as above, but from a file instead of a stream.

The default indexation of the vertices of tm is used: vertices are numbered from 0 to num_vertices(tm)-1, in the order that they appear while calling vertices(tm).